Welcome to the official website of CNIACS Automation Technology Co., Ltd!

Autronica Fireman panel microphone kit

The Fireman Panel Microphone kit consists of an AutroSafe Fire Brigade

Panel BU-BV-420 and a miniVES/MULTIVES Fireman Microphone with zone

buttons in the same housing.

The AutroSafe Fire Brigade Panel is placed in the upper section of the kit. It is intended to provide information

related to fire alarms in the relevant Operation Zone and allow the fire brigade to operate fire alarms.

The panel displays alarms and allows you to operate alarms and receive additional information related to the

relevant operation zone. To operate alarms, a fireman’s key must be used (access level 2).

The panel is used to silence sounders and to reset alarms within a defined operation zone.

The panel provides the following buttons:

 More Events button

 Mute Panel button

 Silence Alarms button

 Reset System button

The panels provides the following indicators:

 Fire, More Events, Fire Brig. Signalled, Fault, Function Disabled, Testing, System Fault, Power

 Internal buzzer

For more detailed information about the Fire Brigade Panel, see separate datasheet (116-P-BU-BV-420/CGB).

Autronica Fire brigade loop panel BU-110

Description / Application

The unit has been designed for use with AutroSafe 4

Interactive Fire Detection System.

From the Fire Brigade Loop Panel BU-110 it is possible to

mute the panel’s internal buzzer, silence/resound

sounders/bells etc. and reset the system.

The panel can be configured (by means of the

configuration tool) to show detection zones and point

information in an alarm situation, or detection zones

only.

Only points in alarm are shown in the display. Faults and

disablements are indicated by LED indicators. The total

number of detection zones in alarm will always be

shown.

By operating the More Events Button, it is possible to

scroll through and view detailed information of the first

64 alarms (or 32 first alarms, if the panel is configured to

show both detection zones and points).

The panel is powered by the detection loop.

Autronica BU-110 Operator controls

Operator controls

The panel offers the following buttons:

• More Events button for scrolling through several

alarms

• Silence Buzzer (60 dB) for silencing the internal buzzer

(access level 1). The internal buzzer will remain muted

until a new alarm is triggered

• Silence Alarm button

• Combined Reset button/Lamp Test (access level 1)

• Contrast settings: to start the contrast settings

(access level 1), press and hold the Silence Buzzer

button for 5 seconds until audible beep, observe

changes, then release the button to confirm the new

contrast (a new audible beep is heard)

Autronica BU-110 Features

Features

• User-friendly display and operator controls

• Scroll function for more alarms

• Text display suitable for full darkness operation

• On-wall mounting

• Conforms to EN 54 regulations

• Conforms to CE standards

• Designed to meet the requirement of the major

maritime classification societies

Indicators

The panel provides the following indicators:

• Fire symbol, Alarm Routing Activated, Fault, Function

Disabled, Test, System Fault, Power, More Events

• Internal buzzer

Capacity

A maximum of 8 panels can be connected to the

detection loop.

Compatibility – AutroGuard Protectors

When using AutroGuard protectors, note that

BU-110 firmware 1.6 or newer is required.

Autronica BV-110 Operator controls

Operator controls

The panel offers the following buttons:

• More Events button for scrolling through several

alarms within the same event window

• Silence Buzzer (60 dB) for silencing the internal

buzzer. The internal buzzer will remain muted

until a new alarm or fault is triggered

• Next Window button for stepping to a new event

window, for example from Fire Alarm to Fault

Warning window

• Contrast settings: to start the contrast settings

(access level 1), press and hold the Silence

Buzzer button for 5 seconds until audible beep,

observe changes, then release the button to

confirm the new contrast (a new audible beep is

heard)

• Lamp Test button for activating all indicators

Indicators

The panel provides the following indicators:

• Fire Symbol, Alarm Routing Activated, Fault,

Function Disabled, Test, System Fault, Power,

More Events

• Internal buzzer

Autronica Information loop panel BV-110

Description / Application

The unit has been designed for use with AutroSafe 4

Interactive Fire Detection System.

The Information Loop Panel BV-110 serves as an

indication device only. It provides information

related to the defined operation zone(s).

The panel can be configured (by means of the

configuration tool) to show detection zones and point

information in an alarm situation, or detection zones

only.

By operating the More Events Button, it is possible to

scroll through and view detailed information of the first

64 alarms (or 32 first alarms, if the panel is configured to

show both detection zones and points).

The panel can store up to 6 faults and 6

disablements. The total number of faults and

disablements in the system will always be shown,

but it is only possible to scroll through and view

detailed information of the first 6 faults and

disablements (using the More Events Button).

Compatibility – AutroGuard Protectors

When using AutroGuard protectors, note that

BV-110 firmware 1.6 or newer is required.

Autronica BV-110 Features

Features

• User-friendly display and operator controls

• Scroll function for more alarms

• Text display suitable for full darkness operation

• Displays alarms, faults and disablements

• Possible to change to different event windows

• On-wall mounting

• Conforms to EN 54 regulations

• Conforms to CE standards

• Designed to meet the requirement of the major

maritime classification societies

Indicators

The panel provides the following indicators:

• Fire Symbol, Alarm Routing Activated, Fault,

Function Disabled, Test, System Fault, Power,

More Events

• Internal buzzer

Capacity

A maximum of 8 panels can be connected to the

detection loop.

GE CONVERTEAM P110-6052 | Advanced Micro Controller

The CONVERTEAM P110-6052 is a robust and highly reliable PLC automation

component designed for a wide range of industrial applications.

This device is engineered with advanced technology to enhance operational

efficiency and productivity. The P110-6052 integrates seamlessly into various

automated systems, providing outstanding control capabilities and rigorous

performance monitoring.

The CONVERTEAM P110-6052 offers exceptional flexibility and adaptability,

allowing users to configure and customize its settings according to specific

requirements. With its user-friendly interface, the P110-6052 simplifies

operational tasks, making it an ideal choice for both experienced and novice

operators in automation environments.

Application Fields and Case Studies

The CONVERTEAM P110-6052 is widely used across diverse sectors,

including:

Manufacturing: For automating production lines and improving operational

efficiency.

Utilities: In systems for monitoring and controlling water and electricity

distribution.

Transportation: For signal control and monitoring in railway systems and traffic

management.

A notable case study involves a manufacturing plant that integrated the P110-6052

into its assembly line, resulting in a 30% increase in productivity due to improved

control and automation of the production processes.

AMAT Applied Materials Aera 6 Mask Inspection

The Applied Aera™ 6 Mask Inspection system is a sixth generation 193nm-based

inspection tool, unique in combining true aerial imaging with cutting-edge

high-resolution imaging.

Equipped with a new lithography-grade lens and double CCD system, the Aera 6

demonstrates enhanced signal-to-noise ratio for both standard high-resolution

applications and aerial inspection with improved throughput. Such capabilities

makes it the tool of choice for Memory and Logic most advanced nodes, including

those with aggressive optical proximity correction, such as inverse lithography

and EUV mask inspection. The system performs highly sensitive mask inspection,

as required for double- and quadruple-patterning lithography technologies, while

maintaining a very low false alarm rate.

Designed to emulate a lithography scanner, the Aera 6 system delivers a higher

inspection success rate over other high-resolution inspection systems with

advanced masks. Combined with its inherent automatic defect classification as

printing or non-printing, and by focusing on advanced AI algorithmic solutions,

the system allows mask makers to extend ArF technology to next-generation

nodes.

The Aera 6 system expands the mask inspection capabilities of mask shops and

fabs to promote longer mask lifetimes and reduce mask-related costs.

These capabilities include early haze detection, complete 193nm and EUV exposure

-degradation monitoring, 2.5nm resolution review of edge dislocation defects, and

full-mask critical dimension (CD) uniformity mapping using the IntenCD™ system.​

AMAT Applied Materials Cmp Tool Controller 0195-14157

Overview

This is a rack-mount industrial PC / system controller assembly for AMAT CMP

(Chemical Mechanical Planarization) semiconductor polishing tools, assembled

in USA. It acts as the main process control unit for CMP polishing head, platen,

slurry, endpoint, motion and I/O sequencing of the wafer planarization system.

Main Internal Components

Industrial motherboard: ADLINK MI-220

DAC/ADC board: PCB 1007-0101

Interface board: T115-0005 / PCB 1007-0097 REV 2C

Power supply: SOLA SDN 20-24-100C (24V DC power module)

Mechanical & Physical Info

Form factor: 4U rack mount enclosure with front handles

Weight: ~22 kg

Front panel: Power switch + 6 control buttons

Rear panel: Multiple DB serial ports, USB, power inlet, analog/digital I/O terminals

Cooling: Internal fan forced air cooling

Function

• Host control of CMP process recipe execution

• Real-time acquisition of polishing pressure, platen speed, temperature, slurry

flow and endpoint signals

• Motion control and interlock safety logic for CMP polishing head and platens

• Communication between tool host, chamber sensors and actuator subsystems

• Data logging, fault diagnosis and tool state management for CMP platform

Application

Applied Materials Reflexion series 300mm CMP polishing tools for wafer

planarization in semiconductor fab.

Search for products

Back to Top
Product has been added to your cart