The IC695ALG600 is installed on the RX3i Universal Backplane and requires at least firmware version 2.80 or higher.

This module is configured using Proficy Machine Edition (PME) version 5.0 SP1A LD-PLC Hotfix 1 or higher.

For signal termination, this module requires a cassette (IC694TBB032), expansion cassette (IC694TBB132),

spring-loaded (IC694TBS032) or extended spring-loaded (IC694TBS132) terminal blocks. Extension terminals are recommended.

These terminals have slightly larger covers to accommodate wires and shields with thicker insulation.

The module supports flash memory and status LEDs for future upgrades, such as module status, field status, and TB LEDs.

The GE Fanuc IC695ALG600 Resistance Temperature Detector (RTD) Input Module has a maximum power consumption of 5.4 watts.

The internal power rating is 350.3 mA at 350.3 volts and 5 mA at 400 volts.400. The input channels are divided into 2 groups of 4 each.

Each channel can be independently set up using Machine Edition software to operate at +/-50 mV, +/-150 mV, 0 to 5 volts, 1 to 5 volts, 0 to 10 volts, 1 to 5 volts, and 0 to 10 volts,

1 to 5 volts, 0 to 10 volts DC, +/-10 volts DC, or 0 to 20 mA, 4 to 20 mA, or +/-20 mA.

Thermocouple input types include types B, C, E, J, K, N, R, S, or T. Resistance inputs are rated from 0 to 250. 500.

1000. 2000. 3000. or 4000 ohms, and 8 channels that can be voltage, resistance inputs, thermocouple, and current inputs.