LEDs and Connectors

The module’s three DeviceNet-compliant LEDS show its operating and communications status.

The RS-232 serial port is used for a computer connection during firmware upgrades. The

DeviceNet connector is a removable spring-clamp terminal. It provides bus continuity and can

be removed from the module without disrupting bus operation.

The DeviceNet Bus

Devices can be connected directly to the trunk cable, or to drop lines that are joined to the trunk

cable with taps. Taps can be mounted in junction boxes or panels. Drop lines and daisy-chains

are often used inside control panels where multiple devices are grouped together.  When using

drops with daisy-chains and branches, the maximum length from a tap to its farthest drop is 20 feet.

Current Limit for Thick Cable

For thick cable, the maximum current on the network is 16 Amps.  However, only 8 Amps is

permitted on a single network segment. 16 Amps can be drawn from a single power supply by

locating the power supply at the center point of two network segments, supplying 8 Amps to

each segment.

Current Limit for Thin Cable

For thin cable, the maximum current permitted is 3 Amps.