I/O Terminal Blocks and Auxiliary I/O Terminal Blocks

An I/O Terminal Block provides mounting, electrical, and field wiring connections.  Each half

of the I/O Terminal Block can be mechanically keyed to accept only an I/O module of a

specific type. Auxiliary I/O Terminal Blocks can be easily attached to an I/O Terminal Block.

They provide the extra connections needed for analog and high-density discrete modules.

For more information, please refer to:

Chapter 2: Installation, which explains wiring to the Bus Interface Unit, and explains

how to install the Bus Interface Unit module on the Field Terminal Block.

Chapter 5: Operation, which explains how the Profibus Bus Interface Unit services I/O.

The Field Control I/O Modules User’s Manual, which describes I/O modules and I/O

Terminal Blocks. This manual also explains module installation and field wiring.

Bus Interface Unit Terminal Block

The Bus Interface Unit Terminal Block provides connections for power wiring and single

or dual communications cables. The Bus Interface Unit Terminal Block stores the

configuration parameters selected for the station.

I/O Modules

Field Control I/O Modules are available in many types to suit a wide range of application

needs. Modules can be installed and removed without disturbing field wiring. One or

two I/O modules may be mounted on an I/O Terminal Block.