Category: Industry Trends

Features

• Up to 32 LS-6XT controls are supported with up to 32 easYgen-3400XT/3500XT.

• Up to 64 LS-6XT are supported in one network with up to 16 GC-3400XT, each group

consisting up to 31 gensets.

• Purpose-built software to support single bus or redundant bus communications.

• Three independent true RMS AC measurement (system A, system B and auxiliary

voltage).

• Remotely selectable breaker transition modes: Open, Closed (short parallel

<100ms), Inter-change, Indefinite parallel.

• Internal power calculation with option to feed-in active power and reactive power

from external transducer.

• Phase match or slip frequency synchronization with voltage matching.

• Several built-in protection elements (including ROCOF, phase shift and flexible limits

for custom protection).

• Segment control for the load sharing.

• Automatic date and time synchronization between the LS-6XT units and the con

nected easYgen-3400XT/3500XT controls.

• Detailed interface communication diagnostics to monitor, visualize and troubleshoot

all the connected controls in the network.

• LS-6XT “Stand alone” mode without the easYgen-3400XT/3500XT is possible.

• Custom logic and configurable I/Os driven by LogicsManager and AnalogManger.

• HMI supported with RP-3000XT offering standard and customizable screens

• Ethernet interconnectivity and Modbus master functions for enhanced communication flexibility.

Description

Woodward’s easYgen | LS-6XT control is synchronizer controller with integrated mains

decoupling and protection features. It enables several redundant communication

schemes with peer controls. The applications range from independent synch check

relay to complex power management system with multiple utility feeds, bus tie break

ers and group breakers in combination with Woodward’s easYgen-3400XT/3500XT

equipped genset controllers and/or easYgen | GC-3400XT equipped genset groups. Re

dundant busses running among the peer controls ensure that availability of your power

generation asset is not compromised to a single point of failure.

The LS-6XT control together with easYgen-3000XT controls are designed to support

OEM switch-gear builders, generator packagers, and system integrators standardize on

a single hardware for a multitude of utility parallel or island operations. Off-the-shelf

LS-6XT control is software configurable for one/two breaker control, gensets / genset

groups handling, and stand-alone/multi-unit application.

The LS-6XT controller is available in a rugged aluminum powder coated housing. An

LED Annunciator plate is integrated to the front for local annunciation of alarms that

are customizable on-site. Woodward easYview visualization panels are supported over

a separate Ethernet network that works as remote operator control panel.

RELATED PRODUCTS

• Group Breaker Controller easYgen | GC-3000XT (Product Specification #37896)

• Excitation module for synchronous generators easYgen | exciter-10 (Product Specification #37909)

• Circuit Breaker Controller easYgen | LS-6XT, LS-511/521 & LS-512/LS-522 (Product Specification #37913.

#37522 and #37661/37663)

• Remote Panel RP-3000XT (Product Specification # 37592)

• ToolKit (Product Specification # 03366)

• I/O Expansion Board IKD1 (Product Specification # 37171): P/N 8440-2116

• Engine Speed Control actiVgen (Product Specification # 03419): P/N 8440-2100

• Load Share Gateway LSG (Product Specification # 37451)

• Electronic Pickup Unit EPU-100 (Product Specification # 37562)

• CANbus based Remote Annunciator (Product Specification # 37279): easYlite 100 P/N 8446-1023

• Power Generation Learning Module (Product Specification # 03412): P/N 8447-1012

• Data TelegramMapper software (Application Note # 37684)

• Profibus Gateway (Application Note # 37577): ESEPRO P/N 8445-1046

• Remote Access Gateway (with HMS Netbiter EasyConnect EC250 and EC350)

• Modbus master software (Application Note # B37919)

• HMI localization tool (Product Specification # B37918)

• Thermocouple Scanner (AXIOMATIC AXTC20)

• WAGO and Phoenix expansion CAN Couple

FEATURES

• Enables several power generation topologies. Some frequently used are:

• only with easYgen-3500XT: 32 gensets, one generator group breaker and one mains circuit breaker

• with easYgen-3500XT and LS-5: 32 gensets and 16 breakers (Tie/GGB/MCB) or 16 gensets and 32

breakers on CAN bus

• with easYgen-3500XT and LS-6XT:  32 gensets and 32 breakers (Tie/GGB/MCB) on single or redundant

Modbus/TCP

• with easYgen-3500XT and GC-3000XT: 496 gensets, one generator group breaker and one mains circuit breaker

• with easYgen-3500XT, LS-6XT and GC-3000XT: The control topology is cascaded in three layers. Layer

1 consists of easYgen (and also LS-6XT), Layer-2 group controls and Layer-3 LS-6XT. At Layer-1 total

496 gensets (16 x 31), at Layer-2 16 Group controllers and at Layer-3 64 LS-6XT on up to 128 segments

are supported. Communication between Layer-1 and Layer-2 controls is CAN, Ethernet A or hot redun

dant CAN/Ethernet A and between Layer-2 and Layer-3 controls is Ethernet B, Ethernet C or hot redun dant Eth B/Eth C.

• Run-up synchronization / Dead Field Paralleling to quickly get several synchronous generators onto the load

• Three-phase true RMS power sensing with Class I accuracy

• Operation modes: AUTO, STOP, MANUAL, and TEST – accessible through face plate or discrete input

• Breaker control: Slip frequency / phase matching synchronization, open / close control, breaker monitoring

• Load transfer: open / closed transition, interchange, soft loading / unloading, Utility parallel

• Load share and device to device communication over CAN, Ethernet or hot redundant ETH/ETH, CAN/ETH

• Remote control via interface (Modbus TCP, Modbus RTU) and via discrete/analog inputs for adjusting

speed, frequency, voltage, power, reactive power, and power factor set points

• Freely configurable PID controllers for various control purposes, such as heating circuit control (CHP applications), water level, fuel level, pres

sure and / or other process variables

• Direct support to several ECUs: Scania S6. MTU ADEC ECU7/8/9. Volvo EMS2 & EDC4. Deutz EMR2 & EMR3. MAN MFR / EDC7. SISU

EEM, Cummins and Woodward EGS02 ECU

• Modbus master and modbus data telegram mapper support with dedicated PC tools

• CAN J1939 support to exhaust gas after-treatment (DPF, SCR) triggered by global diesel emissions regulations

• „System Update“ function ensures every unit recognizes other units in the network and helps isolate root-cause quickly during troubleshooting

• Time / Date synchronization over Simple Network Time Protocol (SNTP)

• Cylinder head / exhaust temperature monitoring (Temperatures come from J1939 or CANopen devices)

• Woodward ToolKit™ software for flexible setup from a single connection to the network. The ToolKit can be accessed either via USB, or via

Ethernet, or via CAN ports.

• Multi-lingual capability: English, German, Spanish, French, Italian, Portuguese, Japanese, Chinese, Russian, Turkish, Polish, Slovakian, Finn

ish, Swedish and an empty slot for custom language via a dedicated MS Excel based PC tool

Targeted at enabling complex power management applications, the easYgen-3500XT supports easYgen | GC

3000XT to manage a large genset fleet of up to 496 sets and easYgen | LS-6XT to control up to 64 synchroniz

ing breaker or manual switches on up to 128 complex bus segments. Redundant load sharing is selectable us

ing Ethernet B and C networks for enhanced reliability. The control combines complete engine-generator con

trol and protection with advanced, peer-to-peer paralleling functionality and innovative features in a robust, at

tractive, user-friendly and all-in-one package. The easYgen-3500 XT controls are designed to direct connect up

to 690Vac and operate to 4000m above sea level without derating.

The easYgen-3500XT is available in two packages. P1. focused at complex paralleling applications provides

redundant Ethernet communication, LS-5 connectivity, and standard I/O set, while P2. Co-Gen/CHP model

offers expanded onboard I/O set, 3-ph busbar voltage measurement capability and phase rotation monitoring

between gen-busbar and busbar-utility. These packages are available without a display in a rugged metal hous

ing suitable for back panel installations (easYgen-3400XT-P1 and easYgen-3400XT-P2 respectively). A sophis

ticated touch screen remote panel (RP-3000XT) complements them as an operator control panel.

A version of easYgen-3500XT (easYgen-3500XT-P1-LT and easYgen-3500XT-P2-LT) is designed to operate

down to -400 C for outdoor applications.

Woodward raised the standard in genset paralleling control and power management system with the

easYgen 3000XT Series controllers. These controllers come with standardized software that is simple to

configure, yet easily customized for individual applications. Enhanced connectivity enables fast, reliable

and secure interfac ing to other controls and communications systems while the enhanced hardware is a

drop-in replacement for previous generation easYgen-3000 Series Controls.

Targeted at enabling complex power management applications, the easYgen-3500XT supports easYgen |

GC 3000XT to manage a large genset fleet of up to 496 sets and easYgen | LS-6XT to control up to 64

synchronizing breaker or manual switches on up to 128 complex bus segments. Redundant load sharing

is selectable using Ethernet B and C networks for enhanced reliability. The control combines complete

engine-generator control and protection with advanced, peer-to-peer paralleling functionality and

innovative features in a robust, at tractive, user-friendly and all-in-one package. The easYgen-3500 XT

controls are designed to direct connect up to 690Vac and operate to 4000m above sea level without

derating.

New Features

✓ Built-In Redundant Ethernet

✓ Power Measurement Class 1

✓ Direct Connect Up to 690 VAC

✓ AnalogManager & Editable Screens

✓ Multi-Interface ToolKit connectivity

✓ Face plate with tactile buttons

✓ Drop-In replacement

• Premium genset control for complex paralleling applications of up to 32 gensets in

• Prime Power & Cogeneration (CHP)

• Peak shaving operation

• Emergency operation

• Import/Export operation

• Islanded & Utility parallel operation

• Group controller and LS 6XT support to manage large fleet of gensets and circuit breakers

• Run-Up Synchronization

• Built-in active voltage regulation

• Complete engine, generator and utility protection

• Up to 9 communication ports: 3xEthernet, 3xCAN (CANOpen and J1939), RS-485. USB, Interface

expansion card

• Customizable logic, HMI screens, and alarms

• Dedicated low temperature display variants

• UL 61010. UL 6200. CSA, RoHS 2. and marine (ABS, LR) compliance