The IC200MDL930 contact output is essentially a dry contact output. It requires an external supply voltage source to conduct the proper voltage to the connected electrical load.

It can be used for resistive or conductive loads, but it is recommended that conductive loads, external protection or suppression circuits (such as fuses) be installed.

Output contacts are rated at a minimum of 10mA per point; 2.0A for 5 to 265 VAC, max; 2.0A at 5 to 30 VDC, 0.2A at 31 to 125 VDC, max.

All current ratings are resistive load ratings. In addition, the nominal external supply voltage ratings for the contact outputs are 5/24/125 VDC and 120/240 VAC.

The IC200MDL930 has a maximum backplane current consumption of 245 mA when all outputs are energised.

The module is equipped with a separate channel indicator to describe the energised state of each output channel.

It also has a separate module OK LED indicator to indicate the active power received by the module from the backplane power supply.

The IC200MDL930 module is an 8-point output module manufactured by GE Fanuc. It is part of the Versamax family.

The output points of the module are individually isolated. The output module draws 245 mA of power from the baseboard with all outputs active.

The IC200MDL930 module is fully compatible with AC and DC loads. Each of the module’s eight points has its own LED indicating field power through those points.

The module contacts are closed by default during module activation. At this time the output bit is set to 1. The module is easy to install when using the rack mounting method on a baseboard.

The output module is certified to CE, cULus and other industry standards. It is used for global settings.

The IC200MDL930 output module is an intelligent device that performs faster processing than other similar modules.

This output module has no output leakage current. Each point relay is designed with a fixed coil and an armature.