Category: A-B

The Allen-Bradley 6186M-15PTSS is an industrial performance monitor: The Allen-Bradley 6186M-15PTSS is an industrial performance monitor.

It features a 15-inch colour active matrix TFT LCD with a native resolution of 1024 x 768 pixels.

It has a resistive touch input interface with a stainless steel bezel. It is powered by an external AC power supply with a voltage range of 100-240 VAC, 47-63 Hz.

It has RGB analogue video input signals and HD-15 VGA and DVI video input connectors.

The 6186M-15PTSS is an industrial performance monitor manufactured by Allen-Bradley.

The monitor can be used with commercially available computers and third-party industrial computers. For Allen-Bradley products.

It is especially compatible with VersaView and industrial non-monitor computers. The monitor has a video input port to provide visualisation.

The 6186M-15PTSS features a 15-inch screen with a native resolution of 1024×768. but optional frequencies and refresh rates are available.

such as 720 x 400 @ 70 Hz; 640 x 480 @ 60 Hz, 75 Hz; 800 x 600 @ 60 Hz, 75 Hz.

1024 x 768 @ 60 Hz, 70 Hz, 75 Hz; 1280 x 1024 @ 60 Hz, 75 Hz, with a response time of less than 35 ms.

The display features resistive touch screen inputs, backlighting and a half-life of 50.000 hours at 25 °C or 77 °F.

Description

The 6180P-15BPXPDC display computer is an Allen-Bradley/Rockwell Automation VersaView display computer.

Uses DC power: The 6180P-15BPXPDC display computer is an Allen-Bradley/Rockwell Automation VersaView display computer that uses DC power.

It operates on a range of 18 to 32 volts D.C. The 6180P-15BPXPDC display computer has a 15-inch wide screen that serves as both a display and a touch screen.

The 6180P-15BPXPDC display computer screen is 15 inches wide and serves as both a display and a touch screen. The screen supports full colour graphics.

The 6180P-15BPXPDC display computer also has a keypad for control with the touch screen.

The Allen-Bradley 6180P-15BPXPDC is a VersaView Plus integrated display computer with a keypad and touchscreen.

The computer can be used as an industrial computer or operator input station. It has a 15-inch touchscreen colour active matrix thin film transistor display.

The display area is 12 x 9 inches with a native resolution of 1024 x 768. The display has a response time of 20 milliseconds and can be fitted with an anti-glare cover.

The computer has a horizontal viewing angle of 60Ëš and a vertical viewing angle of 40Ëš. The 6180P-15BPXPDC computer provides 44 function keys.

The entire computer measures approximately 13.97 x 19.01 x 8.86 inches and weighs approximately 38.8 pounds.

The computer has an Intel 945GME system chipset, dual-channel DDR II memory slots, and two DIMM slots.

Up to 2 GB of memory can be installed in each slot, with a maximum of 4 GB of system memory.

It also comes with 1 full-length ISA expansion slot, 2 full-length slots and 1 half-length slot, PCI 2.2. 5V I/O PCI expansion slot.

The 6180P-15BPXPDC features a hot-swappable 3.5-inch SATA-interface 160 GB hard drive and a slim DVD-RW drive.

Available audio jacks include a microphone in jack, line in jack, and line out jack.

The 6180P-15BPXPDC computer also offers multiple input/output ports, including a parallel port, two serial ports, and a DVI port,

4 rear USB ports and 2 front USB ports. The computer also has 2 RJ45 Ethernet LAN ports at 10/100/1000 Mbps.

Description: The Allen-Bradley 6176M-19VN monitor is a 19-inch display monitor in the Allen-Bradley/Rockwell Automation VersaView series.

Automation VersaView series, a 19-inch display monitor.

It displays data clearly with colour graphics on an active matrix TFT display.

The 6176M-19VN monitor has a USB port for connecting a mouse and keyboard.

It can also be connected to a non-monitor computer and used as a monitor for that computer.

The 6176M-19VN monitor is rated for input voltages from 90 to 264 volts AC and frequencies from 47 to 63 Hz.

Allen-Bradley’s 6176M-19VN 1900M industrial monitor is a standard industrial monitor.

The 6176M-19VN 1900M Industrial Monitor from Allen-Bradley is a standard industrial monitor that provides an interface through a 19-inch colour active matrix TFT LCD screen. It has a display area of 14.8 x 11.9 in.

The display resolution is 1280 x 1024 pixels with approximately 16.7 million colours. 6176M-19VN has a display brightness of 300 cd/m2 Nits and a display contrast ratio of 800 ratio 1.

The 6176M-19VN has a display brightness of 300 cd/m2 Nits and a display contrast ratio of 800 to 1. It also features an aluminium bezel and CCFT backlighting for 50.000 hours of standby time.

The 6176M-19VN also offers automatic screen setup for easy control of screen contrast, brightness, image lock, colour balance,

synchronisation detection, and vertical and horizontal positioning. Users can set up and maintain analogue and digital video signals via VGA and DVI signal inputs.

The 6176M-19VN uses an AC input power supply rated from 90 to 264 volts AC.

It draws 42 watts at 3.5 amps at 47 to 63 Hz. It has an operating temperature limit of -20 to 60 degrees Celsius (-4 to 140 degrees Fahrenheit).

relative humidity from 10% to 90% (non-condensing), a functional shock rating of 15 G, and a vibration frequency of 53 to 640 Hz with an amplitude of approximately 1 G. The 6176M-19VN is a 3.5 Amp, 47 to 63 Hz, 42 Watt power consumption.

The 1336-R1-SP4A PC board can be used as a buffer resistor spare part kit for power supplies on 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS drives.

The 1336-R1-SP4A PC board can be used as a replacement buffer resistor inverter for the power supply module on 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS drives.

The Allen-Bradley 1336-R1-SP4A Buffer Resistor or PC Board is a spare parts kit for AC drive power supplies, modules, and buffer resistor inverters.

The 1336-R1-SP4A buffer resistor can be used as a replacement buffer resistor for the 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS series.

The 1336-R1-SP4A buffer resistor can be used as a replacement buffer resistor inverter for the 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS series drive power modules.

The 1336 IMPACT, 1336 PLUS II, and 1336 PLUS series drives are variable frequency AC drives. The output power ratings for each of these drive series are:

0.37 to 448 kW for 1336 PLUS II drives, 0.37 to 597 kW for 1336 IMPACT drives.

1336 PLUS drive 0.37 to 448 kW.

Buffer resistors such as the 1336-R1-SP4A are designed to eliminate voltage spikes in circuits caused by circuit inductance.

These voltage spikes are generated when a semiconductor or mechanical switch is turned on.

A simple snubber circuit consists of a capacitor and a series-connected snubber resistor across a switch.

The 1336-R1-SP4A snubber resistor is compatible with the Frame F inverters in the Allen-Bradley AC Inverter product line described above.

Each power module requires 3 spare part kits. 1336-R1-SP4A snubber resistors are available for AC drives rated at 250. 300. 250. 400. and 450 hp output power.

The 1336-R1-SP4A buffer resistors are available for AC drives with higher internal voltages and currents.

Only a technician familiar with the Allen-Bradley 1336 AC drives should plan and perform the drive installation and repair process.

Before servicing, ensure that the bus capacitors are fully discharged. Failure to do so may result in electric shock.

The 1492-IFM40F-F24-2 module, manufactured by Allen-Bradley, is a wiring module with fixed terminal blocks.

This module is a digital module. It can be used as part of a wiring system for Allen-Bradley 1492 series digital/analog programmable controllers and connects to Allen-Bradley 1746 series I/O modules.

and connects to Allen-Bradley 1746 series I/O modules. This is a fusible link module.

The 1492-IFM40F-F24-2 module has a voltage range of 10 to 30 volts AC or DC and a maximum current of 2 amps per circuit.

Each module has a maximum current of 12 amps. It measures 8.27 x 3.27 x 2.78 inches.

The 1492-IFM40F-F24-2 module is easy to wire with minimal installation time and wiring errors.

The Allen-Bradley 1492-IFM40F-F24-2 digital wiring module meets CE, cULus, and UL standards.

It has a T3C temperature code of 60 degrees Celsius. The module is also approved for use in Class 1 Division 2 hazardous locations.

The 1492-IFM40F-F24-2 module is designed to function like a set of terminal blocks with multiple cable connectors and I/O points.

It also features a fuse clip and LED indicators that can be customised for various applications.

The module can be mounted on a standard #3 DIN rail.

The 1492-IFM40F-F24-2 Digital Wiring Module features a field-side terminal block for each programmable controller output or input point.

This module is ideal for applications that require common terminals for remote or field terminated I/O devices.

Description of the 1492-XIMTR4024-32R Module

The 1492-XIMTR4024-32R module is an Allen-Bradley 40-pin relay digital interface module.

It has 32 relays and is rated at 24 volts DC.

It is part of the Bulletin 1492 High Density Relay Module, which is half the size and offers improved performance over older relay modules.

The 1492-XIMTR4024-32R module is an Allen-Bradley 40-pin relay digital interface module.

with 32 relays rated at 24 volts DC. It is part of Bulletin’s 1492 family of high-density relay modules.

It is half the size of traditional relay modules with improved performance.

The new relay modules in this series provide 6 amps of switching capacity current (8 amps per pair).

Ideal for installations requiring higher switching capacity than PLC output modules. These new high density relay modules eliminate the need for expansion relay modules.

Both solid state and electromechanical relays can be used with the modules.

The 1492 High Density Relay Modules are compatible with all Allen-Bradley PLC systems and can also be integrated with PlantPAx process automation systems.

Manage motion control, drives, application processes, and safety functions on a single control platform.

The 1492-XIMTR4024-32R module has a maximum repeatable peak voltage of 600 volts AC. Peak current is 2 mA per circuit.

The supported voltage range is 20 to 26 volts DC.

The 1492-XIMTR4024-32R module is CE compliant and cULus compliant for use in non-hazardous locations.

Power supply and input/output wiring must be in accordance with the National Electrical Code Class 1 wiring method.

The Allen-Bradley 6189-RPEHA is a VersaView CE logic module.

Allen-Bradley has discontinued this product and replaced it with the new 2711P-RP7A PanelView Plus CE Logic Module.

It is an intelligent controller that automates machine processes without user intervention.

Its modern, cost-effective and flexible design makes it ideal for complex or simply installed industrial applications.

It is compatible with all VersaView and PanelView Plus CE terminals.

The 6189-RPEHA module requires 100 – 240V AC input power.

For storage, it has a 2711P-RW3 built-in CompactFlash module containing 256 MB of user memory.

It is marine certified and meets the highest standards in the industry. All VersaView devices are now discontinued.

Allen-Bradley has rebranded it as part of the PanelView Plus product family.

It is suitable for use in a clean, dry, overvoltage Class II standard environment with an operating temperature of 0 – 55 °C (32 – 131 °F), an operating shock of 30 g, and a relative humidity of 5 – 90% (non-condensing).

Technical Description of 6189-RPEHA

Discontinued Versaview CE Logic Module with 256 MB RAM, 6189-RW3 internal flash memory, and 100-240 VAC input power.

Description

The Allen-Bradley 1745-LP151 is a programmable logic controller (PLC). This controller is part of the SLC 150 product family.

It comes with embedded twenty (20) 85-132 volt AC inputs; ten (10) 85-265 volt AC triac switch outputs and two (2) relay outputs.

It has an embedded power supply with input supply voltages of 85-132 volts AC/170-265 volts AC; 50/60 Hz.

Allen Bradley’s 1745-LP151 is part of the SLC150 series of programmable controller units.

The part features 12 output terminals and 20 input terminals with a power range of 85-132V AC and CMOS RAM.

This Allen-Bradley SLC 150 processor unit has a High Speed Input (HSI) module capable of counting high speed input signals at rates up to 5kHz.

Up to four high-speed input devices can be counted by each connected unit.

The input voltage level and filter delay time are selectable on the module using dip switches.

Other features of the 1745-LP151 include a voltage range of 85-132/170-265V AC at 50-60 Hz.

Its I/O is twenty 85-132V AC absorption inputs, ten 85-265V AC TRIAC outputs, and two 10-250V AC (10-125V DC) hard contact relay outputs.

The 1745-LP151 unit contains 2 backups: an optional battery backup and a standard capacitor backup.

The 1200-word user memory size has a 0.015-inch peak-to-peak vibration displacement and a peak acceleration of 2.5g at 1Hr/axis.

The 1745-LP151 has an operating temperature range of 32-140°F and a storage temperature range of -40-185°F.

The 1745-LP151 Expansion Unit can be connected to the Processor Unit and other Expansion Units via ribbon cable.

Additional expansions can be made to increase the number of PLC I/O’s to 112.

The Allen-Bradley 1745-LP151 is a programmable logic controller (PLC).

This controller is part of the SLC 150 series, one of the earlier SLC 500 versions.

This controller is used for automation and microprocessor-based control of industrial machines and processes.

It is equipped with a highly programmable memory that allows user programs to be modified and custom designed according to plant requirements.

The Allen-Bradley 1757-FFLDC4 is a ControlNet Foundation fieldbus link device.

The module has four (4) Foundation Fieldbus interfaces and one (1) redundant ControlNet interface.

It supports connection to four (4) H1 Foundation Fieldbus networks, each supporting up to sixteen (16) devices.

This link device supports up to 64 fieldbus devices per link device.

The Allen-Bradley 1757-FFLDC4 device is a ControlNet Foundation fieldbus link device.

has four (4) Foundation fieldbus H1 network connections, allowing up to 64 different fieldbus devices to interact in the Foundation network.

It has an additional ControlNet interface for integrating the device into a ControlNet network for monitoring and control purposes.

The ControlNet address of the device should be manually configured using the two rotary switches located on the front left side of the linked device.

The Allen-Bradley 1757-FFLDC4 ControlNet Foundation fieldbus-connected device requires connection to a rated voltage of 24 volts DC (/-10%)

An external power supply rated at 450 mA. It has an inrush current rating of 1.5 amps and a power consumption of 9.6 watts.

A forced ventilation system or climate control system may be required depending on the total heat emitted by all components mounted within the same panel.

Maximum operating temperature should be kept below 60 degrees Celsius (140 degrees Fahrenheit).

The Allen-Bradley 1757-FFLDC4 ControlNet Foundation Fieldbus Connection Device is sized for easy installation on a DIN rail or in any conventional NEMA 4/12 type enclosure.

The most common DIN rails used to mount this connection device are 35 x 7.5 or 35 x 15 DIN rails.

The 1757-FFLDC4 is a panel mount device and is mounted using M4 or #8 screws.

The unit specifically features four (4) Foundation Fieldbus interfaces and one (1) redundant ControlNet interface.

Up to four (4) H1 Foundation Fieldbus networks can be bridged via ControlNet media, each supporting up to sixteen (16) devices.

In total, one (1) 1757-FFLDC4 is capable of connecting up to sixty-four (64) fieldbus devices.

Description

Allen-Bradley PLC 5 high resolution TC/millivolt inputs, natural binary data format, 750 mA backplane current, no external power supply required.

The Allen-Bradley 1771-IXHR is a PLC 5 analogue input module. It is a high-resolution thermocouple/millivolt input module that

used to transfer input data words from its memory to the PLC processor’s data table and to transfer configuration words using block transfer programming.

The 1771-IXHR requires a slot in the 1771 I/O chassis and does not require an external power supply.

The 1771-IXHR module has eight floating differential inputs for thermocouple or millivolt input ranges.

Includes thermocouple types B, E, J, K, T, R, and S and ±100 millivolts. Allows 8 inputs of the same type or allows 4 inputs of different types.

The 1771-IXHR includes cold-end compensation with an accuracy range of 0-60°C and ±0.5°C. It has selectable temperature scales of °C or °F with a temperature resolution of 0.1°C or 0.1°F and a millivolt resolution of 1µV.

It requires a backplane current load of 750mA at 5V and has a channel update time of 25ms per 8 channels.

Its wiring is connected to the 1771-WI field wiring arm, eliminating the need to disconnect the wiring when replacing the module.

The 1771-IXHR has a maximum power consumption of 4.255W and a maximum heat dissipation of 14.5 BTU/hour.

The keying strap must be placed between pins 20-22 and pins 24-26 to accept only this module.

The 1771-IXHR module has user-selectable high and low temperature alarms.

It contains a green RUN indicator and a red FLT indicator on the front panel to indicate power and fault status.

When powered on, it performs self-diagnostics and reports status.1771-IXHR provides open-circuit detection in the event of a thermocouple failure.

It automatically calibrates the offset and gain of each channel without potentiometers.