At a Glance

Laser line extraction with zero host CPU usage

Real-time generation of 16-bit 3D height maps

Choice of algorithms: Maximum, Peak, Center of Gravity (COG)

Precision: up to 1/256 pixel (with Peak and COG algorithms)

Performance: 19.000 profiles/s from 1024 x 128 images. 38.000 profiles/s from

1024 x 64 images

Benefits

Laser line extraction with zero host CPU usage

The Coaxlink’s on-board FPGA measures the position of the laser line during the image acquisition without loading the

host CPU.

Real-time generation of 16-bit 3D height maps

The Coaxlink directly transfers the computed 3D height map to the host PC memory without delay, in real-time.

Acquire images from the fastest and highest resolution cameras

Highest data acquisition rate in the industry

25 Gbit/s (2.500 MB/s) bandwidth from camera to host PC memory

 Applications

 Machine Vision for the Electronic Manufacturing Industry

 • High speed image acquisition for AOI, 3D SPI, 3D lead/ball inspection machines.

 • Very high resolution line-scan image acquisition for Flat Panel Display inspection and solar cell

inspection

 Machine Vision for the General Manufacturing Industries

 • High frame rate image acquisition for inspection machines

 • Line-scan image acquisition for surface inspection machines

 • Line-scan image acquisition for textile inspection

• Image acquisition for robots

 Machine Vision for the Printing Industry

 • High speed line-scan image acquisition for printing inspection machines

 Video Acquisition and Recording

 • High-frame-rate video acquisition for motion analysis and recording

 Flexible line-scan camera operation with the rate converter

 • The rate converter is a smart, programmable frequency multiplier/divider.

 • Used with motion encoders and line-scan cameras, it allows the user to choose the aspect ratio of the

pixels in the image.

 • It provides a way to calibrate the acquisition chain to easily reach square (1:1 aspect ratio) pixels.

 C2C-Link camera synchronization

 Allows to accurately synchronize multiple area-scan or line-scan cameras connected

 • to the same card

 • to different cards in the same PC

 • to different cards in different PCs

 Compatible with eGrabber

 • eGrabber Studio: eGrabber’s new interactive evaluation and demonstration application 

• GenICam Browser: An application giving access to the GenICam features exposed by the GenTL

Producer(s)

 • GenTL Console: A command-line tool giving access to the functions and commands exposed by the

Euresys GenTL Producer

 Compliant with GenICam 

Including support for

 • GenApi

 • The Standard Feature Naming Convention (SFNC)

 • GenTL

 Windows, Linux and macOS drivers available

 • Including support for Intel 64-bit platforms as well as ARM 64-bit platforms

Line-scan triggering capabilities 2/2

 • The Coaxlink frame grabber controls the camera scanning rate based on the signals received from a

motion encoder. When the 

parts move faster, the acquisition line rate of the camera increases. When the parts move slower, the

acquisition line rate of the camera decreases.

 • The Coaxlink boards interpret A/B signals from quadrature motion encoders to know in which direction

(forward or backward) the part is moving.

 • Optionally, the Coaxlink board can be instructed to acquire lines only when the object is moving

forward or only when the object is moving backward.

 • A feature called Backward Motion Cancellation stops the acquisition when a backward motion is

detected. The line acquisition 

automatically resumes when the motion is again in the forward direction, at the exact place where the

acquisition was interrupted.

 • A Rate Converter allows the camera to acquire lines at any programmable resolution lower or higher

than the resolution of the motion encoder. This gives the designer incredible freedom and flexibility

during the development of the application.

 • A Rate Divider allows the camera to acquire lines at a resolution lower than the resolution of the

motion encoder. It divides the frequency of the incoming encoder signal by a programmable integer.

 Line-scan triggering capabilities 1/2

 Coaxlink supports continuous web scanning (to inspect infinite, continuously moving surfaces without

losing a single line) 

and discrete object scanning (to acquire the image of objects moving in front of the camera).

 • A trigger is used to start the acquisition when the part is in position. Hardware triggers come from the

board’s I/O lines. 

Software triggers come from the application.

 • After it is started, the acquisition either:– Continues indefinitely (for web inspection applications)

– Continues for a programmable number of lines (to acquire the image of objects of a known length)

– Continues until an end trigger is received (to acquire the image of objects of a variable length)

 • An optional trigger delay is available to postpone the beginning of the acquisition for a programmable

number of lines.

Direct GPU transfer

 • Sample programs for AMD DirectGMA and NVIDIA (CUDA) available.

 • Direct GPU transfer eliminates unnecessary system memory copies, lowers CPU overhead, and reduces

latency, resulting in 

significant performance improvements in data transfer times for applications.

 • Direct capture of image data to GPU memory is available using AMD’s DirectGMA. Compatible with

AMD FirePro W5x00 and 

above and all AMD FirePro S series products.

 General purpose I/O lines

 • Compatible with a wide range of sensors and motion encoders.

 • High-speed differential inputs: Quadrature motion encoder support up to 5 MHz.

 • Isolated current-sense inputs: 5V, 12V, 24V signaling voltages accepted, up to 50 kHz, individual

galvanic isolation up to 

250VDC and 170VAC RMS.

 • Isolated contact outputs.

 • High-speed 5V-compliant TTL inputs/ LVTTL outputs.

 High-performance DMA (Direct Memory Access)

 • Direct transfer into user-allocated memory and hardware boards that expose PCI addresses

 • Hardware scatter-gather support

 • 64-bit addressing capability

 Area-scan triggering capabilities

 • A trigger is used to start the acquisition when the part is in position. Hardware triggers come from the

Coaxlink’s I/O lines. 

Software triggers come from the application.

 • An optional trigger delay is available to postpone the acquisition for a programmable time.

 • A trigger decimation function allows to skip some of the triggers.

 • Camera exposure control allows the application to control the exposure time of the camera.

 • When the acquisition starts, at the appropriate timing, the Coaxlink board generates a signal to control

an illumination device connected to one of its output lines.

 Acquire images from the fastest and highest resolution cameras

 •Highest data acquisition rate in the industry

 •50 Gbit/s (5,000 MB/s) bandwidth from camera to host PC memory

 Power over CoaXPress

 •Power over CoaXPress : Feed your camera up to 17 W per channel under 24 VDC with automatic device detection, 

measurement and overload protection.

 •Total and per-channel voltage and current measurement is possible, allowing validation and performance deviation monitoring.

 Long cable support

 •40 meters at CXP-12 speed (12.5 Gbps) 

•72 meters at CXP-6 speed (6.25 Gbps) 

•100 meters at CXP-3 speed (3 Gbps)

 Use standard coaxial cables

 •A single inexpensive cable for data transfer, camera control, trigger and power supply

 •Top reliability and flexibility, performs in the harshest environments

 Micro-BNC (HD-BNC™) connectors for reliable connection

 • Trusted push and turn, bayonet-style positive lock

 • Allows for quick and easy connects and disconnects

 Memento Event Logging Tool

 • Memento is an advanced development and debugging tool available for Coaxlink and Grablink cards.

 • Memento records an accurate log of all the events related to the camera, the frame grabber and its driver as well as the application.

 • It provides the developer with a precise timeline of time-stamped events, along with context information and logic analyzer view.

 • It provides valuable assistance during application development and debugging, as well as during machine operation.

At a Glance

 •Four CoaXPress CXP-12 connections and four Data Forwarding outputs: 5,000 MB/s camera bandwidth

 •PCIe 3.0 (Gen 3) x8 bus: 6,700 MB/s bus bandwidth

 •Feature-rich set of 10 digital I/O lines

 •Extensive camera control functions

 •Memento Event Logging Tool

Benefits

 CoaXPress Data Forwarding 

•Allows to distribute the image processing workload among several host PCs

 PCIe 3.0 (Gen 3) x8 bus

 •7,800 MB/s peak bus bandwidth

 •6,700 MB/s sustained bus bandwidth

 Acquire images from the fastest and highest resolution cameras

 •Highest data acquisition rate in the industry

 •50 Gbit/s (5,000 MB/s) bandwidth from camera to host PC memory

 Power over CoaXPress

 •Power over CoaXPress : Feed your camera up to 17 W per channel under 24 VDC with automatic device

detection, measurement and overload protection.

 •Total and per-channel voltage and current measurement is possible, allowing validation and

performance deviation monitoring.

 Long cable support

 •40 meters at CXP-12 speed (12.5 Gbps) 

•72 meters at CXP-6 speed (6.25 Gbps) 

•100 meters at CXP-3 speed (3 Gbps)

Genicam compliant

Includes support for

– GenApi

– Standard Functional Naming Convention (SFNC)

– GenTL

Windows, Linux and macOS drivers available

– Support for Intel 64-bit platforms as well as ARM 64-bit platforms

Applications

Machine vision for electronics manufacturing

– High-speed image acquisition for AOI, 3D SPI, 3D lead/ball inspection machines.

– Very high resolution line scan image acquisition for flat panel display inspection and solar cell inspection

– Marker inspection

Machine vision for general manufacturing

– High frame rate image acquisition for inspection machines

– Line scan image acquisition for surface inspection machines

– Line scan image acquisition for textile inspection

– Robotic image acquisition

Machine vision for the printing industry

– High Speed Line Scan Image Acquisition for Print Inspection Machines

Video Capture and Recording

– High frame rate video capture for motion analysis and recording

Video Surveillance, Monitoring and Security

– Transmission and capture of HD video over long distance coaxial cables for traffic monitoring,

surveillance and control