Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Month: November 2026

Home / 2026 / November (Page 17)
November 3, 2026 BY
IN Kollmorgen

Kollmorgen 1G Motion System

Kollmorgen’s first generation motion system offers the broadest range of features and options, so engineers can build with confidence. By combining the unmatched configurability of the AKM servo motor and high-performing AKD servo drive, the 1G Motion System is designed to deliver best-in-class performance with the flexibility to meet exact application needs. It comes with Kollmorgen’s most advanced position feedback solution, versatile communication protocols, plug-and-play setup and high-efficiency performance for optimized motion and unrivaled freedom.

Whether adding to new or existing machines, the Kollmorgen 1G Motion System provides an exact-fit and cost-effective solution that combines proven performance, versatility and reliability into one powerful and easy-to-use system. When you want motion fit for your machine without needing customizations or costly upgrades, 1G delivers.
November 3, 2026 BY
IN Kollmorgen

Kollmorgen Essentials™ A quick, confident pathway to market

A quick, confident pathway to market

Our new motion control systemis highly manufacturable at scale, and the most in-demand configurations are always in stock. And with plug-and-play installation, you can more easily engineer a successful machine and bring it to market quickly.

• Curated set of frame sizes and performance specifications. System offerings ranging from 200W to 4000W with ratings optimized for 120. 240. 400 or 480 VAC operation and frame sizes between 58 to 138mm.

• Highly manufacturable at scale. The most in-demand configurations are always in stock. So you can count on assured delivery of the systems you need, in the quantities you need, with short lead times.

• Plug-and-play installation. By default, the servo system is configured to work with Kollmorgen Automation Suite, but you can switch to work with third-party control system architectures using EtherCAT, Ethernet/IP or PROFINET. The new Express Setup feature in our WorkBench software makes setup, configuration and tuning simple, even for engineers with little motion experience. And the full suite of WorkBench tools is also included for more advanced motion programming and tuning tasks.
November 3, 2026 BY
IN Kollmorgen

Kollmorgen Essentials™ Optimized features at an exceptional value

Optimized features at an exceptional value

We recognize that not all axes of servo motion require the same degree of specialization. That’s why we created this new value-driven motion control system — with features optimized to meet the most prevalent application requirements.

• Standard batteryless multi-turn absolute feedback device. Get 24-bit single-turn + 16-bit multi-turn absolute feedback resolution over a proven SFD protocol interface. Complete with energy-harvesting technology to eliminate the cost and complexity of battery backup cables and onboard memory to enable plug-and-play setup for faster commissioning.

• Multilingual industrial Ethernet protocols. One harmonized drive can support practically any customer’s needs, interfacing with any of the industry’s most common communication protocols: EtherCAT®, EtherNet/IP™ or PROFINET®.

• Synchronization capabilities. The Kollmorgen Essentials motion system supports synchronous motion profiles using your choice of EtherCAT®, CIP Sync or PROFINET IRT.

Integrated functional safety features. Protect people, products and equipment with dua-channel STO SIL2/Cat 3 PL d. This feature supports emergency stops and prevents the system from restarting unexpectedly.
November 3, 2026 BY
IN Kollmorgen

Kollmorgen Essentials™ Motion Systems

Get the essential motion control system features and performance you need — plus unprecedented value, rapid delivery and easy setup and configuration. The new Kollmorgen Essentials line delivers complete motion control systems, engineered to help machine designers meet practically any motion requirement and budget with ease and confidence.

With a range of size and performance options to choose from, each motion control system includes: a servo motor offered in eight power ranges; a servo drive designed to work with your choice of the industry’s most widely used Industrial-Ethernet control systems as well as with the full line of software and hardware solutions in the Kollmorgen Automation Suite; a cable in a choice of lengths, featuring single-cable power/data technology to simplify setup; and optional accessories including regen resistors, line filters and spare drive-side connectors.
November 3, 2026 BY
IN Woodward

Woodward Stop/Ratio Valve Operation

Stop/Ratio Valve Operation

The Gas Stop/Ratio Valve actuator is controlled by an electronic servo-control system (not included),

which compares the demanded and actual valve positions. The control system modulates the input

current signal to the electrohydraulic servo valve to minimize the positioning system error. See Figure 1-2

for a functional schematic of the single acting actuator.

Hydraulic oil enters the actuator via a removable element filter with integral high P indicator and is

directed to a four way, electrohydraulic servo valve used in a three-way configuration. The PC1 control

pressure output from the servo valve is directed to the top of the hydraulic piston. When the force

exerted by the hydraulic pressure exceeds the force of the opposing loading springs, the output piston

extends, rotating the valve in the opening direction.

A trip relay valve assembly is interposed between the electrohydraulic servo control valve and the servo

output stage. Loss or reduction of the externally supplied trip signal pressure causes the trip relay valve to

shift position. This connects the upper cavity of the actuator piston to the hydraulic drain. The force

supplied by the return springs pushes the actuation rod up, rotating the valve to the closed position.

Two redundant LVDT position feedback transducers are also mounted within each actuator. An optional

third LVDT is available on the 6” and 8” stop/ratio actuators only. The LVDT sensor cores and support

rods are connected to the main actuator output rod by a coupling arrangement guided on a bushing. This

guide bushing maintains LVDT alignment to minimize core damage due to sliding wear and the

associated loss of sensing accuracy.
November 3, 2026 BY
IN Woodward

Woodward Optimum control of the gas turbine requires

Optimum control of the gas turbine requires that the actuator and valve accurately and quickly track the

demand signals transmitted by the control. The stop/ratio valve has been designed to provide output

forces that exceed the opening and closing requirements with some margin. The additional margin helps

ensure that the system moves rapidly even under service conditions where the valve has been

contaminated or worn. The hydraulic trip relay valve has been selected to provide high operating force

margins, high flow capacity, and to ensure the desired closure rate of the valve under trip conditions.

By using a long actuation rod between the hydraulic cylinder and the valve lever arm, the side-loading

forces on the actuator shaft and seals are greatly reduced, decreasing the wear between sliding parts,

and increasing the useful service life of the system. The ample distance between the wetted heavy-duty

linear slide rings within the stop/ratio valve accommodates any remaining side load. These provisions

provide extended service life even in severe service conditions.
November 3, 2026 BY
IN Woodward

Woodward Gas Stop/Ratio Valve

General Information

The Woodward Gas Stop/Ratio Valve performs a dual function for industrial or utility gas turbines. One

function rapidly shuts off fuel to the turbine fuel control system. Another function provides accurate control

of gas fuel pressure at the outlet of the stop/ratio valve. This pressure is applied to the inlets of the gas

fuel control valve.

The Gas Stop/Ratio Valve features a modular design and meets critical control characteristics while

allowing the same valve design to accommodate a variety of stroke, force output, and mechanical

interface arrangements. The electrical and mechanical interfaces have been designed for quick and easy

assembly or removal of the valve, at the factory or in the field. The components include an

on-board hydraulic filter, electrohydraulic servo valve, trip valve, single-acting hydraulic cylinder, and dual

LVDTs (the 6” and 8” valves also have the option for triple LVDTs).
November 3, 2026 BY
IN Beckhoff

Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs

The EK1818 has two RJ45 sockets. The upper Ethernet interface is used to connect the coupler to the network; the lower socket

serves for the optional connection of further EtherCAT devices in the same segment. In addition, an EtherCAT junction or an

EtherCAT extension can be used for the extension or for setting up a line or star topology.

The system and field supply, each 24 V DC, is provided directly at the coupler. The attached EtherCAT Terminals are supplied with

the current required for communication from the supplied system voltage. The coupler can supply a maximum of 5 V and 1 A. If

higher current is required, power feed terminals such as the EL9410 have to be integrated. The field supply is forwarded to the

individual I/O components via the power contacts with up to 10 A.
November 3, 2026 BY
IN Beckhoff

Beckhoff EK1818 Special features

The EK1818 EtherCAT Coupler is the link between the EtherCAT protocol at fieldbus level and the EtherCAT Terminals. In addition,

eight digital inputs and four digital outputs are integrated. The resulting design is particularly suitable for applications with a small

number of I/Os. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station

consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the

process image.

Special features:

• Connection technology: 2 x RJ45 socket

• Connection lengths: up to 100 m

• 8 digital inputs and 4 digital outputs

• Number of EtherCAT Terminals in the overall system: up to 65.535

Menu

Search for products

Back to Top
Product has been added to your cart