Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0
September 16, 2025 BY
IN Emerson

Emerson RSTi-EP Controllers Programmable Automation Controller

The demand for improved asset performance and

productivity is increasing in manufacturing and

infrastructure markets. They require even smaller

applications with robust execution performance

and a range of connectivity options to real-time

application status information and diagnostics.

Emerson has designed a small form factor,

high performance controller that enables

equipment builders to improve performance and

flexibility of their machines while reducing size,

complexity, and cost.

Advanced Security

Without proper cybersecurity in place, industrial controls

may be vulnerable to cyber threats. Emerson’s PAC, PLC

and industrial automation portfolio enlists defense-indepth

architecture to help secure assets from these threats.

RSTi-EP CPUs  incorporate technologies such as Trusted

Platform Modules and secure and trusted boot. Centralized

configuration allows encrypted firmware updates to be

executed from a secure central location. And, a suite of

cybersecurity technology and tools help prevent unauthorized

updates.
September 16, 2025 BY
IN ControlWave

ControlWave D301672X012 Micro Analog Output Modules Local or Remote Terminations

4 Isolated Analog Outputs Module

The 4 Isolated Analog Outputs module provides four analog

outputs that can be individually jumper configured for 4 to

20 mA or 1 to 5 Vdc isolated operation. Analog outputs are

electrically isolated from the CPU power system. Calibration

data for each channel is stored in an onboard EEPROM for

both current and voltage mode configurations. The 4

Isolated Analog Outputs module is available with local or

remote terminations.

Local or Remote Terminations

All analog I/O modules are available factory configured for

either local terminations that consist of two 10-point

terminal block assemblies or remote terminations that

consist of two 14-pin mass termination headers.

Terminations are pluggable and accept a maximum wire

size of 14 AWG (American Wire Gauge).

Remote terminations provide a convenient alternative to

the standard direct connect termination. Remote

terminations allow a concentration of electrical connections

from one or more controllers to be located in a single area,

such as the rear of a 19-inch cabinet. For more information

on remote terminations, refer to Product Date Sheet

CWMICRO.
September 16, 2025 BY
IN ControlWave

ControlWave D301672X012 8 Isolated High Common Mode

8 Isolated High Common Mode

(HCM) Analog Inputs Module

The 8 Isolated High Common Mode (HCM) Analog Inputs

module provides eight differential analog inputs. Analog

inputs are individually jumper configurable as internally

sourced 4 to 20 mA non-isolated operation or externally

sourced 4 to 20 mA, 1 to 5 Vdc, or 0 to 10 Vdc isolated

operation. The analog input circuitry is electrically isolated

from the bus interface circuitry of the ControlWave Micro.

The 8 Isolated HCM Analog Inputs module is available with

local or remote terminations.

6 Analog Inputs Module

The 6 Analog Inputs module provides six analog input

channels. Analog inputs are externally sourced, single

ended, and individually jumper configurable for either 4 to

20 mA or 1 to 5 Vdc operation. Surge suppression between

each signal and ground is achieved with 30 Vdc transorbs.

The 6 Analog Inputs module is available with local or remote

terminations.
September 16, 2025 BY
IN ControlWave

ControlWave D301672X012 Micro Analog Input Modules

The Analog Input (AI), Analog Output (AO), and Analog

Input/Output (AI/O) modules provide the ControlWave®

Micro with the ability to monitor and control various analog

field signals. The following AI, AO, and AI/O modules are

available.

6 Analog Inputs and 2 Analog Outputs module

6 Analog Inputs module

8 Isolated Analog Inputs module

4 Isolated Analog Outputs module

All I/O modules have surge protection that meets C37.90

1978 and IEC 801-5 specifications.

6 Analog Inputs and 2 Analog

Outputs Module

The 6 Analog Inputs and 2 Analog Outputs module provides

six analog inputs and two analog outputs. Analog inputs are

externally sourced, single-ended, and individually jumper

configurable for either 4 to 20 mA or 1 to 5 Vdc operation.

Analog outputs are externally sourced (11 to 30 Vdc) and

individually jumper configurable for 4 to 20 mA or 1 to 5

Vdc. Surge suppression between each signal and ground is

achieved with 30 Vdc transorbs. The 6 Analog Inputs and 2

Analog Outputs module is available with local or remote

terminations.
September 13, 2025 BY
IN ABB

NE810 ABB Ability™ System 800xA® hardware selector

NE810 is an Industrial switch made for harsh environments. Due to

our multi-rate SFP solution, the switch can be used in either 100

Mbit or Gigabit networks. Our unique FRNT (Fast Recovery of

Network Topology) technology is the fastest protocol on the

market to re-configure a network in case of any link or hardware

failure. That is why NE810 is also used in safety-critical applications

such as tunnels, traffic signal control, and railway systems.

Installations in harsh environments and places with heavy electrical

interference require the use of reliable media. NE810 provides a

number of solutions using fiber optic transceivers. Multi- or singlemode

transceivers can be used to build point-to-point or

redundant ring networks with ranges up to 120 km between each

switch. Our BIDI transceiver, which transmits and receives data on

a single fiber can be used in applications where the number of fiber

cores is limited.

Real-time properties are implemented in the switch in order to

achieve determinism for real-time critical applications. NE810

supports QoS (Quality of Service) with four priority queues and

strict priority scheduling as well as HoL (Head of Line Blocking

Prevention). All to assure that the data network is deterministic.
September 13, 2025 BY
IN ABB

NE810 ABB Ability™ System 800xA® hardware selector Features and benefits

Features and benefits

• Pre-configured for use with System 800xA

• NE810 supports redundant power connection

• Enhanced monitoring using PNSM

• Industrial Ethernet 10-port switch

• Long life duration

• Fully supported by ABB

NE810 is an Industrial switch made for harsh environments. Due to

our multi-rate SFP solution, the switch can be used in either 100

Mbit or Gigabit networks. Our unique FRNT (Fast Recovery of

Network Topology) technology is the fastest protocol on the

market to re-configure a network in case of any link or hardware

failure. That is why NE810 is also used in safety-critical applications

such as tunnels, traffic signal control, and railway systems.

Installations in harsh environments and places with heavy electrical

interference require the use of reliable media. NE810 provides a

number of solutions using fiber optic transceivers. Multi- or singlemode

transceivers can be used to build point-to-point or

redundant ring networks with ranges up to 120 km between each switch. 
September 13, 2025 BY
IN ABB

ABB NE802 System 800xA hardware selector

NE802 is an unmanaged 5-port switch with one SFP fibre port and

four copper ports, al supporting 10/100 Mbit/s or Gbit Ethernet. The

ABB range of Smal Form-factor Pluggable (SFP) transceivers are

available as multimode, singlemode or Bi-Di transceivers with

distance up to 120 km.

The unit is designed for use in industrial applications with dual 10 to

57 VDC power input. The unique “tri-galvanic” isolation provides

isolation between al ports, power supply and between each chassis

screen avoiding ground loop currents. The IP21 rating ensures that

the unit can be instaled in locations where condensed water may

occur. Only industrial grade components are used which gives the

units an MTBF of 1.182.000 hours and ensures a long service life. A

wide operating temperature range of –40 to +70 °C (–40 to +158 °F)

can be achieved with no moving parts.
September 13, 2025 BY
IN ABB

ABB NE802 System 800xA hardware selector Features and benefits

Features and benefits

• TX shields individualy isolated

• Wide DC power range 12 – 48 VDC

• Wide temperature range

• Automatic MDI/MDI-X crossover

• LED indicators for Power, Speed, Duplex, Link and Traffic

• Port monitoring

• 35 mm DIN rail mounting

• Enable or disable of flow control

NE802 is an unmanaged 5-port switch with one SFP fibre port and

four copper ports, al supporting 10/100 Mbit/s or Gbit Ethernet. The

ABB range of Smal Form-factor Pluggable (SFP) transceivers are

available as multimode, singlemode or Bi-Di transceivers with

distance up to 120 km.
September 13, 2025 BY
IN ABB

ABB NE810 3BSE080207R1 Network switch

NE810 is an Industrial switch made for harsh environments. Due to

our multi-rate SFP solution, the switch can be used in either 100

Mbit or Gigabit networks. Our unique FRNT (Fast Recovery of

Network Topology) technology is the fastest protocol on the

market to re-configure a network in case of any link or hardware

failure. That is why NE810 is also used in safety-critical applications

such as tunnels, traffic signal control, and railway systems.

Installations in harsh environments and places with heavy electrical

interference require the use of reliable media. NE810 provides a

number of solutions using fiber optic transceivers. Multi- or singlemode

transceivers can be used to build point-to-point or

redundant ring networks with ranges up to 120 km between each

switch. Our BIDI transceiver, which transmits and receives data on

a single fiber can be used in applications where the number of fiber

cores is limited.

Real-time properties are implemented in the switch in order to

achieve determinism for real-time critical applications. NE810

supports QoS (Quality of Service) with four priority queues and

strict priority scheduling as well as HoL (Head of Line Blocking

Prevention). All to assure that the data network is deterministic.

ABB PT805 3BSE080216R1 Single mode

ABB PT806 3BSE080227R1 Single mode,BiDi

ABB PT807 3BSE080228R1 Single mode,BiDi

ABB PT808 3BSE080217R1 Single mode

ABB PT809 3BSE080235R1 Single mode,BiDi

ABB PT810 3BSE080236R1 Single mode,BiDi

ABB PT811 3BSE080218R1 Single mode

ABB PT812 3BSE080233R1 Single mode,BiDi

ABB PT813 3BSE080234R1 Single mode.BiDi

ABB PT814 3BSE080232R1 RJ45 System 800xA hardware selector

ABB PT831 3BSE080222R1 Multi mode

ABB PT832 3BSE080225R1 Multi mode

ABB PT833 3BSE080219R1 Single mode

ABB PT834 3BSE080229R1 Single mode,BiDi

ABB PT835 3BSE080230R1 Single mode,BiDi
September 13, 2025 BY
IN A-B

A-B 4100-234-R Compact Motion Controller

Allen-Bradley’s 4100-234-R compact motion controller is a microprocessor-based motion controller

with 4-axis and remote I/O options, but no axle-link option.

It uses an Intel i960 microprocessor with a 16MHz processor speed and an efficient multitasking

operating system (up to 10 tasks at a time) that allows up to 2.000 user-valued processes to be

stored as 16-bit floating-point numbers in write-protected battery-supported volatile memory.

It has 10 years of battery life and data retention. The 4100-234-R uses an I/O input power supply

in the input voltage range of 90 to 132 volts AC (47 to 63 Hz), 3 amps of current, 

and 5 to 40 volts DC (nominal 24 volts), with a maximum current of 3 amps and coupling of 3 amps.

1/4 x 11/4 ratio slow fuse. Its remote I/O option allows smooth and easy communication

with the device via a remote I/O adapter.

The 4100-234-R also allows direct connection to a programmable logic controller (PLC) using

modules and discrete transmissions. It has four isolated configurable analog outputs with

a control resolution of 6 bits, 305 µV, an output range of ±10 V DC or ±150 mA,

and a maximum offset voltage output of ±80 mV at 220Ω voltage resistance.

The 4100-234-R, when combined with the flex I/O module, provides wider discrete I/O input and output capabilities.

The 4100-234-R can connect up to eight flex I/O modules, providing a total of 128 discrete I/O points.

These discrete modules provide up to 20 dedicated optical isolated discrete inputs and

8 optical isolated open relay discrete outputs for the 4100-234-R.

The 4100-234-R uses GML for programming and RS-232C for file transfer.

Menu

Search for products

Back to Top
Product has been added to your cart