Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Category: Industry Trends

Home / Industry Trends (Page 155)
March 21, 2025 BY
IN ABB

ABB EMB01S-XIO Evolution Module Base

The EMB01S-EMR Evolution Module Base mounts an AI12e, AO02e, DI06e, or DO01e I/O module to the EMC-_B0x Evolution Mounting Base.

or DO01e I/O modules to the EMC-_B0x Evolution mounting base.

The base connects the I/O module to the HN800 I/O bus and connects the I/O cable to the field terminal.

The chassis supports all functions of the AI12e, AO02e, DI06e, or DO01e I/O modules. This includes optional module redundancy.

Features and Benefits

Mounts AI12e, AO02e, DI06e, or DO01e I/O modules to the EMC-_B0x Evolution mounting base

Connecting I/O modules to the redundant HN800 I/O bus

Connect I/O module to NTDI0x TU via NKTU01 cable

Connect I/O module to NIDI01 TM via NKTU02 or NKTM01 cable

General information

Article number 7PAA005096R1 (EMB01S-XIO)

Lifecycle status active

Line redundancy yes

Channel 14. 15 or 16

Hot Swap No

Supported IO modules AI12e, AO02e, DI06e, DO01e

Single or redundant Single

Form Factor EMC-_B0_ Evolution Mounting Chassis

Mounting EMC-DB01. EMC-DB02. EMC-SB01. EMC-SB02

HN800 Bus length 190 mm

MTBF (per MIL-HDBK-217-FN2) PR E: 245.577 hours @ 30˚C, 244.473 hours @ 40˚C, 240.272 hours @ 70˚C

MTTR (hours) 8 hours

Power overvoltage category 1. Tested according dcs-sis.com to IEC/EN 61010-1

Process Signal Connections Thirteen (13) total: 4-AI, 2-AO, 3-DI, 4-DO

Field power connections @ I/O terminals (TU or TM)

Field power fuse @ I/O terminals (TU or TM)

Signal connection Terminable block on NTDI0x, NIDI01 or HDIOT-XIO-01

Maximum current 250 mA

Galvanic isolation test voltage 1500 V for up to 1 minute
March 21, 2025 BY
IN Emerson

Emerson DeltaV™ VerticalPlus Input/Output Subsystem Carrier

Functional features:

Designed for SIS

Modular design for flexible installation

Allows for online expansion

Increased I/O density

I/O density for cabinet-mounted systems

Introduction to the DeltaV™ VerticalPlus I/O Rack

Keep your I/O subsystems running efficiently with DeltaV™ VerticalPlus I/O Racks.

The VerticalPlus platform allows you to integrate DeltaV SIS logic solvers vertically, giving you the flexibility you need for cabinet design.

Power supplies/controllers and I/O carriers are modular.

You buy only what you need, but rest assured that as your dcs-sis.com system grows, you can add plug-and-play carriers-it’s easy!

The Advantage

Designed specifically for SIS. The redesigned carrier supports simplex and redundant SLS modules.

These modules communicate via a redundant safety bus, which is separate from the BPCS communications.

The VerticalPlus carrier also communicates with other SIS nodes on the vertical and horizontal carriers via redundant SISNet repeaters.

The modular design allows for flexible installation. A single T-shaped DIN rail is all that is needed to mount the power/controller carrier in place.

Fieldbus power is now independent for each individual card.

The modular design approach of the DeltaV system allows you to add I/O carriers as needed.

Allows you to expand online. Additional carriers can be added online as needed.

Increases the density of the cabinet-mounted system. Six I/O carriers can be mounted on one side of a standard 1200mm x 600mm x 2200mm cabinet.
March 21, 2025 BY
IN Foxboro

FOXBORO IDP10 I/A Series® Electronic Differential Pressure Transmitter

The Foxboro® brand Model IDP10 is an analogue output, two-wire d/p Cell® transmitter.

It provides accurate, reliable differential pressure measurement and transmits a 4 to 20 mA analogue output signal.

High Reliability and Value

 is available in conventional or low-profile construction.

 Excellent performance and long-term stability based on microprocessor technology.

 Industry-standard 316L ss, Co-Ni-Cr, nickel alloy(1), monel alloy, or tantalum sensor materials, depending on transmitter construction.

 Available in durable aluminium or 316 SS housings; both meet NEMA 4X and IP66 ratings.

 Optional mounting bracket kits are available for duct, surface, or manifold mounting of the transmitter.

 Dual seal certified to ANSI/ISA 12.27.01-2003.

 CE marked; complies with applicable EMC, ATEX, and PED European directives.

 Designed for hazardous area installations. Versions are available to meet organisational explosion-proofing and zoning requirements.

 Standard 5-year warranty.

Affordable Smart Transmitter Features

When you need the flexibility and performance of a configurable dcs-sis.com smart transmitter, but don’t need a digital output signal, these transmitters offer excellent benefits at a very affordable price:

 Liquid crystal display (LCD) digital indicator with on-board pushbuttons

 Pushbutton configuration and calibration

– Linear or square root output

– Adjustable damping

– Forward or reverse output

– Fail-safe outputs; scale up or scale down

– Rearrange without applying pressure

 can be easily upgraded to a fully intelligent version (FoxCom™, HART® or FOUNDATION™ fieldbus)

I/A SERIES PRESSURE TRANSMITTERS The I/A Series pressure transmitter family includes d/p Cell, Gauge, Absolute, Multi-Range, Multi-Variable, and High Performance transmitters, as well as pressure seals with remote or direct connection.

and transmitters with remote or directly connected pressure seals, all featuring field-proven silicon strain gauge sensors and universal topside construction.
March 21, 2025 BY
IN ABB

ABB REF 542plus Multifunctional Protection and Switching Controls

Configuration

Each protection and control application can be easily configured via the software function module, which allows the following functions to be arbitrarily defined as part of the secondary system:

LEDs for local indication (meaning and colour)

Single line diagrams showing the status of switching devices

Protection programme

Control programmes

Interlocking programmes

Automation sequences

All functions of the switchboard can be specified in co-operation dcs-sis.com with ABB. The configuration results are saved and delivered to the user together with the switchboard.

By using the “Function Block” programming language (FUPLA), the REF542plus multifunctional protection and switchboard control unit provides engineers, in

especially non-software specialists, the opportunity to easily update switchboard operation and handling.

With the REF542plus, users can fully integrate secondary systems into a true programmable controller.

This flexibility is very favourable for defining control functions for automation sequences.

This can include, for example, interlocking of switchgear, preventing the release of specific protective functions and initiating switching sequences.

The REF542plus multifunction unit offers a wide range of logic functions so that the various required control schemes can be configured.

The required control schemes are configured. The range of logic functions includes

AND logic gates

NAND logic gates

OR logic gates

NOR gates

XOR gates

Bistable and Monostable Flip-Flops

Bistable and Monostable Flip-Flops

Timers

Pulse Generator

Memory

Similar to the free definition of control schemes, each required protection scheme can be configured by combining the available protection function modules.

For example, the following protection functions are available:

Timed overcurrent protection

Inverse time overcurrent protection

Directional overcurrent protection

Undervoltage or overvoltage protection

Distance protection

Transformer and motor differential protection

Cable, transformer and motor thermal protection

Reverse power protection

Synchronisation check
March 21, 2025 BY
IN Emerson

Emerson AMS 6500 Protection Monitor Configuration

Pre-configured user-selectable measurement types simplify software configuration

Password protection with 4 user login levels and customisable access rights

Context-sensitive help information to quickly resolve set-up issues

Includes trending, time functions, order analyses and start/stop data for comprehensive setup.

Configuration includes setup of basic predictive functions, including troubleshooting and diagnostics

Applications

The AMS 6500 Configuration Software for Machinery Protection allows you to configure protection modules, view real-time vibration monitoring systems and sensor health.

The intuitive configuration process begins with the selection of the card type. Next, the configuration software displays a simple table view.

All configuration settings are clearly visible. Tabs help you categorise information between inputs, outputs, advanced machine diagnostics and management tasks.

diagnostic and management tasks. The allowable range for each required entry is clearly visible to help you understand the range of the parameter.

Preset parameters are automatically loaded when using Emerson sensors and transducers.

Real-time data can be displayed during system configuration to verify that wiring, card settings, and instrumentation are healthy and properly connected.

Real-time information such as gap voltage, waveform data, dcs-sis.com and overall vibration data can be viewed.

Ongoing maintenance functions such as resetting latching relays or loading saved configurations can be easily performed via software.

The software can be run on a PC or laptop.

The System Configuration Software allows you to configure the following monitors of the A6000 series

The following monitors of the A6000 series can be configured:

a6110. a6120. a6125. a6140. a6150. a6151. a6210. a6220. a6310. a6312. a6312-8.

a6410. a6620. a6630. a6740.a6740-10. a6824. a6824r
March 21, 2025 BY
IN Emerson

Emerson AMS 2140 Mechanical Health™ Analyser

Designed for you

Four-channel data collection makes bearing analysis easier and faster

Better understanding of shaft motion and machine transients with four-channel diagnostics

Longer battery life for a full shift (or more) without recharging

Full-colour touchscreen for easy navigation and detailed fault analysis, even when wearing gloves

Large screen automatically adjusts to ambient light so you can see what you need to see, wherever you are

Slim housing for comfortable one-handed operation

Fastest data acquisition speed on the market, so you spend less time in harsh environments

Advanced analysis tools, including cross-channel and transient analysis, help identify root causes

Comfortable shoulder strap and built-in stand make the analyser easy to use

Bluetooth wireless communication with headset for ease of use

Predictive diagnostics help you determine the root cause of equipment problems

Versatile advanced diagnostics improve machine health

The AMS 2140 offers the industry’s most complete set of features to quickly and accurately assess the health of rotating machinery.

Even the most complex machinery in your facility. With the AMS 2140

You can perform single-, dual-, or quad-channel vibration analysis, cross-channel analysis, transient analysis, structural analysis, balancing, and motor monitoring.

The analyser’s embedded intelligence guides you through advanced diagnostic tools, providing pre-configured menus and preset technology settings.

Troubleshooting documentation in the AMS 2140 helps dcs-sis.com with initial analysis, and AMS Suite integrates with the analyser for more in-depth analysis of data.

Take only one tool to the field

When you head out to the field on a collection mission, you don’t want to have to carry multiple tools.

The AMS 2140 provides you with a single platform that enables you to perform a wide range of machine health tests.

Balancing, temperature trending, and motor diagnostic functions coexist with vibration analysis tools.

Data from all of these tests is loaded into a database that allows you to trend the data from the various tests.

This gives you a more complete picture of the machine’s condition and predicts when corrective maintenance is required.

The AMS 2140 is suitable for a wide range of rotating equipment, including variable speed machines, complex gearboxes, low speed equipment, turbomachinery, sleeve bearings, gearboxes, and more.

equipment, turbomachinery, sleeve bearing machinery and reciprocating compressors.
March 21, 2025 BY
IN Emerson

Emerson DeltaV™ Smart Switches Plug and Play Industrial Switches

DeltaV™ switches are plug-and-play industrial switches with enhanced security features

New and improved hardware and software platforms with increased focus on security and improved performance

Fully managed by the DeltaV™ system

Automatically reports network alarms and diagnostic information to DeltaV workstations

Can be installed on the network between DeltaV workstations and Emerson’s Intelligent Firewall (DeltaV 2.5 network)

Plug-and-play installation

Automatic security lockout

Full range of industrial-grade fanless switches

Fully supported by Emerson

Benefits

Enhanced security. The new generation of DeltaV Smart Switches is based on a more powerful hardware and software platform with an increased focus on security.

The new hardware features powerful CPUs for control plane and management operations.

The software has many new features such as role-based access, secure user and password management, brute force attack protection, audit trails and user-readable event logs.

There is also a new HTML5 web interface that can be accessed through the Network Device Command Centre, making it easy to upgrade the switch software.

The next-generation switch also offers more flexible configuration options.

Improved performance. The switching ASICs used in these new products offer new capabilities

such as increased network buffers, the ability to process/forward/filter packets based on more L2 address information such as IP addresses, UDP or TCP ports, and a non-blocking architecture.

and non-blocking architecture, in addition to more powerful CPUs for control plane and management operations.

Fully managed by DeltaV. The DeltaV Switch Commissioning application automatically discovers the switch in the Network Device Command Centre (formerly the Smart Switch Command Centre) when the switch is started.

Network addresses are automatically assigned by DeltaV DCS or by the user when installed in a DeltaV 2.5 network (new in DeltaV v13.3).

Simply provide the switch name and dcs-sis.com description and select a few setup parameters and the switch will begin reporting. A serial connection is no longer required to configure the switch.

Automatic reporting of network alarms and diagnostics to DeltaV workstations. Operators and maintenance stations will automatically receive device alerts that indicate abnormal network communications.

The DeltaV Network Device Command Centre application provides an interface for diagnosing and troubleshooting network problems. All of this is built-in, eliminating the need for third-party applications for network monitoring.
March 21, 2025 BY
IN A-B

A-B 1444-DYN04-01RA Measuring Module

Description:

The Allen Bradley 1444-DYN04-01RA module is part of the Allen-Bradley Dynamax family of intelligent I/O modules.

It is designed to provide the integrated and distributed solution needed to monitor and control critical industrial machinery.

The 1444-DYN04-01RA module monitors and protects pumps, motors, gearboxes, fans, gas and steam turbines, high-speed compressors, and other reciprocating or rotating machines.

About 1444-DYN04-01RA

The Allen-Bradley 1444-DYN04-01RA module is part of the Allen-Bradley Dynamax family of intelligent I/O modules.

It is used to provide the integrated and distributed solution dcs-sis.com needed to monitor and control critical machinery.

The 1444-DYN04-01RA module monitors and protects pumps, motors, gearboxes, fans, gas and steam turbines,

high-speed compressors, and other reciprocating or rotating machines. In addition to this, the 1444-DYN04-01RA module measures strain or pressure,

In addition, the 1444-DYN04-01RA module can also measure dynamic signals such as strain or pressure, vibration, and position measurement signals such as rod position, differential expansion or thrust.

The 1444-DYN04-01RA module allows real-time measurements to protect machinery from imminent failure.

In addition, the measurement results can be further processed to calculate the acute fault indication parameters required to assess the current and predicted health of the machine.

The 1444-DYN04-01RA module can be managed and configured via a Logix controller and connected via an EtherNet/IP industrial network.

As with the rest of the Allen-Bradley/Rockwell Automation Integrated Architecture system, the

As with other parts of the Allen-Bradley/Rockwell Automation Integrated Architecture system, other system components such as visualisation products, controllers, and I/O products can be applied to the 1444-DYN04-01RA module to meet specific needs and applications.
March 21, 2025 BY
IN A-B

A-B 1746SC-INO4I Analogue Pure Current Output Module

The 1746sc-INO4I draws 5 volts DC from the backplane. This consumption rating is the same when the module is powered externally. The module has a removable 16-bit terminal block that accommodates Belden 8761 shielded twisted-pair cable. 1746sc-INO4I has 16-bit resolution, 366 nano-amps per count, and 320 microvolts per count. 1746sc-INO4I isolated channel analogue output models have auto-calibrating programmable limits and safety states, and are optically isolated for The 1746sc-INO4I isolated channel analogue output model has auto-calibrated programmable limits and safety states, and is opto-isolated to 750 volts DC (channel-to-channel, field wiring to backplane). 1746sc-INO4I is rated for thermal power dissipation up to 4.5 watts, with a maximum update time of 33.7 milliseconds for all 4 parallel channels, and a step response time of 1 millisecond. In addition, the 1746sc-INO4I is UL/CUL Class I, Division 2. Groups A, B, C, D, and CE listed.

Part number 1746sc-INO4I SLC 500 compatible module dcs-sis.com is an analogue output module manufactured by spectrum control. This module is manufactured by Spectrum Controls, an Allen-Bradley partner.

Encompass Partners is an Allen-Bradley approved and certified partner to provide Allen-Bradley compatible products.

This module is similar in appearance to the actual SLC 500 module. The module has four (4) differential analogue output channels providing 0-20 mA, 0-21 mA, 4-20 mA at 366 nA per count with 16-bit resolution.The module features extended output ranges, auto-calibration, programmable limits, and safety status. The module’s data can be formatted into 16-bit binary, scaled engineering units, PID scaling, 1746-NO4 format, and user-defined proportional counts. Its accuracy is 0.08 per cent of full scale at 25 degrees Celsius and 0.15 per cent at 60 degrees Celsius.

Each channel of the module is galvanically isolated at 750 VDC, which improves system reliability by eliminating the noise crosstalk that occurs when converting the module’s high-resolution data. The same isolation level as the backplane field wiring provides protection for the rack and processor.

Since the module’s isolation eliminates the need for external signal isolation devices, system costs are reduced. The module’s single-slot width also saves critical chassis slots.

The module uses Allen-Bradley design and technology and functions like an Allen-Bradley module. Its configuration is similar to the SLC 500 module and most of its features are similar to the Allen-Bradley analogue output modules.
March 21, 2025 BY
IN Prosoft

Prosoft PTQ-PDPS PROFIBUS DP Slave Network Interface Module for Quantum

The PTQ-PDPS PROFIBUS DP Slave Communication Module allows compatible processors to connect easily with PROFIBUS DP master devices.

The PROFIBUS DP slave protocol driver supports PROFIBUS V0 slave implementations.

Provides robust data transfer between the module and the processor.

User-configurable data mapping and DP port operation make the interface an easy-to-use and powerful data transfer tool.

The PTQ module’s configuration/debug serial port connects a PC to the module for configuration, status, monitoring and troubleshooting (serial cable shipped with product).

After editing on the PC, the configuration file is downloaded and stored on the PTQ module.

PROFIBUS DP slaves have access to the input and output images of the device, with up to 244 bytes of input and output data, for a total of up to 400 bytes.

The user can map these input and output data blocks into the module’s data memory for maximum flexibility and data transfer with other protocols.

Features Benefits

PROFIBUS DP-V0 slave protocol interface

 Adds PROFIBUS DP slave device monitoring to the network

 Simple configuration – GSD file available

 122 word input/122 word output, max. 200 word input/output

Licensed Backplane Technology  Manufactured under licence from Rockwell Automation®.

 High-speed data transfer between PTQ module and processor

 Installed as a generic 1756 module, includes ladder logic example

 View module data and status in RSLogix™ 5000 controller tags and UDTs

Includes ProSoft Configuration Builder software

 Graphical drag-and-drop configuration tool for simple module configuration

 Easy-to-use diagnostic window with menu-driven hardware and protocol diagnostics

 View module database contents via serial connection to a desktop PC

Backed by ProSoft technology

 20-year history of providing high-quality, reliable solutions

 Free, unlimited worldwide technical support over the phone, including pre-sales, setup or troubleshooting support, to help you get up and running quickly and stay up and running longer

 Three-year warranty to ensure reliability and protect against equipment failure

 Free ProSoft software tools are tightly integrated with our hardware …… Quick and easy total solutions to help you tailor our products to your application needs.

Configuration

ProSoft Configuration Builder (PCB) provides a dcs-sis.com PC-based software configuration solution that

for quickly and easily managing module configuration files, as well as viewing communications and network diagnostics.

PCB is a powerful solution not only for new configuration files, but also for importing configuration information from previous installations (known jobs) into new projects.

General Specifications

 Single slot – compatible with Quantum backplanes

 Module recognised as an option module with access to PLC memory for data transfer

 Configuration data is stored in the ProTalk® module’s non-volatile memory

 Modules are supplied with Microsoft Windows XP, 2000 and NT configuration software

 Up to four modules in one rack

 Local rack – modules must be placed in the same rack as the processor

 Compatible with all common quantum programming software packages, including Concept (version 2.6 or higher),

Unity Pro (2.2 or later), ProWORX (2.20 or later) and ModSoft.

 Supports quantum data types: 3x, 4x

 High-speed data transfer across backplane provides fast data update times

 Provides sample ladder files

Menu

Search for products

Back to Top
Product has been added to your cart