OVERVIEW

The SGC 410 controller is a modern island genset controller with a user-friendly HMI and full graphic LCD.

It includes voltage and frequency measurement of the genset as well as electrical load measurement (True RMS).

Configurable analog and digital inputs/outputs are provided for various functions.

Remote communication is available via RS-485 Modbus and CAN ports.

The genset can be started and stopped remotely using the remote start/stop function.

Deep sleep mode is a useful feature that extends battery life by suspending the normal function of the controller when the genset is shut down.

Monitor engine safety, electrical load, on-site standby battery voltage, and shelter temperature (to reduce fuel consumption).

Configure parameters from a PC using the DEIF Smart Connect utility software. Connects to the PC via the controller’s USB Type B port.

Environmental

– Vibration: 2 G in X, Y, and Z axes per IEC 60068-2-6

– Shock: 15 g, 11 ms per IEC 60068-2-27

– Humidity: 0 to 95 % RH per IEC 60068-2-78

– Enclosure rating Front gasketed IP65 per IEC 60529

– EMI/EMC: IEC 61000-6-2. 4

Approvals

– CE marking:

Complies with the EU Low Voltage Directive: EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 1: General requirements.

Compliance with EU EMC Directive EN 61000-6-2. 4