Use outside of the DeltaV Control Network

The DeltaV Smart Switches is supported only as an unmanaged

switch if installed in networks outside of the DeltaV control

network, the DeltaV 2.5 network between the DeltaV

workstations and the perimeter firewall (such as the Emerson

Smart Firewall), or other DeltaV networks external to the DeltaV

control network. The switch will only accept a management

port network address from the DeltaV Network Device

Command Center and the switch can only be used where this

application is able to access the switch.

The DeltaV Smart Switches is not available for use as a managed

switch in the DeltaV InterZone network as the DeltaV Network

Device Command Center cannot access the switch if located on this network.