Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Category: Industry Trends

Home / Industry Trends (Page 262)
March 19, 2025 BY
IN A-B

A-B 1336E-B030-AN-EN-GM1-HA2-L7E Adjustable Frequency Inverter

About the 1336E-B030-AN-EN-GM1-HA2-L7E

The 30 hp 1336E-B030-AN-EN-GM1-HA2-L7E drive is an Allen-Bradley AC drive that is part of the Allen-Bladley 1336 IMPACT product family.

For the Rack C 1336E-B030-AN-EN-GM1-HA2-L7E drive, the outputs and inputs are connected to TB1. which is the 11-position terminal block on the gate drive board.

National wiring codes should be considered during wiring to minimize the risk of injury and equipment damage.

The drive control interface supports TTL dcs-sis.com contacts. Encoder feedback is also provided on the drive.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive is available with an output power of 22 kW or 30 hp at 380 to 480 volts AC input voltage.

Output current and apparent power ratings are 48.2 amps and 38 kVA, respectively.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive draws 49 amps and 32 to 41 kVA at the input.

The input and output frequency ranges are 47 to 63 Hz and 0 to 250 Hz, respectively.

The driver output is capable of sustaining 100% of the rated current continuously or 150% of the rated current for up to 1 minute.

The maximum short circuit rating is 200.000 amps RMS symmetrical. The HMI is part of the standard driver package, which includes the controller and programmer.

Digital potentiometers are also available on the driver. The drive has an English language module. For network communications, the drive has a single point remote I/O interface.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive is an open drive with an IP00 enclosure.

The recommended operating ambient temperature range is 32 to 122 degrees Fahrenheit. The drive has a shipping weight of 38.6 kg.

The dimensions of the drive rack are 701 x 301.8 x 225.0 mm.

1336E-B030-AN-EN-GM1-HA2-L7E Technical Description

This 1336 PLUS II Adjustable Frequency AC Drive is a 380-480 VAC unit with 22 (30) kilowatts (horsepower) and has a(n) open (IP00) enclosure.
March 17, 2025 BY
IN GE

VMIVME-3122 High Performance 16-bit Analog-to-Digital Converter Boards

The following overview of key features illustrates the flexibility and performance of the VMIVME-3122:

– 16. 32. or 64 differential or single-ended analog inputs

– 16-bit A/D conversion

– Selectable sweep rates from 381 Hz to 100 kHz (high performance option), 381 Hz to 50 kHz (standard performance option)

– Programmable gain of x1 or x10

– A/D converter ranges of ±2.5 V, ±5 V, ±10 V, 0 to +5 V, 0 to +10 V

– Programmable channel gain

– 16- to 1.024-word dual-port data buffer

– Operates in short I/O (A16), standard (A24), or extended (A32) data spaces

– Programmable channel block size and buffer size

– Optional low-pass input filter

– Continuous and burst operation modes

– Free-run or external/internal trigger

– Bus interrupter for mid-scan or end-scan indication

– Programmable interval timer for timing data bursts

– Direct wiring from VMIC signal conditioning boards

– Initialized after reset in Auto Scan mode, gain = x1

Functional Description

The VMIVME-3122 is a high-resolution, 16-bit, 64-channel analog scan and digitizing input board for VMEbus system applications.

Dual-port data memory, on-board timers, automatic gain control, and programmable bus interrupters enable the VMIVME-3122 to support large amounts of analog input traffic with minimal host processor involvement.

Analog inputs are scanned and digitized sequentially. Digital values are stored in dual-port data buffers that are readily accessible from the VME bus.

The gain of each channel can be programmed individually or set by software to a fixed gain common to all channels. Channel gains are software selectable to x1 or x10.

The A/D converter voltage ranges are jumper-selectable to ±2.5 V, ±5 V, ±10 V, 0 to 5 V, and 0 to 10 V. The A/D converter voltage ranges can be set to ±1 or x10 by software.

Upon system or program reset, the board will initialize in 64-channel auto-scan mode at 100 KHz with all channel gains initialized to 1 (x1).

After the reset operation, the program can dcs-sis.com select timed burst or triggered burst mode and modify the block size, buffer size, and channel gains as desired.

The channel block can be adjusted to 1. 8. 16. 32. or 64 channels, and the data buffer size can be selected from 16 to 1.000 channels.

The data buffer size is selectable from 16 to 1.024 data words in binary increments.

In standard performance mode, the board must be reprogrammed after a reset to obtain a 50 kHz scan rate. The value of $00F7 must be written to relative address $0006.

Timed Data Bursts are controlled by an interval timer that provides repeat or single burst intervals of up to 687 seconds.

A burst can contain from 8 to 1.024 channel samples. A data ready flag can be used in the middle or at the end of a scan, and an interrupt request can be generated at the same time as the flag.

An interrupt can also be initiated after a specific number of samples have been acquired.
March 17, 2025 BY
IN GE

Fanuc VMIPCI-5565 Ultra High Speed Fiber Optic Reflective Memory

Functional Features

– High-speed, easy-to-use fiber optic network (serial rate of 2.12 Gbaud)

– Data written to the memory of one node is also written to the memory of all nodes on the network

– Up to 256 nodes

– Connections up to 300 meters to multimode fiber and up to 10 kilometers to single-mode fiber

– Dynamic packet size, 4 to 64 bytes of data

– Transfer rates 47.1MB/sec (4-byte packets) to 174MB/sec (64-byte packets)

– 64MB or 128MB SDRAM Reflective memory

– Two independent DMA channels

– Any node on the network can generate an interrupt in any other node on the network or in all network nodes with a single command

– Error Detection

– Redundant transfer mode for additional error suppression

– No processor overhead

– Processor is not involved in network operation

– PCI 64-bit 66MHz Transport

– Compliant with PCI Revision 2.2

– Includes VMISFT-RFM2g network and shared memory drivers.

Features

Description: The VMIPCI-5565 is the PCI member of the dcs-sis.com VMIxxx-5565 family of reflective memory (RFM) real-time networking products from GE Fanuc Embedded Systems.

Other members of this family include the VME-compatible board VMIVME-5565 and the PCI mezzanine card (PMC) VMIPMC-5565.

All three products are network compatible and can be integrated into a network in any combination.

This family of products allows computers, workstations, programmable logic controllers (PLCs) and other embedded controllers with different operating systems or no operating system at all to share data in real time.

Reflective Memory boards are like shared memory for local nodes.

Any level of software, including the application program itself, can write to or read from the memory.

Data written to one node’s Reflective Memory is transferred by the network hardware to all other nodes and placed in the same addresses on those nodes’ Reflective Memory boards.

This data transfer does not require the involvement of a processor on any node. With this system, all nodes on the network have a local copy of the shared data that is immediately accessible.
March 17, 2025 BY
IN GE

VMIVME-2127 128-bit Voltage Source Digital Output Board with Built-in Test Support

Functional Features

– 128-bit voltage output

– High current driver (350 mA current source)

– Heavy duty options available

– Automatic overcurrent shutdown protection

– Thermal shutdown protection

– Output fault indication provided in status register

– High breakdown voltage (35 V)

– Output clamp diode for inductive flyback protection

– Compatible with intelligent I/O controllers

– Built-in test logic for fault isolation

– Compatible with VME bus (ANSI/IEEE STD 1014-1987 IEC 821 and 297)

– A24:A16:D32/D16/D08 (EO): Slave 39/3D:29/2D:6U Form Factor

– Front Panel with Fault LED

– Preheat resistor sockets available, to be supplied by the user

– External power supply can be connected on the front panel (P3 to P4) or on P2.

Compliance: This product complies with the VMEbus specification (ANSI/IEEE STD 1014-1987 IEC 821 and 297) and uses the following mnemonics: A24:A16: D32/D16/D08 (EO): Slave: 39/3D:29/2D:6U form factor

Output Connector Types: Three types of female dcs-sis.com mating connectors are available for use with the P3 and P4 interfaces: 96-pin mass termination (IDC) connectors, 64-pin IDC connectors, and 96-pin discrete wire connectors.

Part numbers for ERNI IDC DIN 96-pin and 0.033-inch 30 AWG ribbon cable are

96-pin connector 913 031 (ERNI)

96-pin cable 913 049 (ERNI)

Part numbers for Panduit IDC DIN 64-pin connectors and 0.050-inch ribbon cable are

64-pin connector 120-964-435E (Panduit)

Strain Relief 100-000-032 (Panduit)

64-conductor cable 9V28064-XXX (Belden)

Harting discrete wire connectors consist of a contact housing with female crimp contacts.

Housing with female crimp contacts Harting part numbers are as follows

96-pin connector 09 03 096 3214 (Harting)

Female crimp 09 02 000 8484 (Harting)` Contacts
March 17, 2025 BY
IN Prosoft

Prosoft ILX56-MM inRAx® Message Manager for Industrial Communications

ProSoft Technology® inRAx® Message Manager is a single-slot solution that

Connects and transfers plant and factory process automation monitoring and control data between automation islands of different platforms, networks and protocols.

The inRAx Message Manager is an easy-to-use data transfer engine for the ControlLogix™ 1756 platform.

Supports Rockwell Automation® Programmable Logic Controller (PLC) and Programmable Automation Controller (PAC) network protocols.

as well as platforms and devices using Siemens Industrial Ethernet and Modbus TCP/IP protocols.

The ILX56-MM helps system integrators and end-users reduce the engineering effort required to coordinate data transfer between multiple control systems in factory and plant automation applications.

The Message Manager enables PLC/PAC data exchange without the need for additional PLC programming for specific messages, simplifying and streamlining data connection and transfer operations.

Functional Advantages 

Licensed Backplane Technology 

Manufactured under license by Rockwell Automation 

High-speed data transfer between modules and processors 

Performs PLC/PAC data transfers

 Eliminates the need to program PLC/PAC messages 

Built-in network configuration tool 

No software to purchase, install or maintain Easy-to-use interface 

Two built-in Ethernet ports 

Connects to Modbus TCP/IP and Siemens Industrial Ethernet 

Backed by ProSoft technology 

20 years of commitment to providing you with high-quality, reliable solutions 

Free, unlimited worldwide technical support available by phone at any time for pre-sales, setup or troubleshooting support to help you get up and running faster and stay up and running longer.

Three-year warranty to ensure reliability and prevent equipment failure 

Free ProSoft software tools tightly integrated with our hardware …… A quick and easy total solution to help you adapt our products to your application.

Configuration 

Message Manager is both a communications interface dcs-sis.com and a message transaction engine. Easy-to-use configuration tools are web-based and built into the module for module and network configuration, diagnostics, and upload/download.

Module for module and network configuration, diagnostics and uploads/downloads. telegram programming is no longer required for PLC to PLC data transfers.

These transfer setups can be accomplished in one location with up to 16 controllers, including a variety of networked Rockwell Automation controllers and PLCs/PACs located on Modbus TCP/IP or Siemens Industrial Ethernet networks.

General Specifications 

– Built-in web-based configuration tool 

– Requires Internet Explorer 7 for full operation 

– Single slot – 1756 backplane compatible 

– Remove and insert under power – RIUP 

– Local or remote rack 

– Status and diagnostics scrolling display
March 17, 2025 BY
IN A-B

A-B Stratix 5800 High Performance Managed Switch

The Allen-Bradley® Stratix® 5800 managed industrial Ethernet switch delivers Gigabit performance in a flexible package.

Its fixed and modular design supports a variety of copper, fiber, and PoE expansion modules, and offers Layer 2 switching or Layer 3 routing firmware options to meet a variety of application needs.

When used as a Layer 2 switch, the Stratix 5800 is ideal for high-performance end devices.

When used as a Layer 3 switch, routing dcs-sis.com can be enabled between segmented networks to improve performance and prevent unwanted network traffic.

Network segmentation helps simplify security management by establishing trust domains and improving efficiency.

The Stratix 5800 includes a robust set of switching, routing, and security features to support a wide range of architectures and uses the Cisco IOS-XE operating system to optimize compatibility with enterprise environments.

Choosing a switch co-developed by Rockwell Automation and Cisco allows your operations technology (OT) and information technology (IT) professionals to leverage the tools and techniques they are familiar with.

By helping to provide optimized integration, you can experience easier commissioning and actionable diagnostics.

Features and Benefits

– Full Gigabit switch platform High-performance networking support

– Fixed and modular options with up to 26 ports for flexibility and scalability

– Multiple copper, fiber and PoE options to support a variety of applications

– Supports Layer 2 access switching and Layer 3 routing for use in multi-tier architectures

– Supports IT and OT configuration and management tools, enabling users to leverage the expertise of both teams

– Provides default configurations for industrial applications for easy setup and optimized performance

– IEC 62443-4-2 certified for compliance with global cybersecurity standards

Optimized integration

– Studio 5000® Add-On Profiles (AOPs) enable optimal integration with Rockwell Automation® Integrated Architecture® systems.

Integration into Rockwell Automation® Integrated Architecture® Systems

– Predefined named Logix tags for monitoring and port control

– FactoryTalk® View panel for status monitoring and alarming

– Embedded Cisco® technology, including the IOS-XE operating system, facilitates secure integration with corporate networks
March 17, 2025 BY
IN Vibro-Meter

Vibro-Meter RLC16 Relay card Relay card

Features

” From the Vibro-Meter® product family

” Relay card with screw terminal block

” 16 relays with changeover contacts

” Relay-driven inverted logic (jumper selectable)

” Low contact resistance

” Low capacitance

” High throughput power

” Real-time board insertion and removal (hot-swappable)

” EU EMC compliance

Description of the RLC16 Relay Card

The RLC16 relay card is designed for use in dcs-sis.com Meggitt Sensing Systems’ VM600 Series Vibrometer® product line for mechanical protection systems as well as condition and performance monitoring systems.

It is an optional card for use when the four relays on the IOC4T I/O card are insufficient for the application and additional relays are required.

The RLC16 is mounted on the rear of the VM600 (ABE04x) rack and connects directly to the rack backplane via a connector.

The RLC16 contains 16 relays with changeover contacts. Each relay is associated with 3 terminals on the screw terminal strip at the rear of the VM600 rack.

The relays are controlled by software-controlled open collector actuators.Jumpers on the RLC16 card allow selection of either Normal Energized (NE) or Normal De-energized (NDE) relays.

Relay Characteristics

Relay Name: RL1 to RL16

Type: PE014005

Contact Arrangement: 1 COM, 1 NC, and 1 NO contact/relay.

All relay contacts are on J1. J2 and J3.

Rated voltage: 250 VAC

Current Rating: 5 AAC

Maximum breaking capacity (no contact protection): 1250 VA
March 17, 2025 BY
IN ABB

Let’s Get Connected ABB Network Communication Adapter FCAN-01

Network adapter modules are flexible plug-in adapters that provide quick and easy universal connectivity to all major controllers.

Universal connectivity means that ABB low voltage inverters can be connected to virtually any brand of controller and communications network, enabling users to choose the best network for their needs.

Users can choose the best network to meet their needs.

The product’s network connectivity provides a simplified interface for drive control and management, improving quality, productivity, flexibility and scalability.

Communication networks also reduce wiring costs compared to traditional I/O connections.

traditional I/O connections.

Combining these feature-rich adapter modules with ABB inverters can provide a solution for applications focused on food and beverage, material handling, printing,

rubber-plastics and textile industries OEMs and system dcs-sis.com integrators with powerful inverter solutions.

Advantages of network connectivity

– Reduced mechanical and electrical installation time

– Reduced downtime

– More data at a lower cost

– Reduced time and cost for machine expansion or relocation

– Remote data access

– Diagnostics provide predictive fault warnings

– Open protocol to interface with any major PLC

– PC tool communication through installed PLC networks

Benefits of ABB Network Connectivity

– Connects to virtually any automation architecture

– Fast and simple connection

– Products designed and tested to comply with the protocol

Testing

– First-class support resources

– FENA-21 and FEIP-21 support DLR (Device Level Ring)

End-user benefits

– Lower mechanical and electrical installation costs

– Reduced downtime

– Increased productivity

– Lower start-up costs

– Lower maintenance and diagnostic costs

– Quick access to networked hard disks via PC-based startup and maintenance software tools
March 17, 2025 BY
IN A-B

A-B High Performance Kinetix 5700 Servo Drives

OVERVIEW

High-performance Kinetix 5700 servo drives help meet the demands of demanding applications in a wide range of industries.

These multi-axis servo drives combine high-performance servo and vector motor control to help simplify machine design and reduce the time and labor costs required for integration.

Kinetix 5700 servo drives can be configured with integrated drive safety and regenerative bus power to help make your next servo solution safer and more energy efficient than ever.

Functional Features

Kinetix 5700 Servo Drive

Delivers high power density in a compact rack size

Offers a wide power range of 1.6…. .112 kW wide power range

Supports servo and induction motors with a wide range of feedback types

Features a dual-axis module

Innovative snap-in bus system for easy assembly and installation

Supports single-cable solutions for motor power and feedback

Includes dual Ethernet ports to support linear and dcs-sis.com device level ring (DLR) topologies

CIP security features support defense-in-depth approach to network security

Kinetix 5700 Integrated Safety Servo Drive

Includes integrated or hard-wired safety options

Integrated safety option reduces overall system wiring

Advanced safety features with Safe Torque Off, Safe Stop and Safe Monitor functions

Kinetix 5700 Regenerative Bus Power

Helps reduce overall energy consumption by regenerating excess energy

Performs common DC bus voltage regulation over the entire AC input voltage range

On-board diagnostics for power quality monitoring provide real-time analysis via EtherNet/IP

Integrated LC filter reduces installation costs and cabinet space

Tuning-free setup and operation

Real-time Load Observer tuning technology automatically tunes each axis, compensates for unknown mechanical structures, and adjusts for applications with changing inertia during operation

Virtual torque sensing helps detect anomalies and provides analysis

Reduces resonance through adaptive tuning using multiple tracking trap filters
March 17, 2025 BY
IN A-B

A-B 2198-S160-ERS3 Single Axis Inverter Module

About the 2198-S160-ERS3

The 2198-S160-ERS3 Kinetix 5700 Single-Axis Inverter Module is a single-axis inverter used by Allen-Bradley in many integrated motion control applications.

The inverter has a 400 Hz/100 Hz loop bandwidth, a 4 KHz control (PWM) frequency, and an output power supply of 85 ARMS.

120.2 A (0-pk) and a maximum of 160 ARMs, 226.2 A (0-pk).

The 2198-S160-ERS3 has a three-phase dcs-sis.com power output of 60.1 KW, an internal capacitance of 1120 μF, and requires 92.3 A DC input current at 458-747 V DC.

When the servomotor connected to the inverter does not have a holding option, the inverter has a control current of 4.6A at 24V DC supply.

The inverter also has a control current of 9.6A at 24V DC if the servomotor has braking enabled,.

And the inverter will receive 4A inrush current under 24V DC.

The 2198-S160-ERS3 has an operating heat sink relative to the percentage of rated output power of the inverter of

270W at 20%, 420W at 40%, 570W at 60%, 760W at 80%, and 950W at 100% of utilized output power.

Motor feedback and auxiliary feedback are provided via a 15-pin universal feedback connector (UFB) and a 2-pin motor feedback connector (MF).

and is pre-installed with an EtherNet network connection port.

The 2198-S160-ERS3 has an operating temperature range of 0-50°C (32-122°F), a non-condensing relative humidity of 5-95%, and a storage range of -40-70°C (-40-158°F).

It has a mounting height of 1500 meters (4921 feet), is not rated, and can withstand 15G operational shock and 2G vibration from 55-500Hz.

It is c-UL, CE, KC, c-TICK, ODVA, and OSHA certified and has an IP20 protected enclosure.

The 2198-S160-ERS3 weighs approximately 6.8Kg (15 lbs) and measures approximately 252mm x 478mm x 100mm (9.92″ x 18.82″ x 3.94″).

Menu

Search for products

Back to Top
Product has been added to your cart