Product Specifications

The DeltaV Smart Switches is based on hardware produced

by a recognized supplier of industrial-grade networking

equipment. All switches are fan-less and have redundant

power connections. Same models are also available in high

temperature, conformal coated versions for use in harsh

environments. The firmware features are identical in all models

of the DeltaV Smart Switch.

The DeltaV Smart Switches are preconfigured for use exclusively

within the DeltaV control network or the networks listed in

Table 1 above. All switch configuration is performed using

the DeltaV Network Device Command Center [for DeltaV

10.3 configuration is only done through the DeltaV Setup

Wizard using the serial port Command Line Interface]. These

configuration interfaces provide very limited access to switch

configuration parameters. General administrator access to the

DeltaV Smart Switches is disabled to prevent possible mis

configuration of the switch that would impact DeltaV network

performance. A list of the available configuration parameters is

listed in the DeltaV Setup Parameter section of these specifications.