Category: KEBA

Description

The 3500/65 monitor provides 16 channels of temperature

monitoring and accepts both resistance temperature

detector (RTD) and isolated tip thermocouple (TC)

temperature inputs.  The monitor conditions these inputs and

compares them against user-programmable alarm

setpoints.

The monitor is programmed using the 3500 Rack

Configuration Software.  You can configure the 16-Channel

Temperature Monitor to accept isolated tip thermocouples,

3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs.

In Triple Modular Redundant (TMR) configurations, you must

install temperature monitors in groups of 3 adjacent

monitors. In this configuration the monitor uses 2 types of

voting to ensure accurate operation and to avoid single

point failures.

Specifications

Inputs

Power Consumption ：3 watts nominal

Signal ：Accepts from 1 to 16 RTD or isolated tip TC transducer signals.

Input Impedance ：Greater than 1 MΩ for each lead input.

Transducers

TCs

Type E：-100°C to +1000°C, (-148°F to +1832°F)

Type J： 0°C to +760 °C , (32°F to +1400  °F)

Type K：0°C to +1370°C , (32°F to +2498°F)

Type T：-160°C to +400°C, ( -256°F to +752°F)

Safety certified wireless technology SIL3 Cat4 PLe

The need for mobile HMIs has expanded even further into large

area robotics, production lines, and intralogistics. KEBA is the

first to have a solution with robust wireless safety technology,

testing, and certification.

//  Bluetooth 4.2 Technology for proximity or remote safety pairing

HMI to machine base stations

//  Safety devices when paired to base station are enabled with a

range of up to 20 meters

//  Non safety data is communicated over WiFi whether safety

pairing is active or not. For example, HMI software data.

//   High speed safety response times of less than 100ms

//   Multiple base stations and HMIs can operate on the same

network to ensure safe operations in local areas

//   Optional: Configurable operation area monitoring ensures

the operator stays in range and provides warnings if operator

moves outside the area before operations are stopped

Wireless Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into

one device for simple and mobile operator control that

increases productivity and safety.

KeTop T150/155 Safe Wireless Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator‘s control of the

complete automation cell

//  Runs Windows 10 or HTML5 HMI software

//  Rugged IP65 rating, drop and vibration tested, globally trusted

HMI in the robotics industry

//  Projected Capacitive Multi Touch screen (PCT) for fast respon

se and gloved operation

//  Fast response membrane keypad with communication to PLC

or Robot for accurate control

//  E-Stop and safety enable provides safe operation with robots,

machine motion, and safety monitored areas

Industrial Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into one device

for simple and mobile operator control that increases productivity and safety.

KeTop T150/155 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator’s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally

trusted HMI in the robotics industry

//  Projected Capacitive Multi Touch screen (PCT) for fast

response and thin gloved operation

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas

Open software compatibility

Install any Windows or HTML5 HMI software to run on the

mobile HMI. Use with many popular global HMI software

programs. Linux OS available upon request.

KeTop T150/155 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator’s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally

trusted HMI in the robotics industry

//  Projected Capacitive Multi Touch screen (PCT) for fast

response and thin gloved operation

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas

Wireless Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into

one device for simple and mobile operator control that

increases productivity and safety.

KeTop T70 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator‘s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally trus

ted HMI in the robotics industry

// Analog resistive touch screen

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas

Open software compatibility

Install any Windows or HTML5 HMI software to run on the

mobile HMI. Use with many popular global HMI software

programs. Linux OS available upon request.

KeTop T70 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator‘s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally trus

ted HMI in the robotics industry

// Analog resistive touch screen

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas

Interfaces to CPU module

SX 210/A SX 220/A SX 230/A

Type of interface Option-module interface

Power consumption 0.2 W; supply

via CPU module

1.0 W; supply

via CPU module

0.1 W; supply

via CPU module

Module detection Yes (no type detection)

Mechanical data

Structure Front plate mounted directly on PCB; without housing

Protection rating IP20 if the module is plugged into the CPU module

Weight 31 g

Environmental conditions

Operating temperature +5 °C … +55 °C

Storage temperature-40 °C … +70 °C

Relative air humidity 10 % to 95 % (non-condensing)

Vibration resistance / shock

resistance Acc. to EN 61131-2

Product features

• Serial interface RS232.

RS 422/485-A or Current Loop

• Full-duplex operation

• High interference immunity

Short description

Serial interface modules of the SX 2×0/A series are used as an option directly in a CP 23x or in a CP 26x

CPU module.

They enable the connection of an RS 232. RS 422/485-A or Current Loop serial interface. This interface

operates in full duplex mode with a maximum transmission rate of 115.000 baud.

The Current Loop interface (SM 220/A) functions both for transmitter as well as for the receiver in active

or passive operation. The operating mode is switched on the side on the PCB via DIP switches.

Product features

• Ethernet interface

• 10/100 Mbit/s transmission rate

Short description

The NX 252/A is an Ethernet PCI module that is directly plugged into a CP-26x-CPU module, thereby

expanding this module with an additional RJ45 Ethernet interface. The transmission rate is 10/100 Mbit/s;

the states are indicated by means of transmission and reception LEDs. The NX 252/A is equipped with an

electronic parameter chip.

Ethernet interface

Ethernet interface 10/100 Mbit/s LAN

Galvanic isolation Yes, signal lines

Connection Modular plug, 8-pin (RJ45 plug)

Interface to CPU module:

Type of interface PCI

Power consumption 2 W, supply via CPU module

Module detection Yes (no type detection)

Mechanical data

Structure PCI plug-in module, front plate mounted on PCB; no housing

Protection rating IP20 if the module is plugged into the CPU module

Weight 65 g

Environmental conditions

Operating temperature +5 °C … +55 °C

Storage temperature-40 °C … +70 °C

Relative air humidity 10 % to 95 % (non-condensing)

Vibration resistance / shock resistance Acc. to EN 61131-2