Category: Woodward

FEATURES

 16 configurable discrete inputs

 CAN bus communication to the higher-level controller

 The control unit evaluates the status of these discrete inputs and depending on the configura

tion of the control unit takes an appropriate action

 The IKD-IN-16 can be used with other manufacturer’s controllers/PLCs. Consult product man

ual 37953 for information regarding the CAN bus data telegram

 DIP switches to configure device module number and CAN baud rate.

 Power, CAN, and DI status LEDs

Ordering Part Number

 8440-2304

IKD-IN-16 Unique Features

16 configurable digital inputs

plug-n-play connection with Wood ward power management controls

easy integration with PLC

compact remote I/O with IKD-OUT-16

Shorter lead time

 Flexible remote input module. Works with

 Woodward power management controls

 PLC

 16 discrete inputs

 Requires no configuration tool

 CAN bus communication

 CE/UKCA marked

 UL/cUL pending

TYPICAL APPLICATIONS

The digital inputs are read by the IKD 1 and transferred via the

CAN bus to the control unit (incl. alarm class). Each alarm

input may have a delay as well as the control logic (NO/NC)

configured individually during set up. The status of the alarm

input is monitored in the control device and will show the alarm

text in its display. The alarm class assigned in the control

device evaluates the alarm input and reacts accordingly.

The control device’s relay manager controls the IKD 1 relays.

The control logic for each IKD 1 relay can be programmed

individually in the control device. Logical commands can be

configured using internal events as well as the status of the

digital inputs coming from the IKD 1.

If a discrete input on the IKD 1 is enabled, the control device

displays a text message and the control functions of the alarm

class are executed (refer to all manuals relating to the control

device). The control device must operate the IKD 1 relays.

SPECIFICATIONS

Power supply ………………………………….. 12/24 Vdc (6 to 36 Vdc)

Intrinsic consumption …………………………………………… max. 3 W

Ambient temperature ……………………………………….. -40 to 85 °C

Ambient humidity ………………………………. 95 %, non-condensing

Discrete inputs …………………………………………………….. isolated

Input range …………………………………….. 12/24 Vdc (6 to 32 Vdc)

Input resistance …………………………………………… approx. 6.8 kΩ

Relay outputs ………………………………………………………. isolated

Contact material …………………………………………………….. AgCdO

Load (GP) …………………………………………….. 2.00 Aac@250 Vac

…. 2.00 Adc@24 Vdc / 0.36 Adc@125 Vdc / 0.18 Adc@250 Vdc

Pilot duty (PD) ……………………………………………………………………

…. 1.00 Adc@24 Vdc / 0.22 Adc@125 Vdc / 0.10 Adc@250 Vdc

Service interface ………………………………………………………………

Version ………………………………………………………………… RS-232

CAN interface ………………………………………………………. isolated

Insulation voltage (continuously) …………………………….. 100 Vac

Insulation test voltage (≤ 5 s) ……………………………….. 1.000 Vac

Version ……………………………………………………………….. CAN bus

DESCRIPTION

Features

•8 configurable discrete alarm inputs

•8 configurable FORM C relays with

potential free contacts

•Configurable delays for each input

•CAN bus communication

•The discrete inputs transfer their

status via CAN bus to the control unit.

•The control unit evaluates the status

of these discrete inputs coming from

the IKD 1 and depending on the

configuration of the control unit, will

take the appropriate action.

•The control unit can send commands

via the CAN bus to remotely control

the output relays of the IKD 1.

•The IKD 1 can be used with other

manufacturer’s controllers. Consult

product manual 37135 for information

regarding the address assignments of

the CAN bus interface.

Product Number P/N

•8440-2028

• 8 discrete inputs

• 8 relay outputs FORM C

• PC configurable1)

• CAN bus communication

•Microprocessor technology for accurate, repeatable and reliable operation

• CE marked

•UL/cUL Listing

APPLICATIONS

The IKD 1 is a smart solution to increase

numbers of digital I/O’s to Woodward easYgen

series controllers and GCP-31/32 packages

equipped with option SC10 or SC09.

It is possible to connect one or more IKD 1

units to the genset controllers (see table

Related Products below).

Each of the inputs can be assigned a name,

alarm class, NO/NC configuration and time de

lay. The name and class are displayed on the

connected genset controller’s display.

The IKD 1 output relays are controlled over the

CAN bus connection from the main genset

controller. Configuration of the IKD 1 is

performed through the relay manager in the

main controller and transmitted to the IKD 1.

A direct configuration cable (DPC) and software

can be purchased for use with a PC or laptop

and may be advisable for extensive

configuration applications or where several

similar units are to be set up.

Related Products

max. # of IKD 1

•GCP-3… XPQ+SC09 2

•GCP-3… XPQ+SC10 2

•easYgen-1000 series 2

•easYgen-2000 series 2

•easYgen-3100P1/3200P1 2

easYgen-3100P2/3200P2 4

•easYgen-3400/3500P2 4

DTSC-200A Unique Features

✓ Built on field proven DTSC-200

✓ New face plate with tactile buttons

✓ Large LCD display

✓ Programmable from HMI panel or ser

vice tool (USB connection)

✓ Shorter lead time

• Premium ATS control for complex transfer switch applications for critical power assets. Supports,

• Circuit breakers or latching contactors

• Open, delayed, or closed transition transfer

• Make-before-break (<100ms) transfer or extended indefinitely for paralleling

• In-phase monitoring (synch check) for all transition types

• Engine exerciser (load/no-load) routine with fully adjustable interval

• Load shed and restore

• Elevator pre-signal

• Transfer/return inhibit

• Adjustable timers and bypass

• Priority source selection

• Freely configurable,expandable discrete I/O

• CANopen / Modbus RTU

• PC and/or front display configuration with password protection

• CE marked

• UL recognized UL1008

RELATED PRODUCTS

• I/O Expansion Board IKD1 (Product spec. # 37171)

• ToolKit (Product spec. # 03366)

• Genset controller easYgen-3200XT & easYgen-3500XT (Product spec. # 37582 and #37583)

• Circuit breaker controller easYgen | LS-6XT (Product spec. #37913)

• CANbus to Fiber Optic Converters (Application note # 37598):

DL-CAN P/N 8445-1049 and DL-CAN-R P/N 8445-1048

• Remote Access Gateway (with HMS Netbiter EasyConnect EC250 and EC350)

• Phoenix expansion CAN Couplers

• Make-before-break (<100ms) transfer or extended indefinitely for paralleling

• In-phase monitoring (synch check) for all transition types

• Engine exerciser (load/no-load) routine with fully adjustable interval

• Load shed and restore

• Elevator pre-signal

• Transfer/return inhibit

• Adjustable timers and bypass

• Priority source selection

• Freely configurable,expandable discrete I/O

• CANopen / Modbus RTU

• PC and/or front display configuration with password protection

• CE marked

• UL recognized UL1008

FEATURES

• True R.M.S. 3-phase voltage measuring for both Source 1 and Source 2

• True R.M.S. 3-phase load current/power

• Software configurable for wide range of ATS applications:

• Utility-to-Generator: Utility is preferred with a generator as emergency source

• Generator-to-Generator: One genset is preferred with a second genset as backup

• Utility-to-Utility: Utility is preferred with second utility as the emergency source

• Incorporates several monitoring features for a secure transfer: Source, Load, Switch, Battery, In-phase,

and parallel time monitor

• Intelligent limit switch feedback monitoring to ensure plausibility before initiating a transfer

• Fully configurable transfer command pulse configuration

• Inhibit transfer to S1. S2. both or start emergency source but initiate no transfer

• Elevator pre-signal with timer before carrying out a transfer

• Motor load disconnect signal with timer and possibility to daisy chain multiple MLDs for load

sequencing

• Source priority selection configurable via LogicsManager

• Load test and engine test to initiate routine health check of the emergency source

• In-phase monitoring ensures a transfer occurs within a phase angle difference of 70 or less

• Extended parallel time enables soft loading applications

• Vector group adjustment if transformers are used in the ATS system

• Shunt trip enable signal ensures both sources are not paralleled for more than desired time

• Remote control via interface (CANopen, Modbus RTU) and via discrete inputs

• I/O expansion capability (additional 16x DI and 16x DO supported via IKD1M or 3rd party modules)

• Adjustable display backlight shutdown to reduce power consumption

• Woodward ToolKit™ software for flexible setup from a single connection to the network. Supports

settings file created from the DTSC-200

• Multi-lingual capability: English, German, Spanish, Polish, Russian, other languages upon request

DESCRIPTION

The DTSC-200A (Digital Transfer Switch Control) controls the transfer of electrical power from one source

to another for hospitals, data centers, office buildings, manufacturing plants and similar where lights out

is not an option. The extremely versatile DTSC-200A ATS controller is easily configured for a wide range of

automatictransfer switch applications including Main-Gen, Gen-Gen or Main-Main systems using circuit

breakers or latching contactors. 

Source transfer can be performed as open, delayed, or closed transition with in-phase monitor

ing (synch check) that can be enabled for all transition types to ensure safe transfer. The closed transition

over lap time can be limited to less than 100ms for momentary, make-before-break transfers, or extended

indefinitely for paralleling via discrete input. “Custom” features like transfer inhibit, source selection, load

shed/restore, elevator pre-signal and engine test programs come standard.

LogicsManagerTM – Programmable Boolean logic functions along with ample, expandable discrete I/O

allows for complex transfer schemes without using external relay logic or a separate PLC!

FlexAppTM- Easily configures the DTSC-200A for: Utility-to-Generator, Generator-to-Generator or Utility-

to-Utility applications.

DynamicsLCDTM- The adaptive and interactive 4.3”, 480 x 272-pixel TFT LC display with tactile buttons a

clear menu structure ensure intuitive user operation and navigation.

FURTHER SPM-D SYNCHRONIZERS

• The SPM-D10 Series provides two-phase generator and bus measurement

refer to product specifications 37297 for more information

• The SPM-D10/YB Series provides three-phase generator and bus measurement

refer to product specifications 37298 for more information

Mains parallel operation

• Real power control

• True RMS power calculation

• Generator real power setpoint by parameter (2 values) or via 0/4 to 20 mA

• Soft unloading

• Power factor control

• Power factor setpoint by parameter

• Power limit value with relay output

Dead bus operation

• Closing of breaker on demand

• Load/var sharing

• Generator protection

• Synchronization for one circuit breaker

• Frequency, phase, and voltage matching

• Selectable types of control output

• Digital display of generator and bus values

• Real power control

• Power factor control

• PC and front panel configurable

• Microprocessor technology for flexible and reliable operation

• CE marked

• UL/cUL listed