Category: Honeywell

Remote Terminal Panels

Optional DIN rail mounted Remote Terminal Panels (RTPs)

are available for use with pre-wired cables to reduce installation

time and labor expense. Four types of RTPs are available:

 analog inputs, relay outputs, redundant I/O and other I/O modules.

Three cable lengths are also available to match hardware to installation variations.

Analog inputs RTPs include transmitter

shunt resistors and transmitter power terminals with individual circuit fuses.

The Relay Output RTP includes a fuse and power disconnect switch for each output.

All the three types of RTP panels also switch power to allow module removal and

installation under controller power. See page 36.

Terminal Blocks

20-screw Barrier style and Euro style terminal blocks are available

for use with all ControlEdge HC900 I/O Modules.

Red terminal blocks are used for high voltage connections

for added safety while black terminal blocks are used for low voltage connections.

A 36-terminal Euro style block is available with the 16 AI, the 8 and 16 AO

as well as the 32 DC DI and 32 DC DO module types.

Failsafe

All ControlEdge 900 Platform I/O modules support a user

specified failsafe value (analog) or state (digital) that the

module outputs or inputs will assume if communication

between the controller and the module is interrupted. Output

modules are also disabled if the controller fails to start.

Module diagnostics are not initiated if the control strategy

does not call for the inputs or outputs on the modules to execute.

Failsafe is restricted to de-energize in safety applications.

20-screw Barrier style and Euro style terminal blocks are available

for use with all ControlEdge HC900 I/O Modules.

Red terminal blocks are used for high voltage connections

for added safety while black terminal blocks are used for low voltage connections.

A 36-terminal Euro style block is available with the 16 AI, the 8 and 16 AO

as well as the 32 DC DI and 32 DC DO module types.

Overview

The Honeywell ControlEdge HC900 Controller is an

advanced loop and logic controller offering a modular design

sized to satisfy the control and data acquisition needs of a

wide range of process equipment.

Insert and Removal of I/O under Power

For ease of maintenance, the ControlEdge HC900 controller

supports removing and inserting I/O modules from the

module rack without removing power from the controller.

Each module is sensed for validity by the controller

and auto-configured on insertion.

Other Modules

In addition to I/O, the following modules are available.

• Scanner 1 module, single port (p.33)

• Scanner 2 Module, dual port (p.34)

• Universal AC Power Supply, 60W (p.6)

• Power Supply 24VDC, 60W (p.6)

• Redundant Switch Module (p.35)

• Power Status Module (p.35)

I/O Modules

The following I/O modules are available to create a custom 

control solution.

• 16 Channel Universal IO Module Galavanically isolated

Input/Output to chassis (p.29)

• 8-point universal analog input modules: Galvanic

isolation point to chassis inputs may be mixed on a

module and may include multiple thermocouple types,

RTDs, ohms, voltage or mill voltage types – all easily

assigned using the Process Control Designer

configuration tool. High point-to-point galvanic isolation

simplifies installation and saves the expense of external

isolation hardware (p.8).

• 16-point high level analog input module: each point is

configurable for V or mA. Galvanically isolated point to

chassis. Galvanically isolated point to point (p.12). 250

ohm shunt resistors can be added per channel.

• 4-point galvanically isolated analog output module.

Galvanically isolated point to chassis supports from 0 to

20mA each (p.14).

• 8-point analog output, galvanically isolated in 2 groups

of 4 points. Galvanically isolated point to chassis.

Supports from 0 to 20mA each (p.15).

• 16-point analog output, galvanically isolated in 4 groups

of 4 points. Galvanically isolated point to chassis.

Supports from 0 to 20mA each (p.16).

• 16-point digital input modules: Contact closure type, DC

Voltage, AC Voltage and AC/DC voltage types (p.17).

Galvanically isolated in groups of 8 channel to chassis

• 32-point digital input module: DC voltage. Galvanically

isolated point to chassis. Galvanically isolated in 2

groups of 16 points (p.2117).

• 8-point AC or 16-point DC digital output modules

(sinking type). Galvanically isolated point to chassis.

Galvanically isolated in 2 groups of 8 points (p.20).

• 32-point digital output: DC voltage (sourcing type).

Galvanically isolated point to chassis. Galvanically

isolated in 2 groups of 16 points (p.25).

• 8-point relay output module: four form C type and four

form A type relays. Galvanically isolated point to

chassis. Galvanically isolated relay to relay (p.22).

• 4 channel Pulse/Frequency/Quadrature I/O module.

Galvanically isolated point to chassis (p.26).

Honeywell’s FSL100 range of Light Industrial/Commercial Flame Detectors

enables simple coverage of fire hazard areas across many fire hazard applications.

Installation, set-up and operation are simple.

Wide solid area coverage and fast speed of response omtimize safety.

With inbuilt automatic test and test lamps available to cover all models, reliability is ensured.

Features & Benefits:

UV, UV/IR and IR3 Flame Detectors to cover a wide range of applications

Robust, simple to install & set-up: Wide angle and fast speed of response

Automatic test and test lamps for simple check and maintenance.

Quick Specs:

FSL100 Flame Detectors – UV, UV/IR and IR3 for light industrial applications

GRP Housing, available in Red or White with optional swivel mount

12-14Vdc, 25mA nominal operation

4 to 20mA and Relay outputs.

Fire and Gas Consultancy Services

Even the best products deserve expert maintenance!

Elevate your gas detectors’ potential with Honeywell’s expert maintenance services!

Maximize uptime, eliminate costs, and ensure on-time, on-budget project completion.

Product Overview:

The newest Optoelectronic flame detector for a wide range of Light Industrial fire detection from

Honeywell Analytics.

A range of middle market Optical Flame Detectors joining the HA FSX High End products.

Addresses a wide range of fire protection applications both indoors and outdoors.

With 3 versions to cover a wide range of flaming fires:

Ultraviolet (UV), Ultraviolet/Infrared (UV/IR) and Triple Infrared (IR3).

Detects wide range of Hydrocarbon & Non-Hydrocarbon firesDetecting a

wide range of Hydrocarbon and Non-Hydrocarbon flaming fires means that many application areas can

be addressed.

Wide viewing angleOptical detection of radiant energy in a solid angle

Field of View enables coverage of a large risk area.

Simple optional mounting bracket allows the FSL100 to be installed and aligned covering the hazard.

Fast responseFar faster than other technologies, by responding to flaming fires

in seconds enabling a more rapid response to danger before the fire can escalate.

FM Class1. 2 & 3 Div2Can be installed indoors or outdoors and in

Hazardous areas typically looking into a Div 1 area from a distance.

Honeywell’s FSL100 range of Light Industrial/Commercial Flame Detectors

enables simple coverage of fire hazard areas across many fire hazard applications.

Installation, set-up and operation are simple.

Wide solid area coverage and fast speed of response omtimize safety.

With inbuilt automatic test and test lamps available to cover all models, reliability is ensured.

Simple optional mounting bracket allows the FSL100 to be installed and aligned covering the hazard.

Fast responseFar faster than other technologies, by responding to flaming fires

in seconds enabling a more rapid response to danger before the fire can escalate.

FM Class1. 2 & 3 Div2Can be installed indoors or outdoors and in

Hazardous areas typically looking into a Div 1 area from a distance.

FM 3260 performance certCertified to FM 3260 for flame Detector performance.

Relay and current output (Fault and Alarm)

Analog stepped output and Alarm/Fault relays for simple connectivity.

Inbuilt Automatic Test and Simple to use Test LampsFSL100 maintains continuous internal health

monitoring.

Test lamps enable simple operational and Field of View testing.

• Analysis of the flame flicker frequency

for improved false alarm rejection

• Particularly suited to liquid

hydrocarbon and dirty fires

• Affected less by window

contamination or smoky fires

• Good resistance against the

influences of:- Direct and reflected sunlight

– Artificial light, such as fluorescent

tubes and glass covered halogen lamps

– Arcs and electric discharges (static

or from e.g. electric motors)

– The radiation from electric welding

provided that the electric welding

takes place at a distance more

than 10 feet from the flame

detector (a welding rod contains

organic compounds which may produce a small flame)

• Especially suitable fires that emit

large amounts of smoke

UV, UV/IR, IR3 Flame Detectors

The FSL100 Series of flame detectors from Honeywell delivers robust, fast, and

reliable detection of flaming fires in a wide range of applications.

The range consists of UV, UV/IR and IR3 flame detectors.

All utilize sophisticated sensing and signal analysis to

detect fires quickly while also rejecting false alarms.

The FSL100 may be small and lightweight for

easy installation but it is designed to work in

tough indoor/outdoor environments, as well

as potentially explosive atmospheres.

With a large field of view it can

detect a range of different types

of fire including hydrocarbon

and non-hydrocarbon sources.

Available in UV, UV/IR and 3IR we

have your application covered.

UV, UV/IR, IR3 Flame Detectors

The FSL100 Series of flame detectors from Honeywell delivers robust, fast, and

reliable detection of flaming fires in a wide range of applications.

The range consists of UV, UV/IR and IR3 flame detectors.

All utilize sophisticated sensing and signal analysis to

detect fires quickly while also rejecting false alarms.

The FSL100 may be small and lightweight for

easy installation but it is designed to work in

tough indoor/outdoor environments, as well

as potentially explosive atmospheres.

With a large field of view it can

detect a range of different types

of fire including hydrocarbon

and non-hydrocarbon sources.

Available in UV, UV/IR and 3IR we

have your application covered.

The FSL100 Series of flame detectors from Honeywell delivers robust, fast, and

reliable detection of flaming fires in a wide range of applications.

The range consists of UV, UV/IR and IR3 flame detectors.

All utilize sophisticated sensing and signal analysis to

detect fires quickly while also rejecting false alarms.

The FSL100 may be small and lightweight for

easy installation but it is designed to work in

tough indoor/outdoor environments, as well

as potentially explosive atmospheres.

With a large field of view it can

detect a range of different types

of fire including hydrocarbon

and non-hydrocarbon sources.

Available in UV, UV/IR and 3IR we

have your application covered.

• Suitable for indoor applications; for

example fume hoods and hydrogen

storage areas

• Effective solution for materials burning

with low temperatures, e.g. Sulphur

• Alarms to fires from heavy hydrocarbons (wood,

paper, petroleum, etc.), light hydrocarbons

(methanol, methane, etc.), and hydrogen

• Good resistance against the influences of:

– Direct and reflected sunlight

– Artificial light, such as fluorescent

tubes and glass covered halogen lamps