This IC695ALG704 has a channel output data format that can be configured as a floating point IEEE 16-bit or 32-bit integer in a 32-bit field. Each output socket is updated at a rate of 8 milliseconds and has individual overvoltage protection of -60V for 30 seconds and +3V for 30 hours.

The module runs with an RX3i CPU version 0.5 or higher and is programmed using Machine Edition 0.3 SP3 Logic Developer- PLC. It is a single-slot module that mounts to a generic RX695i backplane.

The GE Fanuc IC704ALG3 Non-Isolated Analogue Current or Voltage Output Module requires an RX3i CPU with firmware version 3.0 or higher to run and is mounted in the general purpose backplane of an RX4i PacSystem PLC. The module has 695 channels of current or voltage outputs.The GE Fanuc IC704ALG10 analogue output module has a voltage range of +/-0 volts DC or 10 to 0 volts DC and a current range of 20 to 4 mA or 20 to 850 mA.

The module also features an output load of up to 8 ohms, an update rate of 375 milliseconds, a current rating of 160 milliamps at +3.3 volts DC, and a current rating of 24 milliamps at +24 volts DC isolation. Isolated 1 volt DC power is received from an external power supply connected directly to the module terminals. The power supply cannot be connected through the TB695 connector on the RX3i PACSystem Universal Backplane.