Hardware Tips and Specifications

The GE Generator Control Turbine Board DS200CVMAG1AEB contains two 16-pin connectors and one 2-pin connector. The board is also equipped with 6 test points.

The GE Generator Control Turbo Board DS200CVMAG1AEB can be damaged by static electricity, so care must be taken when handling and installing the board.

When you open the box in which the board was shipped, you will notice that the board is packaged in a sealed plastic bag.

When the bag is sealed, it serves multiple purposes. It protects the board from dust, dirt, and other contaminants, as well as water or other liquids that may spill onto the board.

Firstly, the bag prevents static electricity from damaging the board. Consider the static buildup that can occur when you walk around with your board.

The air around you can cause static electricity to build up on your body and the board. Touching surfaces and walking on certain surfaces can also cause static buildup.

With this in mind, it is best to avoid carrying your board unless you are installing it. Keep in mind that the dry air you encounter in cold weather can lead to greater static buildup.

The GE Generator Control Turbine Board DS200CVMAG1AEB is shipped to you with a wrist strap that allows static electricity to drain away from your body and the board.

One end of the wrist strap wraps around your wrist and the other end is used to clip onto a metal surface, such as the legs of a workbench.

Whilst the static sensitivity of such DS200CVMAG1AEB printed circuit boards and the specification of installation procedures are important.