For Safe Use of Product

For the protection and safety of the operator and the

instrument or the system including the instrument, please

be sure to follow the instructions on safety described

in this manual when handling this instrument. In case

the instrument is handled in contradiction to these

instructions, Yokogawa does not guarantee safety.

Please give your attention to the followings.

(a) Installation

• The instrument must be installed by an expert

engineer or a skilled personnel. The procedures

described about INSTALLATION are not permitted for

operators.

• In case of high process temperature, care should

be taken not to burn yourself because the surface of

body and case reaches a high temperature.

• The instrument installed in the process is under

pressure. Never loosen the process connector bolts

to avoid the dangerous spouting of process fl uid.

• During draining condensate from the pressure

detector section, take appropriate care to avoid

contact with the skin, eyes or body, or inhalation of

vapors, if the accumulated process fl uid may be toxic

or otherwise harmful.

• When removing the instrument from hazardous

processes, avoid contact with the fl uid and the interior

of the meter.

• All installation shall comply with local installation

requirement and local electrical code.