Integral air inlet

The integral air inlet (option) is available in two versions. It includes

– Microfilter and flow sensor module

– or microfilter, solenoid valve, pump, coarse filter, capillary tube and flow sensor module.

Electrical interface

Electrical interfaces for outputting measured values and communicating with external systems include Electrical interfaces for communicating with external systems include:

– Integrated Ethernet-10/100BASE-T interface (for service and configuration and configuration) Integrated Ethernet-10/100BASE-T interface dcs-sis.com (for service and configuration purposes) Functional range and ordering

– Analog output module with 2 analog outputs,

– Analog output module with 2 analog outputs, digital input/output module with 4 digital inputs and 4 digital outputs and

Digital input/output module with 4 digital inputs and 4 digital outputs and

– Modbus modules with RS485 and RS232 interfaces.

Housing design

The EL3020 Gas Analyzer is designed in a 19-inch housing with 3 height units and IP20 protection.

Description of Analyzer Performance Characteristics

The performance characteristics of the analyzers are defined according to the international standard IEC 1207-1:1994 “Performance statements for gas analyzers”.

They are based on N2 as a companion gas. When measuring other gas mixtures, compliance with these characteristics can only be ensured if their composition is known.

Measurement principle

Non-dispersive infrared absorption photometers in the λ = 2.5-8 µm wavelength range can measure up to 4 compositions using 1 or 2 beam paths and 1 or 2 receivers per beam path in one gas path or two independent gas paths.

Measure up to 4 components in one gas path or two independent gas paths with 1 or 2 receivers per beam path.

Impact Effects

Flow rate effects

Flow rates in the range of 20-100 liters/hour: within the detection range

Correlated gas effects/cross sensitivity

Analyzer configuration must be aware of sample gas composition.

Selective measures to reduce associated gas effects (optional): Installation of interference filters or filter units, internal electronic cross-sensitivity correction of one sample component by other sample components measured by the gas analyzer.

UNITROL® 1000 FLEX systems are pre-packaged solutions for applications requiring single or dual channel controllers. All systems come standard with the UNITROL® 1020 FULL, utilizing the best solution for the best price and flexible project adjustment limits.

After a quick transition to standard applications, the solution is gathering all the functionality required for excitation systems. The pre-packaged solution allows you to design the excitation system in the most flexible and cost-oriented way.

All versions are designed on a common mechanical basis with various IO and power mode options.

The system is available as a single- or dual-channel UNITROL 1020 FULL device.

By integrating the most complete product in ABB’s excitation portfolio, the standard system is ideally suited for integration into your control cabinet.

UNITROL 1020 FULL Features

All regulation types available: AVR/FCR/PF/VAR/Limiter

Automatic synchronization

MODBUS TCP communication

Rotating diode monitoring (RDM)

Reactive load distribution via RS48

Product Description

With the rapid transition to standard dcs-sis.com applications, this solution brings together all the functionality required for excitation systems. The pre-packaged solution allows you to design your excitation system in the most flexible and cost-effective way.

All versions are designed on a common mechanical basis and offer different input/output and power supply mode options.

The systems are available as single or dual channel UNITROL1020 FULL devices. By integrating the most complete range of products from ABB’s excitation portfolio, the standard system can be perfectly integrated into your control cabinet.

ABB APC03 series is a powerful and compact range of automatic capacitor banks that provide the ideal power factor correction solution for industrial and commercial applications. 

APC03 series is easy to install, operate and service while ensuring exceptional reliability, efficiency and safety. 

The key feature of APC03 series is the CLMD03 dcs-sis.com power module, the latest evolution of CLMD capacitor.

APC03 series improves the power factor in a wide variety of applications including:

 • Buildings

 • Mining

 • Steel industry

 • Chemical

 • Pulp and paper

 • Cement

 • Plastics

 • Printing

 • Food industry

Exceptional reliability and safety

Reliability and safety are key issues for capacitors. With CLMD capacitor, ABB provides the most reliable, durable and fail-safe dry capacitors on the market. It is the result of a state-of-the-art and unique protection technology.

CLMD03 Power Module and CLMD technology

CLMD03 power module is the latest evolution of CLMD capacitor. 

CLMD03 power module is all-in-one pre-wired power module, which includes capacitor – CLMD03 type, contactor, fuses and discharge resistors. CLMD03 power module provides all advantages of CLMD dry capacitor technology in a compact case,delivering high performance within a small footprint.

CLMD03 power module offers a number of exceptional properties such as: high voltage withstand capability, excellent peak current handling capacity, high capacitancestability, long life even under high electrical stress, very low losses and exceptional reliability 

and safety.

Total service approach

ABB offers a total service approach that goes well beyond supplying equipments. ABB is able to support customers through every step of their project, from identification of the needs till installation and commissioning of the equipment. ABB also offers a comprehensive equipment maintenance and repair service everywhere in the world.

Advanced design and precision manufacturing

 —robust, long-life probe for process temperatures up to 800 °C (1472 °F)

 —proven cell design from over 50 years experience

 —fast response to process variations

 —stable and accurate oxygen measurement

 Unique integrated auto-calibration system

 —easy compliance for emission monitoring regulation

 —reduced installation costs; eliminates requirement for expensive external calibration panel

 —reduced maintenance costs

 Probe lengths up to 4.0 m (13.1 ft.) and industry-standard flange configurations

 —suitable for a wide range of applications

 —extensive installation dcs-sis.com options

 Easy cell release

 —fully site-serviceable probe

 —easy access to internal components

 Advanced transmitters

 —easy configuration, monitoring and intuitive HMI

 —HART communications

 —cell performance logging and diagnostics

Introduction

The Endura AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.

Probe Lengths up to 4.0 m (13.1 ft.)

A wide range of probe insertion lengths from 0.5 to 4.0 m (1.7 to 13.1 ft.) enable installation to the optimum measuring point for accurate oxygen measurement within the duct; even in the largest flue gas ducts and stacks.

A comprehensive range of mounting flanges provide simple installation when plant-wide standard flanges are required or when replacing existing probes.

The transmitter can be probe- or remote-mounted at distances of up to 100 m (328 ft.), thus providing versatile system options for all applications. The probe-mounted transmitter option provides the lowest cost of installation. However, the remote-mounted transmitter provides flexibility when the operationally ideal probe location does not provide easy access for the user.

ABB High Voltage Induction Motors

ABB’s more than 130 years of motor manufacturing experience is the foundation of our industry-leading domain expertise.ABB high voltage induction motors combine the benefits of high reliability, availability and efficiency with customized design options to suit the most demanding industry sectors and applications. Our energy-efficient solutions enable industry to reduce its environmental impact.

ABB’s global support network makes maintenance easy throughout the product lifecycle, helping our customers optimize their cost of ownership. Proven product design and product testing ensure safe operation in the most demanding applications.

Modular motors

High voltage modular design dcs-sis.com motors offer the most reliable and optimized solution for the wide variability of most industrial applications in safe or explosive hazardous areas.

Power range: up to 23 mw

Voltage range: up to 13.8 kV

Shaft height: 355-1000 (mm)

Number of poles: 2-24

Cooling: IC01.IC31.IC611.IC616.IC666.IC81W, IC86W

Protection: IP23.IP24(W), IP55 to IP66 (Optional)

Operation: DOL, VSD

Operating environment: Safe area, Hazardous area

Core Applications.

Pumps, fans, blowers, compressors, conveyors, mills, propellers

Rib-cooled motors

ABB’s high voltage rib-cooled design motors set the benchmark for the industry, delivering more watts per kilogram than has previously been achieved with rib-cooled motors, which also allows for simple configurability and built-in maintainability.

Standards: IEC/NEMA

Power range: up to 2240 kW / 3000 HP

Voltage range: up to 11.5 kV

Shaft height: IEC 315-560/NEMA 5000-5800

Number of poles: 2-12

Cooling: IC411.IC416 / TEAC, TEFC

Protection: IP55. up to IP66

Operation: DOL, VSD

Operating environment: Safe area, Hazardous area

Core applications.

Pumps, fans, blowers, compressors, hoists, conveyors, extruders, mills, cutting, saws

Data

Oxygen only or oxygen plus combustibles

-Improved combustion efficiency

-Burner fault identification

-Enhanced plant safety

Tightly coupled sampling system

-Integrated flame arrestor

-Stabilized sample temperature and pressure

-Heated sample path

Comprehensive Diagnostics

-NAMUR-compliant diagnostic symbols

-Supports predictive maintenance

-Fully documented diagnostic events

Automatic sensor calibration

-Fully programmable schedules

-Local triggering

-Accuracy checking

Process logging and trending of all measurements

Calculated values

-Oxygen and carbon monoxide equivalent (COe)

-Process temperature measurement

-Combustion efficiency calculations

Multiple sample filters and back-purging options

-Optional dual filtration system

-Fully programmable blowback

Close Coupled Sampling System

The sensor assembly is mounted on the process wall and the probe and filter assembly extends into the process gas stream. A dcs-sis.com pneumatic injector is used to draw a sample from the process stream and feed it to the sensor head.

Oxygen analysis is performed by an industry standard zirconia cell.

Carefully metered dilution air is added and then calibrated for COe before the high sensitivity catalytic sensor is used to measure unburned combustibles.

The dilution air ensures a sufficient supply of oxygen to allow the COe sensor to function properly under abnormal process conditions where extremely low combustion oxygen levels may occur.

The tightly coupled extraction system enables tight temperature and pressure control of the sensor and sample gas.

This provides a stable background for target gas measurements, which improves the accuracy of the measurements.

Flame arrestors are installed in the sampling path to prevent flashbacks during startup when the combustible content of the process gas exceeds the Lower Explosive Limit (LEL), thus ensuring safe operation.

Flashback is prevented if the combustible content of the process gas exceeds the Lower Explosive Limit (LEL) during startup, shutdown, or process disturbances.

The sampling channel is kept hot to prevent acid gas condensation and corrosion.

Productivity

With the robot’s rugged mechanical design and motion control from the OmniCore controller V250XT, the IRB 5710 increases speed and accuracy, helping to improve productivity.

The IRB 5710 is faster than comparable robots and up to 25% faster than ABB’s large robots.

ABB’s larger robots (IRB 6700 and IRB 6620) are 25% faster, producing more product in less time.

With superior positional repeatability, path accuracy and path speed, the IRB 5710 is more precise than other robots, enabling the highest level of manufacturing quality.

LeanID integrated threading package dcs-sis.com increases uptime ABB’s unique LeanID integrated threading package integrates cabling within the robot body.

This reduces problems with swinging cables that can cause wear and tear, thus reducing downtime and maintenance costs.

LeanID can be more easily programmed and simulated in RobotStudio with predictable cable movement.

Flexible Production Layout

The IRB 5710 is available in a variety of mounting options, including floor, tilt, inverted, and semi-shelf, to maximize flexibility in production layout design.

The IRB 5710 offers more mounting options than any other robot.

Casting Protection

The robot also includes superior harsh environment protection, Foundry Plus, additional sealing protection against high levels of radiant or contact heat that

Ensuring higher availability, fewer failures and longer equipment life.

Optional protection devices protect the IRB 5710 from the harshest foundry environments.

Key Benefits

– TrueMove and QuickMove software for best-in-class motion control, shorter cycle times and improved path accuracy.

– Faster speeds and shorter cycle times – faster than other robots and up to 25% faster than the IRB 6620 and IRB 6700.

– LeanID Integrated DressPack reduces cable wear and extends maintenance intervals.

– Rugged structural design extends uptime.

– Multiple mounting options allow for flexible production layouts.

– Operates in harsh environments – Foundry Plus protection available.

Primary Applications

– Electric vehicle battery module pickup, placement and high-precision assembly.

– Automotive primary component material handling and machine operations.

– General industrial material handling, machine handling, die casting and general high precision applications.

Additional applications for process applications such as welding, cutting or dispensing will be released in 2023.