Category: ABB

Key product features

• Suitable for use with or without an input isolation transformer

• Meets IEEE 519 and IEC 61000-2-4

• Direct-to-line configuration (transformer-less) allows 3 in

and 3 out power cabling for quick and easy installation

• Multi-level switching topology and built-in dV/dt filtering

enables use with new or existing induction motors

• Regenerative option and ability to maintain near unity power

factor across the entire speed range provides additional energy savings

• Modular construction provides high reliability and low

maintenance costs

• Configurable disconnect option package for a flexible, self

contained switchgear solution

Experience unparalleled performance with the ABB 3BUS208720-001.

an advanced power signal interconnect designed to meet the demands

of modern industrial automation. This robust component ensures efficient

data transmission, critical for the smooth operation of complex systems.

Crafted from high-grade aluminum alloy, our interconnects offer durability

and lightweight design, ideal for various industrial settings. The compact

size (250mm x 30mm x 70mm) allows for easy installation and integration

without compromising on functionality.

Engineered for extreme conditions, this interconnect operates efficiently

within a wide temperature range (-20°C to +60°C), ensuring reliable

performance year-round. It is CE, UL, and CSA certified, meeting international

safety standards for peace of mind.

Weighing just 0.45 kg, the ABB 3BUS208720-001 is a lightweight yet sturdy

solution for connecting critical components in your industrial setup. Its compact

dimensions make it suitable for space-constrained environments, without

sacrificing its ability to handle high-frequency signals.

Enjoy the added benefit of a comprehensive 3-year warranty, providing you

with the confidence and assurance that your investment is protected.

 Features and benefits

 • Supports Ethernet/IP and Device Net protocols

 • Support 6 redundant pairs of CI873A from 5.1 FP4

The CI873A is an AC 800M communication interface that connects to

 external Ethernet devices using the EtherNet/IP protocol. The TP867

 Baseplate has two RJ45 Ethernet connectors, but only the CH1

 connector that supports 100Mbps is used. The CI873 expansion unit

 contains the CEX-Bus logic, a communication unit, and a DC/DC

 converter that supplies the required voltage from +24 V supply

 through the CEX-Bus.

 The CI873A module wi l only work with System 800xA 6.0.3.3, 6.1.1

 and subsequent versions. The CI873A support 6 redundant pairs of

 CI873A from 5.1 FP4.

Select I/O is an Ethernet networked, single-channel granular I/O system for the

ABB Ability™ System 800xA automation platform.Select I/O helps decouple project tasks,

minimizes the impact of late changes, and supports standardization of I/O cabinetry

ensuring automation projects are delivered on time and underbudget. A Signal Conditioning

Module (SCM) performs the necessary signal conditioning and powering of the connected field

device for one I/O channel.

The DIS880 is a Digital Input 24V Signal Conditioning Module for use in High Integrity applications

(certified for SIL3) supporting 2/3/4-wire devices with Sequence of Events (SOE).

Features and benefits

• Digital input for 2-wire, 3-wire and externally powered 4-wire field devices

• Can be used in hazardous areas

• Field device power output current limited to 30 mA

• Channel to channel galvanic isolation

• Configurable software signal filter 0…100 ms

• Protected against wrong wiring

• Diagnostics:

– Loop supervision (open circuit and short circuit)

– Hardware error supervision

– Communication supervision

– Internal power supervision

• Sequence of Events (SoE)

• DIS880 supports both Normally Open (NO) and Normally Closed (NC) 24 V loops and both will

confirm to SIL3.

• Single loop granularity – each SCM handles a single channel

• Supports hot swap

• Mechanical locking slider which turns off field device power and/or output before removal

• Field disconnect function which can galvanically separate the field loop wiring from the SCM during

commissioning and maintenance

• All SCMs have electronic current limitation

• Mechanical keying to prevent insertion of wrong module type after commissioning

• 24V DC powered through Modulebus

• Configurable through parameters

• LED indicators on the SCM indicate the operational state of the module

• Certified for SIL3

The remote S900 I/O system can be installed in non-hazardous

areas or directly in Zone 1 or Zone 2 hazardous area depending on

the selected system variant. S900 I/O communicates with the

control system level using the PROFIBUS DP standard. The I/O

system can be installed directly in the field, therefore the costs for

marshalling and wiring are reduced.

The system is sturdy, error-tolerant and easy to service. Integrated

disconnection mechanisms allow replacement during operation,

meaning that there is no need to interrupt the primary voltage in

order to exchange the power supply units.

S900 I/O type N. For installation in safe (= non-hazardous) area.

CI920AN Communication Interface V 2.1 (CIPBA), for Fieldbus

protocol PROFIBUS DP-V1 (IEC 61158). Use only CI920AN with the

same firmware for redundancy for PROFIBUS DP-V1 (observe

Release Notes).

Features and benefits

• Redundancy (Power and Communication)

• Hot Configuration in Run

• Hot Swap functionality

• Extended Diagnostic

• Excellent configuration and diagnostics via FDT/DTM

• G3-coating for all components

• Simplified maintenance with auto-diagnostics

• Fieldbus protocol PROFIBUS DP-V1 (IEC 61158)

• Coupling of the internal CAN bus to external PROFIBUS

• HART over PROFIBUS DP-V1

• Line or media redundancy via two coupling modules

• Electrical isolation between fieldbus, power

• Diagnosis, configuration and parameterization via PROFIBUS

Features and benefits

– Redundancy (Power and Communication)

– Hot Configuration in Run

– Hot Swap functionallity

– Extended Diagnostic

– Excellent configuration and diagnostics via FDT/DTM

– G3 – coating for all components

– Simplified maintenance with auto-diagnostics

– Output signal 0/4…20 mA for actuators

– Short and break detection

– Electrical isolation between output / bus and output / power

– Electrical isolation channel to channel

– 4 channels

The remote S900 I/O system can be installed in non-hazardous

areas or directly in Zone 1 or Zone 2 hazardous area depending on

the selected system variant. S900 I/O communicates with the

control system level using the PROFIBUS DP standard. The I/O

system can be installed directly in the field, therefore the costs for

marshalling and wiring are reduced.

The system is sturdy, error-tolerant and easy to service. Integrated

disconnection mechanisms allow replacement during operation,

meaning that there is no need to interrupt the primary voltage in

order to exchange the power supply units.

S900 I/O type N. For installation in safe (= non-hazardous) area.

AO920N Analog Output (AO4I), output signal 0/4…20 mA for

actuators.

Features and benefits

– Redundancy (Power and Communication)

– Hot Configuration in Run

– Hot Swap functionallity

– Extended Diagnostic

– Excellent configuration and diagnostics via FDT/DTM

– G3 – coating for all components

– Simplified maintenance with auto-diagnostics

– Output signal 0/4…20 mA for actuators

– Short and break detection

– Electrical isolation between output / bus and output / power

– Electrical isolation channel to channel

– 4 channels

Features and benefits

• ATEX Certification for Zone 2

• Redundancy (Power and Communication)

• Hot Configuration in Run

• Hot Swap functionality

• Extended Diagnostic

• Excellent configuration and diagnostics via FDT/DTM

• G3 – coating for all components

• Simplified maintenance with auto-diagnostics

• Power supply for 4…20 mA loop powered 2-wire transmitters

• Short and break detection

• Electrical isolation between input / bus and input / power

• 4 channels