Category: Bachmann

Plants extended over large distances, interference fields

caused by power engineering systems, difficult grounding

conditions or aggressive substances close to the measure

ment sensors the challenges in analog measurement tech

nology for industrial applications can be manifold.

Floating measurement circuits with differential circuits

must be planned in order to exclude interference from

the measurement chain as much as possible. To prevent

interference and damage from being transmitted from one

sensor circuit to all the others, the measuring and control

circuits are galvanically isolated from each other.

For this purpose, the AIO104/I module type offers the ben

efits of an extremely versatile multi-signal analog input/

output module combined with channel-wise galvanic isola

tion. Each of the 4 primary channels can be operated indi

vidually either as an analog input or output. The spectrum

of the inputs ranges from current loops (4 mA to 20 mA,

±20 mA) to 4 high-impedance voltage measurement ranges

(±10 V to ±10 mV), Pt100/Pt1000 temperature measure

ment in 2-wire, 3-wire, and 4-wire connection technology as

well as thermocouples, and through to freely configurable

resistance measurement. The integrated measuring range

and measured value monitoring enable both sensor circuit

faults as well as process alarms to be implemented easily.

Current loops can also be driven or 0 V to 10 V, ±10 V

voltage signals can be output in 14 bits. Besides the 4 freely

configurable primary channels, up to 4 additional I/O chan

nels with restricted signal types are available.

The cost and performance optimized design of complex

automation solutions involves a large number of different

sensor and actuator types. The standard 10 V and 4 mA

to 20 mA interfaces are often not sufficient to achieve

demanding objectives.

With the UIO108. a single module type covers all common

analog and digital signals for inputs and outputs that can

be configured individually for each channel. The extensive

versatility of the module is rounded off by a wide range

of additional functions such as counters, encoders, pulse

width modulation and the control of a stepper motor

driver. This simplifies the entire process from the quotation

phase through planning, programming and commissioning,

right up to stockkeeping and servicing. Besides the 8 freely

configurable primary channels, up to 8 additional I/O chan

nels with restricted signal types are available.

Features

● 4-channel analog input/output module isolated

● Up to 4 additional analog channels depending on the

required signal type

● Configurable by channel: signal type and direction

● AI current/voltage, Pt100. Pt1000. thermocouples (J, K, T,

N, E, R, S, B)

● AO current/voltage

● Channel-wise galvanic isolation

● Oversampling

● Synchronous clocks

Features

● 8-channel analog/digital input/output module

● Up to 8 additional channels depending on the required

signal type

● Configurable by channel: signal type and direction

● DI / counter / encoder

● DO / PWM

● AI current/voltage, Pt100. Pt1000. thermocouples (J, K, T, N, E, R, S, B)

● AO current/voltage

● Control of a stepper motor driver

● Synchronous clocks / latch / sync out

● Oversampling

● Direct module-to-module communication

The cost and performance optimized design of complex

automation solutions involves a large number of different

sensor and actuator types. The standard 10 V and 4 mA

to 20 mA interfaces are often not sufficient to achieve

demanding objectives.

With the UIO106. a single module type covers all common

analog and digital signals for inputs and outputs that can

be configured individually for each channel. The extensive

versatility of the module is rounded off by a wide range

of additional functions such as counters, encoders, pulse

width modulation and the control of a stepper motor

driver. This simplifies the entire process from the quotation

phase through planning, programming and commissioning,

right up to stockkeeping and servicing. Besides the 6 freely

configurable primary channels, up to 6 additional I/O chan

nels with restricted signal types are available.

Features

● 6-channel analog/digital input/output module

● Up to 6 additional channels depending on the required

signal type

● Configurable by channel: signal type and direction

● DI / counter / encoder

● DO / PWM

● AI current/voltage, Pt100. Pt1000. thermocouples (J, K, T,

N, E, R, S, B)

● AO current/voltage

● Control of a stepper motor driver

● Synchronous clocks / latch / sync out

● Oversampling

● Direct module-to-module communication

The range of the AIO104/I module type extends from current loops, high-impedance

voltage measuring ranges, temperature measurement via Pt100/Pt1000 sensor in 2-,

3- and 4-wire technology, as well as thermo-couples and free configurable resistance

measurement. The module offers the advantages of an extremely versatile multi-signal

type analog input/output module combined with channel-wise galvanic isolation.

The integrated measuring range and measured value monitoring enable both sensor

circuit faults as well as process alarms to be implemented easily.

The AIM112 module type is particularly useful when a large number of different interfaces

requires a correspondingly large variety of types of acquisition modules. Up to 12 analog

inputs can be individually configured to the desired signal type. Alternatively, channel types

for all industrially relevant thermocouples including integrated characteristic linearization

are available for measuring very wide temperature ranges.

Power supply modules type PSI135 feed the backplane

and the internal supply sections of plugged modules. The

integrated galvanic isolation decouples disturbances and

separates supply groups strictly. Up to 4 PSI135 modules

can be operated simultaneously on one backplane, providing

supply redundancy in the event of a primary supply

or infrastructure failure. The remaining load is distributed

evenly on the unaffected modules. The devices measure all

relevant quantities of supply and load circuit automatically,

aggregate them to meaningful diagnostic information on

the application interface as well as visual indication.

Features

● 35 W rated power output at Ta = -30 °C to +70 °C

● Buffering for failure according to IEC 61131-2 PS2,

logging

● Galvanic isolation of 850 V AC, rms to the system

● Supply redundancy due to multiple power feeds

● Measurement of supply and load circuit

● Extended diagnostics and load aggregation

● Eventlog power fail safe

Empty slots on backplanes are useful for optional retrofits,

machine variants or for keeping reserve space in plant con

struction. The BPC101 backplane slot cover protects each

slot from mechanical influences, electrostatic discharge

and contamination. BPC101 can be fitted both between

mounted modules as well as mounted side by side. In both

cases the achieved degree of protection is IP40.

Features

● M100 system backplane slot cover for 1 slot

● Compatible with BPR1nn and BPS1nn backplanes

● Direct side by side mounting or between modules

● Can be used for any slot (except 0/C)

● Screw mounting

● Captive screw

● Degree of protection IP40

Die Busschiene vereint den Buskoppler und die I/O-Module

zu einer mechanisch robusten, EMV-sicheren Einheit. Voll

ständige I/O-Stationen können somit nach der Montage

vorgetestet und ohne weitere Veränderung in die Anwen

dung übernommen werden. Der Aufbau ermöglicht Tausch

und Nachrüstung einzelner Module ohne Demontage der

nicht betroffenen Module.

Die Busschiene ermöglicht die Echtzeitdatenkommunika

tion zwischen den Modulen und dem Buskoppler, versorgt

die Logikseite der Module mit Energie und ermöglicht die

Modul-zu-Modulkommunikation.

Die Befestigung mit massiven M5-Schrauben macht diese

Variante prädestiniert für Umgebungen mit hohen Schock

und Vibrationsbelastungen. Der solide Metallkörper und

die große rückseitige Montagefläche bieten eine hohe Wär

meableitung an die Tragkonstruktion, was die thermischen

Reserven bei Anwendungen mit hohen Umgebungstempe

raturen erhöht.

Features

● Busschiene System M100 für Schraubmontage

● 4 bis 32 Steckplätze

● Mechanisch robuste, selbsttragende Basis für Module

● Modultausch ohne Demontage anderer Module

● Ermöglicht vollständige Vormontage und Test

● Beliebige Steckplätze als Reserven möglich (Lücken)

● Verstärkte Wärmeabfuhr über rückseitige Montage

fläche

The backplane combines the node adapter and the I/O

modules into a mechanically robust EMC compliant unit.

Fully assembled I/O stations can thus be pre-tested after

mounting and transferred to the application without fur

ther modification. This assembly enables individual mod

ules to be exchanged and retrofitted without having to

remove the unaffected modules.

The backplane enables real-time communication between

modules as well as with the node adapter, provides the

power supply to the logic side of the modules and enables

module-to-module communication.

Fastening with solid M5 screws makes this variant ideal for

environments that are exposed to high shock and vibration

loads. The solid metal body and large mounting area on the

rear allow high heat dissipation to the support structure.

This increases thermal reserves for applications involving

high ambient temperatures.

Features

● M100 system backplane for screw mounting

● 4 to 32 slots

● Mechanically robust, self-supporting base for modules

● Module exchange without the removal of other mod

ules

● Enables complete pre-assembly and testing

● Any slots possible as reserve (gaps)

● Enhanced heat dissipation via rear mounting surface