Archives

The IS200VTURH1B is GE’s main turbine protection plate for the Mark VI system.

The Mark VI is one of several gas/steam turbine management systems released by GE as part of the “Speedtronic” family.

The MKVI is built on a TMR (Triple Modular Redundancy) architecture and features a connected HMI (Human Machine Interface) that allows the user to access turbine data from a central location.

The IS200VTURH1B provides a variety of functions including monitoring the sensing shaft current/voltage (overshoot alarm), the

measuring turbine speed to generate a primary overspeed trip, and controlling the three primary overspeed trip relays belonging to the TRPx terminal board.

The board also monitors eight Geiger-Mueller flame detectors on the gas turbine.

The IS200VTURH1B has an attached single-slot panel with three LED indicators and a cable connector (J5).

The panel is connected to the PCB by three screw connections. the PCB consists of more than 60 integrated circuits, 13 transistors, hundreds of capacitors and resistors, as well as diodes and inductive coils.

The board has two backplanes, a multi-position female plug for connecting daughter boards, and several connectors made of conductive dots and traces.

The IS200SAMBH1A has an attached metal frame that surrounds the PCB on all four sides.

The frame has a flat-top flange along each long side of the board that has been drilled with mounting slots or holes, as well as other flanges.

Various codes, including FA/00. are written on the surface of the board.

Standoffs and screw mounts attach the board assembly to the frame described earlier.

The board measures 9.1 inches x 5.625 inches. Air convection is used to cool the room.

The IS200SAMBH1A is a circuit board assembly manufactured by GE for the Mark VI and Mark VIe systems.

Both systems are GE-designed platforms that serve as management tools for their heavy-duty turbines, with the advantage of GE-designed integrated software and hardware.

This IS200SAMBH1A is used as an acoustic monitoring terminal board. It is a dual terminal board that provides 18 inputs for the acoustic monitoring system.

The board has 36 terminals dedicated to 2-wire inputs. It also has 36 terminals for connecting external meters to the 2-wire buffered outputs.

This will provide 18 outputs. The outputs are used to monitor AC voltage signals.

The IS200SAMBH1A has an EMI (Electromagnetic Interference) filter to protect against very high frequency noise from external sources.

The IS200SAMBH1A is surrounded by a metal frame on all four edges. The frame has a flat top flange along both long sides of the plate.

Description

The IS215UCCCH4A is a VME controller board manufactured by General Electric as part of the Mark VIe family for gas turbine control systems.

It is a modular assembly consisting of the IS200 EPMC daughter board, IS215UCCC H4. 128 MB of flash memory, and 256 MB of DRAM.

Sometimes referred to as the 3U Compact PCI, there are six Ethernet-style ports on the panel. The labeling indicates the intended function of each port.

In addition, the panel has a number of LEDs. the controller detects certain system errors during startup, download, and normal operation.

Diagnostic alerts can be displayed and reset from the ToolboxST application and logged as history on WorkstationST.

Frequently Asked Questions

What is the GE Mark VIe IS215UCCCH4A?

The IS215UCCCH4A is a VME controller developed under the Mark VIe system.

What is the purpose of the interference suppressors on the VME controller?

These suppressors block the output of external power sources such as radios, cell phones and other similar devices.

What is a VME connector?

The Versa Module Eurocard bus is a computer bus standard used in embedded systems.

Hardware Tips and Specifications

The IS215UCVEM06A is an Ethernet connected board. The IS215UCVEM06A then uses multiple ports on the front of the device.

These ports vary in shape and size. These ports are used to connect Ethernet cables and COM ports.

The IS215UCVEM06A uses various components such as capacitors, diodes, resistors, SD cards, batteries, and integrated circuits.

Each component works separately to help the board function as a whole. The condenser saves a variety of energy for the board.

Diodes direct energy in one direction instead of another. Resistors are a way for the board to get rid of energy that the board is not using.

SD cards are used as information and data storage. Integrated circuits are used to control the board. They hold all the data that tells the board how to perform.

The IS215UCVEM06A slides into place and has male terminals on the back for connecting this board to your system. There are other connection locations on the circuit board.

The IS215UCVEM06A has a large cooling unit that takes up half of the circuit board.

As mentioned earlier, this IS215UCVEM06A product of the larger Mark VI turbine control system family is a product family that rarely comes with a lot of original instruction manual material available online;.

With this concerted lack of identification, the IS215UCVEM06A Functional Product Number itself can be viewed as a fairly robust primary source of IS215UCVEM06A Board hardware information.

This is because it actually encodes a series of functionally named segments of uniquely relevant IS215UCVEM06A Board details.