Category: Parker

Customer Value

Advantage:

Most vehicles equipped with hydraulic valves benefit from smooth proportional control.

Electro-hydraulic controllers provide precise, repeatable and adjustable functions for any machine.

This helps ensure operator productivity and equipment profitability.

Parker electronic controllers have extensive product and system expertise to

provide solutions that scale machine functions, provide ergonomic fingertip control for the operator, and help extend the life of the machine.

Products and Features:

– Input Devices

– Joysticks

– Displays

– Motion Controller

– CAN bus and analogue signals

– Real-time calculations

– Fine control capability

Electrohydraulic operation

Hydraulic pilot spool with coil Proportional electrohydraulic control is usually generated by a controller or electronic actuator.

The controller or electronic actuator regulates the current supplied to the valve’s solenoid coil based on a reference signal from an input device.

The current produces a magnetic field that moves the armature, which in turn moves the hydraulic spool or spool of the pilot section, or in some cases acts directly on the spool.

The coils all have resistance, which usually varies with temperature. For good electro-hydraulic control, it is necessary to be able to regulate the current to accommodate temperature/resistance variations.

In addition, manufacturing and design differences in coils and hydraulic valves can cause performance to vary from valve to valve, even if they are of the same type.

Optimal electro-hydraulic control requires the ability to manage and adjust all parameters that may affect coil current and valve flow or pressure.

Parker ECD offers a wide range of controllers and displays to build state-of-the-art electrohydraulic control systems.

Electrohydraulic (EH) control is the effective proportional control of hydraulics through the use of solenoid coils.

EH control is the effective proportional dcs-sis.com control of hydraulics through the use of electromagnetic coils.

Good EH control should be

– Accurate and smooth

– Repeatable

– Adjustable

An electric current is passed through the coil to create hydraulic pressure. The current generates a magnetic force that moves the spool or armature.

– Coil has resistance

– Voltage is used to push current through resistance

– Resistance varies with temperature

The C3S063V2 stand-alone servo drive is rated at 2.5 kVA.

With scalable technical features – from intelligent IEC 61131 drives with electronic cam and PLCOpen function modules to basic analogue torque/speed/position control.

The Parker C3S063V2F12I31T11M00 Compax3S is part of Parker Hannifin’s new servo drive range.

This model of servo drive offers a range of features and benefits that make it an excellent performer in a number of applications.

Firstly, the Compax3S servo drive has a modular construction design, which not only reduces initial set-up costs, but also optimises the performance of the application.

The modular design makes the servo drive easier to dcs-sis.com install and maintain, and also improves the reliability and stability of the equipment.

Secondly, Compax3S servo drives are compatible with a wide range of safety standards, such as “Safe Stop”.

This means that there is no need to develop and test customer-specific safety programmes, as the drive already incorporates certified safety standards.

This greatly simplifies the process for the user and increases the safety of the device.

In addition, the Compax3S servo drive complies with a number of international standards such as CE, UL and cUL, which ensures the quality and safety of the equipment.

Avoiding problems that may arise during acceptance tests. Compliance with these standards also proves the drive’s global applicability and reliability.

In terms of space, the Compax3S servo drives have a compact design. In modern industrial production, space is often a very valuable resource.

The compact design therefore not only saves space, but also increases productivity.

Finally, Compax3S servo drives offer solutions for a wide range of applications worldwide through a streamlined model range.

This reduces inventory requirements and simplifies the ordering process, making it easier for users to select and use the right servo drive for their needs.

In summary, the Parker C3S063V2F12I31T11M00 Compax3S servo drive features a modular design, compatibility with multiple safety standards,

compliance with a number of international standards, compact structure, and wide applicability, and other features and advantages.

These characteristics make it have a wide range of applications in industrial automation, machinery manufacturing and other fields.

Customer Value

Advantage:

Most vehicles equipped with hydraulic valves benefit from smooth proportional control.

Electro-hydraulic controllers provide precise, repeatable and adjustable functions for any machine.

This helps ensure operator productivity and equipment profitability.

Parker electronic controllers have extensive product and system expertise to

provide solutions that scale machine functions, provide ergonomic fingertip control for the operator, and help extend the life of the machine.

Products and Features:

– Input Devices

– Joysticks

– Displays

– Motion Controller

– CAN bus and analogue signals

– Real-time calculations

– Fine control capability

Electrohydraulic operation

Hydraulic pilot spool with coil Proportional electrohydraulic control is usually generated by a controller or electronic actuator.

The controller or electronic actuator regulates the current supplied to the valve’s solenoid coil based on a reference signal from an input device.

The current produces a magnetic field that moves the dcs-sis.com armature, which in turn moves the hydraulic spool or spool of the pilot section, or in some cases acts directly on the spool.

The coils all have resistance, which usually varies with temperature. For good electro-hydraulic control, it is necessary to be able to regulate the current to accommodate temperature/resistance variations.

In addition, manufacturing and design differences in coils and hydraulic valves can cause performance to vary from valve to valve, even if they are of the same type.

Optimal electro-hydraulic control requires the ability to manage and adjust all parameters that may affect coil current and valve flow or pressure.

Parker ECD offers a wide range of controllers and displays to build state-of-the-art electrohydraulic control systems.

Electrohydraulic (EH) control is the effective proportional control of hydraulics through the use of solenoid coils.

EH control is the effective proportional control of hydraulics through the use of electromagnetic coils.

Compact, Intelligent and Powerful Industrial Servo Drives and Drive/Controllers

With its high performance and modular design, the Compax3 series of industrial servo drives and actuators/controllers takes servo performance and flexibility to a new level.

The modular structure of the Compax3 series allows users to choose options such as intelligent motion controllers, fieldbus interfaces and industry standard motor feedback.

In addition, a number of expansion options can be added to the standard products to optimise the functionality required for today’s demanding servo applications.

Compax3 Features

– Available in 120/240 VAC and 480 VAC input versions

– Integrated safety: EN954-1 Class 3 technology

– Continuous current outputs from 2.5 A (RMS) to 155 A (RMS)

– Transformer, encoder, high resolution SinCos® or Stegmann absolute rotary encoder feedback (single or multi-turn) or Heidenhain Endat 2.1

– Internal regenerative circuit; external resistor connection dcs-sis.com for additional power dissipation

– Easy-to-use wizard-based configuration and programming via C3 ServoManager™ software package

– Standard C3 ServoManager™ software provides comprehensive diagnostic, adjustment and 4-channel oscilloscope tools

– Software input analogue

– Automatic load recognition (auto-tuning)

– CE (EMC and LVD), UL and cUL certified

Parkrimp Modular Crimper

The same unit is now portable and bench-mountable!

Modular design with the familiar Parkrimp system

advantages:

Parker Hose Products Division introduces two new Parkrimp Modular Crimpers – the Karrykrimp and Karrykrimp 2.

The new modular design allows customers to choose the portability that Parker Karrykrimp crimps have always offered, as well as a new option to make these crimps bench-top units.

The modular design provides users with dcs-sis.com the flexibility of a portable crimper, with the added benefit of increased productivity when connected to a stationary power unit.

Product Features

– Individual crimping units can be portable or bench mounted

– Shorter cycle times for bench-mounted units

– Increased height allows for crimping of longer bent fittings

– Cylinder maintenance now available for Karrykrimp 2

Parker’s Parkrimp® system has always led the industry in ease of use, accuracy and effectiveness.

The Parkrimp system is designed to crimp fittings to the correct diameter every time.

This means fluid power professionals won’t waste valuable time fiddling with variable settings that could produce an incorrect crimp.

The Parkrimp System crimper requires no calibration, produces an accurate crimp the first time it is used, and consistently produces the correct crimp time after time.

Parker’s Parkrimp System offers several advantages to the user:

– Perfect Alignment: Parker’s exclusive Parkalign™ system features a positive stop design that positions the joint in the die for a perfect crimp every time.

Parkalign allows the operator to “feel” that the hose is in the correct crimp position instead of “visually” checking the correct position of the fitting in a variable crimping machine.

– Efficient Design: The bottom-loading Parkrimp crimper makes it easier for operators to manage long hose assemblies.

– Linked dies: Parkrimp crimp dies are linked together to prevent misalignment or mismatch of segments.

– Colour coded dies: Parkrimp dies are colour coded by size for easy identification and reduced set-up time.

– Durability: Since its introduction in 1980. Parkrimp crimpers have been designed and manufactured to provide years of reliable service.

– Decals: Parkrimp crimpers come with informative decals that provide a list of the correct hose and fitting combinations, the tools required, and the crimp specifications for each hose and fitting combination.

These bench-top units are designed to produce approximately 200 hose assemblies (400 crimps) per day.

Despite the faster cycle times, they are not designed to produce crimps. Exceeding these recommended production volumes will significantly reduce the life expectancy of all crimper components.

Flexible and efficient power unit for maximum productivity in hose crimping

Maximise productivity and flexibility

The Parker 85CE-PDP Crimping Power Unit provides an efficient and flexible way to crimp hoses anywhere.

No local power or air supply is required as it can be operated with any commercially available screwdriver.

Used in conjunction with Parker crimpers Karrykrimp and Karrykrimp 2. the power unit is designed for use in agriculture, construction, and forestry.

efficiently fabricate hose assemblies for agriculture, dcs-sis.com construction, forestry and other mobile hydraulic applications.

The Crimp Power Unit 85CE-PDP is a perfect fit for 700 bar hose.

Includes male connector and handle (item no. 82CE01C9L-K-1500).

Advantages

– Operation with any commercially available cordless screwdriver (not included) (min. torque 25Nm; max. 2850 rpm)

– Built-in pressure test point

– Comfortable shoulder strap for easy carrying of tools

Product Features

– Two-stage pump; flows up to 3.2 (0.8) litres/minute

– Rated pressure 70 MPa (700 bar)

– Pressure relief valve preset to 700 bar (manually adjustable)

– Hexagonal SW13 mm drive shaft (socket not included)

– Temperature range 10°C to +35°C

– Oil capacity 2.5 litres (without oil)

– Weight 8.5 kg (incl. oil)

– L x W x H (mm) 245 x 170 x 220

Digital Servo Drive/Controllers

The COMPAX servo drive/controller family is the highpowered cousin to Compumotor’s line of Gemini low- to midpower servo drive/controllers. Providing an ideal solution for motion control systems where 120VAC – 460VAC direct input power is used, the COMPAX family provides up to 35kW continuous/70kW peak drive power for those more demanding high-speed, high-inertia, high-load applications. The COMPAX family is flexible, offering the choice of either standalone or modular packages for single- or multi-axis needs, thereby providing a complete motion dcs-sis.com control solution in a highly reliable and integrated package.

All COMPAX units incorporate the easy-to-use Servo ManagerTM front-end software package – a user-friendly,parameter-based configurator that greatly simplifies setup and programming for software users of any level.

The COMPAX can communicate via ASCII and binary or via a number of supported fieldbus protocols for direct interface with PCs, HMIs and PLCs. Moreover, any standard COMPAX unit can be upgraded with specialized functionality and/or alternative feedback devices, allowing users to tailor the COMPAX to their specific application needs.

This combination of performance, flexibility and expandability makes the COMPAX a powerful and valuable member of the Compumotor servo product family.

Features

Performance

• Eight power ranges available, providing up to 35kW of continuous drive power

• Direct online single or 3-phase power input (120VAC to 460VAC)*

• Continuous current levels from 2.5 Amps to 50 Amps (RMS); peak current from 5 Amps to 100 Amps (RMS)

• Digital control of position, velocity and torque (current) loops

• High-speed DSP

– 100 microsecond servo update rate

– 1 millisecond command processing rate

COMPAX Family Features

• Standalone servo controller and drive in one integrated package

• Control features such as registration, motion profiles, Scurve velocity profiles,conditional statements, arithmetic functions and resolver feedback all standard

• Specialized functions such as following, cam profiling, electronic gearing or cut-on-the-fly available as options for all COMPAX products

• Available in standalone or modular configuration for singleor multi-axis applications

• Serial, binary and fieldbus communication

• PLC-handshaking via onboard I/O

• Comprehensive program monitoring, status and diagnostic features

• Error log—records and stores the four most recent errors

• Easy parameter-based drive setup and motor configuration via the included Servo Manager™ software package

• Guided motor setup and tuning via software tools

• Non-volatile memory for reliable storage of parameters and programs

• Simple, BASIC-style programming language

• Floating point, integer and binary variables with high-level math functionality

• Position or velocity control via external encoder pulse, step/direction† or ±10VDC analog signal†

• Fully CE compliant (EMC & LVD)

Protection

• Short-circuit protection—phase-to-phase and phase-toground

• Over-voltage protection for both drive and controller sections

• Under-voltage (brownout) protection for both drive and controller sections

• Drive over-temperature protection

• Motor over-temperature protection

• Current foldback protection

• Regeneration protection

Features

Performance

• Eight power ranges available, providing up to 35kW of continuous drive power

• Direct online single or 3-phase power input (120VAC to 460VAC)*

• Continuous current levels from 2.5 Amps to 50 Amps (RMS); peak current from 5 Amps to 100 Amps (RMS)

• Digital control of position, velocity and torque (current) loops

• High-speed DSP

– 100 microsecond servo update rate

– 1 millisecond command processing rate

COMPAX Family Features

• Standalone servo controller and drive in one integrated package

• Control features such as registration, motion profiles, Scurve velocity profiles,conditional statements, arithmetic functions and resolver feedback all standard

• Specialized functions such as following, cam profiling, electronic gearing or cut-on-the-fly available as options for all COMPAX products

• Available in standalone or modular configuration for singleor multi-axis applications

• Serial, binary and fieldbus communication

• PLC-handshaking via onboard I/O

• Comprehensive program monitoring, status and diagnostic features

• Error log—records and stores the four most recent errors

• Easy parameter-based drive setup and motor configuration via the included Servo Manager™ software package

• Guided motor setup and tuning via software tools

• Non-volatile memory for reliable storage of parameters and programs

• Simple, BASIC-style programming language

• Floating point, integer and binary variables with high-level math functionality

• Position or velocity control via external encoder pulse, step/direction† or ±10VDC analog signal†

• Fully CE compliant (EMC & LVD)

Protection

• Short-circuit protection—phase-to-phase and phase-toground

• Over-voltage protection for both drive and controller sections

• Under-voltage (brownout) protection for both dcs-sis.com drive and controller sections

• Drive over-temperature protection

• Motor over-temperature protection

• Current foldback protection

• Regeneration protection

Physical

• Compatible with a wide selection of brushless servo motors, such as the Compumotor SM, BE, NeoMetric, J and M Series motors

• Supports linear servo motors, such as the Daedal LXR and Compumotor SL motor series

• 3-digit LED display* for monitoring diagnostic status and/or errors related to the following:

– Controller section

– Amplifier drive section

– Fieldbus

• Bus power and 24VDC control power status light

• Built-in regeneration (power dissipation) circuitry on all units; optional external modules available for additional power dissipation capability

New Series Member for COMPAX Digital Servo Controllers

The existing COMPAX series (capacity range 2.5 kVA to 35 kVA) is now joined by a unit with a capacity of 1 kVA – the COMPAX 1000SL.

Independent electronically controlled drives create flexibility ……

In the classic solution of multiple operations from a central axis via dcs-sis.com mechanical components, the need for more flexible and cost-effective machines is becoming increasingly difficult to meet. Electronic servo controls provide a decentralised solution to this problem and replace rigid mechanical components such as gears, shafts and cams with separate servo controls

Electronic control drives increase functional capability.

COMPAX 1000SL Features

Power supply 230V AC single phase, control voltage 24V DC

Synchronous motor speed up to 9000 rpm

Motor brake control

External ballast resistor

8 digital inputs/outputs each

Analogue override inputs

Rotary Transformer/High Resolution Sensor

RS 232 interface

Step/direction inputs

Encoder interface

HEDA real-time bus

Fieldbus interface (optional)

RS 485 interface

Profibus

CAN bus

CANopen (English: CANopen)

Interbus-S type

CS31 Series

Software variant:

Standard

Rotary table control

Electronic drive

Cam control

Extended low-power range

Working with the five principles of Flexibility, Simplicity, Reliability, Connectivity and Capability our engineers have created a product focussed on making the benefits of quality motor control available to every business.

Parker provides easy to use software tools for all levels of experience; enabling users to address any application. Simple applications can be setup in seconds and more complex applications can be configured in the simplest and most logical way.

Programming can be via the keypad, DSELite, Parker Drive QuickTool software or the Codysys based Parker Developer with full IEC 61131 PLC Functionality.

The AC30 provides users with access to a large library of application macros and worked examples. While users are free to develop their own applications, they can also save time and development cost by accessing and customising  examples of completed solutions.

To enable connectivity into a wide range of automation systems the AC30 features Profinet and Ethernet IP through dual Ethernet ports, as well as Modbus TCP IP with client and server functionality.

That makes the AC30 series compatible with more than 80 percent of automation architecture; there is no need for expensive add-ons or upgrade modules.

The Ethernet protocols also provide potential for intelligent data analytics and connection to external servers – opening up links to the cloud or big data

functionality.

So whether for standalone use or for integration into a complex automation system, the AC30 offers an easy to use solution for both simple and advanced motor control applications.