Category: DEIF

OVERVIEW

The SGC 410 controller is a modern island genset controller with a user-friendly HMI and full graphic LCD.

It includes voltage and frequency measurement of the genset as well as electrical load measurement (True RMS).

Configurable analog and digital inputs/outputs are provided for various functions.

Remote communication is available via RS-485 Modbus and CAN ports.

The genset can be started and stopped remotely using the remote start/stop function.

Deep sleep mode is a useful feature that extends battery life by suspending the normal function of the controller when the genset is shut down.

Monitor engine safety, electrical load, on-site standby battery voltage, and shelter temperature (to reduce fuel consumption).

Configure parameters from a PC using the DEIF Smart Connect utility software. Connects to the PC via the controller’s USB Type B port.

Environmental

– Vibration: 2 G in X, Y, and Z axes per IEC 60068-2-6

– Shock: 15 g, 11 ms per IEC 60068-2-27

– Humidity: 0 to 95 % RH per IEC 60068-2-78

– Enclosure rating Front gasketed IP65 per IEC 60529

– EMI/EMC: IEC 61000-6-2. 4

Approvals

– CE marking:

Complies with the EU Low Voltage Directive: EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 1: General requirements.

Compliance with EU EMC Directive EN 61000-6-2. 4

The SGC 110 is a modern genset controller with a user-friendly HMI and full graphic LCD.

The controller comes with powerful software. A wide range of inputs and outputs support a variety of industry-standard functions in diesel/gasoline genset applications.

The DEIF Smart Connect software provides the flexibility to configure each individual input and output for a specific function or application.

All parameters can also be configured on the controller.

Key features

– Genset controller with configurable inputs:

Five digital inputs

Three analog inputs

– Six digital outputs

– Effective monitoring of genset performance

– Precise monitoring of genset output voltage and frequency

– Remote start/stop

– Deep sleep mode for extended battery life

– Preheat output to assist engine start

– Connects to PC via USB port for customized configuration

– Full graphic backlit display with power saving features

– Records the latest 30 events

The accuracy class is 0.5 for analog data and 0.3 for Modbus data.

With configurable outputs for more than 50 parameters and a universal power supply (19-300V DC, 40-276V AC).

DEIF’s sensors can be installed and reconfigured in the future to meet the needs of virtually any application.

DEIF’s MTR-3 is a cost-effective, compact and powerful solution for sensor applications.

It has been developed for measuring single-phase and three-phase network topologies and provides measurement data via RS485 Modbus communication.

Up to four analog outputs can be configured quickly and easily by simply connecting a USB 2.0 interface. Up to four analog outputs.

MTR-3 Features

Suitable for all single-phase and three-phase network topologies

Up to 1000 VL-L AC input

Accuracy class 0.5 or 0.3

Up to 4 analog outputs

Fast response time, minimum ≤ 50 ms

Measurement of more than 50 parameters

RS485 serial Modbus communication

Fully configurable via USB, no auxiliary power required

19 to 300 V DC/40 to 276 V AC universal power supply