TranSITIon ModulES

The MVME761 transition module provides industry

standard connector access to the IEEE 1284 parallel

port, a 10BaseT or 100BaseT port via an RJ-45

connector, two DB-9 connectors providing access to

the asynchronous serial ports configured as EIA-574

DTE and two HD-26 connectors providing access to

the sync/async serial ports. These serial ports, labeled

as Serial 3 and Serial 4 on the faceplate of the MVME761.

are individually user-configurable as EIA-232. DCE or

DTE via the installation of Emerson Serial Interface

Modules (SIMs). A P2 adapter board provides interface

signals to the MVME761 transition module. Two

separate P2 adapter boards are available: one for 3-row

backplanes and one for 5-row backplanes. The 3-row

P2 adapter board provides connection for 8-bit SCSI.

A 5-row P2 adapter board supports 16-bit SCSI and

PMC I/O.

The MVME712M transition module provides

industry-standard connector access to the Centronics

parallel port, a narrow SCSI port, and four DB-25

connectors providing access to the asynchronous/

synchronous serial ports jumper configurable as

EIA-232 DCE or DTE. A P2 adapter board provides

interface signals to the MVME712M transition

module. The 3-row P2 adapter board also provides

connection for 8-bit SCSI. To gain access to the

additional user-definable I/O pins provided via the 5-row

VME64 extension connector, a special P2 adapter

board is available. This adapter panel replaces the

traditional 3-row P2 adapter board and extends its

capability by providing access to the PMC I/O pins.