Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0
April 24, 2026 BY
IN ABB

ABB UNITROL 1005 Automatic voltage regulators (AVR)

Introduction

This document is a quick installation guide for the UNITROL1005 automatic

voltage regulator. Make sure that you read and understand this document

before you install or use the product. This document is meant only as a brief

guide to the product. For detailed information on the product, refer to the User 

Manual.

Device description

UNITROL 1005 is an automatic voltage regulator (AVR) for synchronous

machines up to 80MVA. The AVR can be used for the excitation of indirectly

excited synchronous machines and motors. The AVR can also operate as a

reactive power regulator, power factor regulator or field current regulator.

Installation procedure:

1. Refer to Dimensions for the mounting hole dimensions.

2. Make the appropriate holes in the installation plate.

3. Attach the AVR to the installation plate with suitable hardware, for example,

M6 screws to a torque of 10Nm. The mounting holes have a diameter of 6.5mm.

4. Make sure that there is a good electrical ground connection between the

installation plate and the AVR. The installation plate must be electrically grounded (PE).
April 24, 2026 BY
IN KEBA

Bently 3500/65 16-Channel Temperature Monitor

Description

The 3500/65 monitor provides 16 channels of temperature

monitoring and accepts both resistance temperature

detector (RTD) and isolated tip thermocouple (TC)

temperature inputs.  The monitor conditions these inputs and

compares them against user-programmable alarm

setpoints.

The monitor is programmed using the 3500 Rack

Configuration Software.  You can configure the 16-Channel

Temperature Monitor to accept isolated tip thermocouples,

3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs.

In Triple Modular Redundant (TMR) configurations, you must

install temperature monitors in groups of 3 adjacent

monitors. In this configuration the monitor uses 2 types of

voting to ensure accurate operation and to avoid single

point failures.

Specifications

Inputs

Power Consumption ：3 watts nominal

Signal ：Accepts from 1 to 16 RTD or isolated tip TC transducer signals.

Input Impedance ：Greater than 1 MΩ for each lead input.

Transducers

TCs

Type E：-100°C to +1000°C, (-148°F to +1832°F)

Type J： 0°C to +760 °C , (32°F to +1400  °F)

Type K：0°C to +1370°C , (32°F to +2498°F)

Type T：-160°C to +400°C, ( -256°F to +752°F)
April 24, 2026 BY
IN KEBA

KEBA Safety certified wireless technology SIL3 Cat4 PLe

Safety certified wireless technology SIL3 Cat4 PLe

The need for mobile HMIs has expanded even further into large

area robotics, production lines, and intralogistics. KEBA is the

first to have a solution with robust wireless safety technology,

testing, and certification.

//  Bluetooth 4.2 Technology for proximity or remote safety pairing

HMI to machine base stations

//  Safety devices when paired to base station are enabled with a

range of up to 20 meters

//  Non safety data is communicated over WiFi whether safety

pairing is active or not. For example, HMI software data.

//   High speed safety response times of less than 100ms

//   Multiple base stations and HMIs can operate on the same

network to ensure safe operations in local areas

//   Optional: Configurable operation area monitoring ensures

the operator stays in range and provides warnings if operator

moves outside the area before operations are stopped
April 24, 2026 BY
IN KEBA

KEBA Wireless Mobile IPC HMI with integrated safety

Wireless Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into

one device for simple and mobile operator control that

increases productivity and safety.

KeTop T150/155 Safe Wireless Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator‘s control of the

complete automation cell

//  Runs Windows 10 or HTML5 HMI software

//  Rugged IP65 rating, drop and vibration tested, globally trusted

HMI in the robotics industry

//  Projected Capacitive Multi Touch screen (PCT) for fast respon

se and gloved operation

//  Fast response membrane keypad with communication to PLC

or Robot for accurate control

//  E-Stop and safety enable provides safe operation with robots,

machine motion, and safety monitored areas
April 24, 2026 BY
IN KEBA

KEBA T150/155 Industrial Mobile IPC HMI with integrated safety

Industrial Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into one device

for simple and mobile operator control that increases productivity and safety.

KeTop T150/155 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator’s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally

trusted HMI in the robotics industry

//  Projected Capacitive Multi Touch screen (PCT) for fast

response and thin gloved operation

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas

Open software compatibility

Install any Windows or HTML5 HMI software to run on the

mobile HMI. Use with many popular global HMI software

programs. Linux OS available upon request.
April 24, 2026 BY
IN KEBA

KEBA KeTop T150/155 Mobile IPC HMIs

KeTop T150/155 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator’s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally

trusted HMI in the robotics industry

//  Projected Capacitive Multi Touch screen (PCT) for fast

response and thin gloved operation

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas
April 24, 2026 BY
IN KEBA

KEBA Wireless Mobile IPC HMI with integrated safety

Wireless Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into

one device for simple and mobile operator control that

increases productivity and safety.

KeTop T70 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator‘s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally trus

ted HMI in the robotics industry

// Analog resistive touch screen

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas

Open software compatibility

Install any Windows or HTML5 HMI software to run on the

mobile HMI. Use with many popular global HMI software

programs. Linux OS available upon request.
April 24, 2026 BY
IN KEBA

KEBA KeTop T70 Mobile IPC HMIs

KeTop T70 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator‘s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux optional

//  Rugged IP65 rating, drop and vibration tested, globally trus

ted HMI in the robotics industry

// Analog resistive touch screen

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas
April 24, 2026 BY
IN Reliance

Reliance PSC7000 Connection of. USB2.0 and Ethernet

Connection of. USB2.0 and Ethernet

Attain quick connection with the PC while programming and serv1c1ng the PSC7000 controller,

and shorten required time for downloading and uploading of the application programs.

Realize real-time observation for the internal states of the drives by means of oscilloscope functions

for high speed sampling when debugging the application programs of the PSC7000 controller.

Compactflash card

Use compact, large capacity compactflash cards capable of accessing at high speed in the PSC7000

controller as record media of the application programs.

Realiza to store failure information and production records at an application level.

Watch function

Keep. records of time when any failure happens in the system.
April 24, 2026 BY
IN Reliance

Reliance Features for PSC7000 Servo Controller

Features for PSC7000 Servo Controller

High speed synchronous communication between drives is attained with the SERCOS communication.

High speed operation at 150MFLOPS is attained by means of high speed DSP.

Multi-axis application

Applicable to high speed synchronous communication with the maximum 10 axes per one rack (in case of

PG input and analog output).

Applicable to high speed synchronous communication with the maximum 224 axes,

as 32 axes per one rack (in case of the SERCOS communication).

Applicable to various signal feedback control.

Realize high performance control systems using SERCOS communication, 

Synchlink communication, resolver.and high resolution encoders or the like as well as conventional PG

signal feedback control.

Applicable to various networks such as DCSnet, CC-Link, and DeviceNet.

Menu

Search for products

Back to Top
Product has been added to your cart