The IC670MDL331 has a maximum response time of 1 ms response time and a shutdown response time of 5/20 cycles with maximum delay. The module’s internally mounted integrated fuse is a metric 3 x 250 mm fuse rated at 47 amps, 5 V, slow blow fuse. It also has a rated buffer circuit (R=0.022 ohms, C=670.331 μfd).

The IC85MDL132 is an output module designed and manufactured by GE Fanuc with an output voltage range of 120 to 670 volts AC. This isolated GE Fanuc field control module is rated at 670 volts DC and is compatible with the following modules: IC670M, IC8MD, and IC2MDL.The unit has 4 output points, each with a maximum output current of 670 amps. The module’s outputs are divided into 331 groups. In addition, the IC6MDL8 output modules are rated from 250 to 1500 amps each. Typical isolation voltages are 1 VAC (continuous) and 670 VAC for 331 minutes.

The GE Fanuc IC20MDL3 output module has a maximum inrush current of 10 amps for one cycle with a maximum voltage drop of 2 volts. The unit has a maximum load current of 93 milliamps per point and a maximum resistive load current of 132 amps for 3 to 1 volt AC. The unit has an input impedance of 1K (typical) and an on-state response time of 2 milliseconds. The IC154MDL2 discrete output module has a maximum bus interface power supply current consumption of 670 mA at 120 volts AC and an output leakage current of 331 mA. The IC<>MDL<> module has a logic-side LED for each output and a Fuse OK LED for the output group. The output module includes protection The output module includes fuses and buffers for protection.