Year: 2026

The MVR-F215 feeder protection relay is ideal for application which require current and voltage

based protection like directional feeder protection. The device supports IEC 61850 communication.

Additional I/O and communication cards can be added by using 3 available extension slots.

– 5x Current input (configurable 0.2…10A)

– 4 x Voltage input (1.00…480.00V (RMS)

– 3x Digital input

– 5x Output relay (4NO, 1CO)

– 1x IRF output (1CO)

– 2x Remote com port (1 x RJ45 Ethernet and 1 x RS-485)

– IEC 61850 Ed1. Modbus TCP/RTU, IEC 60870-5-104/103/101. DNP 3.0. SPA protocols

– DT, IEC or ANSI time/overcurrent curves with settable release delays

– 3 extension slots for additional hardware options

– Event recorder (up to 15 000 events)

– Disturbance recorder (up to 100 disturbance records)

Available Extension Cards:

– 8x digital inputs (programmable threshold voltage)

– 5x output relays

– Arc-Flash Protection – 4x sensor channels, 2x HSO1. 1x BI *)

– 8x RTD input

– 2x RJ45 100Mb Ethernet & IRIG-B *)

– 2x ST 100Mb Ethernet & IRIG-B *)

– 4x mA outputs – 1 x mA input

– 2x LC 100MB Ethernet (HSR, PRP redundant protocols)

– 2x RJ45 100MB Ethernet (HSR, PRP redundant protocols) *)

– RS-232 – Serial Fiber

*) Land based applications only. Not marine approved

Marine approvals

– DNV/GL

– Lloyds Registeres LR

– Bureau Vertias BR

– ABS (USA)

– CCS (China)

– CNK (Japan)

– IEC (Israel)

– KR (Korea)

– UKCA (UK)

– RINA (Italy)

Applications

A wiring example and key ANSI functions are shown below.

Features

High performance, good usability

Functions

• Full protection for feeders

• Bay control, alarm, measurement and monitoring

• Large customisable HMI with configurable Mimic diagram

• Configurable LEDs

• Large flash memory for events, logs, recordings and documentation

◦ 15.000 events and 100 disturbance recordings

• Easy-to-use and powerful MVR Utility Software for setting, configuration and analysing

• Full set of communication protocols, including IEC 61850

Versatile protection design

• Fast, versatile and dependable protection functions over a wide frequency range (6 to 75 Hz)

• Suitable for the most demanding protection applications

Modularity

• Fully modular hardware construction

• Plug in more I/O or communication cards to meet the application requirements

Usability

• Sophisticated setting aids

• Highly customisable HMI

• Storage of PDF or other supportive documents

• Extensive user log information

◦ Setting changes

◦ Other operational history

Performance

• Sub-cycle instantaneous trip times

• Logics editor for ladder logic functionality

• Up to 100 disturbance records, of up to 10 seconds each

• 10.000 events stored in non-volatile memory

Product description

About

The MVR-F215 directional feeder protection relay is a modular feeder protection and control solution for

applications that require current-based and voltage-based protections, and complete measurements. You

can add up to three I/O or communication modules for more comprehensive monitoring and control. The

MVR-F215 feeder protection relay communicates using various protocols, including the IEC 61850.

Savings in engineering time

• MVR Utility Software free-of-charge software suite with an intuitive and easy-to-use human

machine interface

• Download all relay settings instantly using native 100 Mb/s Ethernet connection (front port or

rear port)

Standardised hardware

• Standardised hardware design, for simpler logistics and stock management

• Five CT inputs with configurable secondary currents

• Configurable digital input voltage thresholds

Communication

• Native Ethernet communication

• A variety of standard protocols including the IEC 61850 substation communication standard

with fast GOOSE messaging

IEC 61850 & IEEE 1588

• High-availability Seamless Redundancy (HSR) support

• Parallel Redundancy Protocol (PRP) support

• Precision Time Protocol (PTP) according to IEEE 1588

Features

Protection Functions:

• (Sensitive) Earth fault protection stages INST, DT or IDMT (ANSI 50N/51N(S))

• Auto-reclose (ANSI 79)

• Breaker failure protection (ANSI 50BF)

• Cable-end differential protection (ANSI 87)

• Cold-load pick-up block (ANSI 68)

• Current transformer supervision (ANSI 60L)

• Current unbalance/broken conductor protection stages INST, DT or IDMT (ANSI 46 /R/L)

• Harmonic over-current protection/inrush blocking stages INST, DT or IDMT (ANSI 50H/51H/68)

• Programmable stage (ANSI 99)

• Restricted low-impedance earth fault protection (ANSI 87N)

• Switch onto fault logic (SOTF)

• Thermal overload protection (line) (ANSI 49L)

• Three-phase over-current protection INST, DT or IDMT (ANSI 50/51)

• Voltage memor

The MVR-F210 feeder protection relay is a modular feeder protection and control solution,

with non-directional overcurrent and earth fault protections with an automatic recloser.

You can add up to 4 I/O or communication modules for more comprehensive monitoring

and control applications. The MVR-F210 feeder protection device communicates using

various protocols, including the IEC 61850.

Applications

A wiring example and key ANSI functions are shown below.

Programmable stage (PSx>/<; 99)

The programmable stage is a stage that the user can program to create more advanced

applications, either as an individual stage or together with programmable logic.

The device has ten programmable stages, and each can be set to follow one to three

analog measurements. The programmable stages have three available pick up terms options:

overX, underX and rate of-change of the selected signal. Each stage includes a definite

time delay to trip after a pick-up has been triggered.

The programmable stage cycle time is 5 ms. The pick-up delay depends on which analog

signal is used as well as its refresh rate (typically under a cycle in a 50 Hz system).

The MVR-F210 feeder protection relay is used for applications requiring non-directional

overcurrent protection with automatic recloser. The device supports IEC 61850 communication.

Additional I/O and communicaton cards can be added by using the 4 extension slots.

-5x Current input (configurable 0.2…10A)

-3x Digital input

– 5x Output relay (4NO, 1CO)

– 1x IRF output (1CO)

– 2x Remote com port (1 x RJ45 Ethernet and 1 x RS-485)

– IEC 61850 Ed1. Modbus TCP/RTU, IEC 60870-5-104/103/101. DNP 3.0. SPA protocols

– DT, IEC or ANSI time/overcurrent curves with settable release delays

– 4 extention slots for additional hardware options

– Event recorder (up to 15 000 events)

– Disturbance recorder (up to 100 disturbance records)

Available Extension Cards:

– 8x digital inputs (programmable threshold voltage)

– 5x output relays

– Arc-Flash Protection – 4x sensor channels, 2x HSO1. 1x BI *)

– 8x RTD input

– 2x RJ45 100Mb Ethernet & IRIG-B *)

– 2x ST 100Mb Ethernet & IRIG-B *)

– 4x mA outputs – 1 x mA input

– 2x LC 100MB Ethernet (HSR, PRP redundant protocols)

– 2x RJ45 100MB Ethernet (HSR, PRP redundant protocols) *)

– RS-232 – Serial Fiber

*) Land based applications only. Not marine approved

Marine approvals

– DNV/GL

– Lloyds Registeres LR

– Bureau Vertias BR

– ABS (USA)

– CCS (China)

– CNK (Japan)

– IEC (Israel)

– KR (Korea)

– UKCA (UK)

– RINA (Italy)

Highly customisable architecture

All PPM 300 variants can be specified with 4 or 7 I/O module slots. The modules provide

voltage and current measurement, I/O, engine control, governor and AVR functions,

and communication. Three modules are mandatory, but you can use the remaining 1

or 4 slots to customise the controller by adding modules or leave them empty.

In addition, you can add up to 9 expansion racks to a single PPM 300 to get up to 58

free module slots (up to 4 in the base rack and up to 6 in each expansion rack).

Unique ANSI 87G differential protection

With the optional ACM3.2 module, you can add ANSI 87G differential protection for generators.

The module measures phase currents on the consumer and neutral sides of a generator in order

to detect phase-to-phase faults or phase-to-earth faults in earthed generator systems.

With this unique feature, you can design reliable and safe power systems without external

differential protection devices.

Customisable shaft generator controller designed for efficient power management

The PPM 300 Shaft generator controller controls and protects the system

when a shaft generator is connected, and it controls and protects the shaft generator breaker.

When a shaft generator is connected, it is normally the ship’s only power source,

but it can run in parallel with the gensets and supply a base load for an extended period

(long-time parallel). In such cases, the PPM 300 Shaft generator controller works with

the PPM 300 Genset controllers to ensure efficient power management.

A DEIF power management system can include as many Shaft generator controllers as necessary.

Part of the versatile PPM 300 range

The PPM 300 Shaft generator controller is part of the DEIF PPM 300 range of versatile

controllers with built-in multi-master power management features.

The range offers variants designed for a wide range of marine and offshore applications

–from generator control and protection to engineered power management solutions

developed for generators, battery energy storage, shore connections, and bus tie breakers.

For general information about the PPM 300 range, see the PPM 300 main page.

Highly customisable architecture

All PPM 300 variants can be specified with 4 or 7 I/O module slots. The modules provide

voltage and current measurement, I/O, engine control, governor and AVR functions,

and communication. Three modules are mandatory, but you can use the remaining 1

or 4 slots to customise the controller by adding modules or leave them empty.

In addition, you can add up to 9 expansion racks to a single PPM 300 to get up to 58

free module slots (up to 4 in the base rack and up to 6 in each expansion rack).