Category: Industry Trends

Digital microprocessor controlled float battery charger Three phase 25A – 1000A

Cyberwave DC Charger

Microprocessor controlled float battery charger

Constant potential DC power supplies for:

–  Floating & charging stationary batteries

–  Power for industrial loads

Combining the performance and accuracy of a microprocessor

with the reliability of SCR power conversion technology makes

the DC Charger the standard in stationary chargers. Easy to

install, operate and maintain. The DC Charger is packed with

the most standard features and best warranty in the industry.

Applications include

–  Power generation

– Substations

–  Microwave relay sites

– Switchgear

–  Emergency DC power

–  DC operated breakers

–  Alarm systems

–  Uninterruptible power systems

–  DC control systems and signal systems

Waveform capture

SuperSwitch3 is available with waveform capture.

The Cyberex waveform capture feature uses digital signal processors and high speed

analog to digital converters to simultaneously sample both source voltages and currents.

The waveform data is collected in 0.1 millisecond intervals as 12 bit samples to provide an extremely high

level of detail.

The SuperSwitch3 is capable of storing 25 waveform capture events for both transfer and non-transfer

events.

Each measurement contains a total of 6 cycles; 3 cycles prior to the event and 3 cycles after the event.

The waveform can be sent via email and imported into an Excel spreadsheet for additional viewing and

analysis.

Software-guided Breaker Operation and Bypass

Easy to follow command and indicator lights eliminate the causes of human error.

Integral design provides advanced diagnostics and management of three-tiered power quality.

Separate boards are used for each source, while independent drive circuits,

with high fault isolation, are used for each phase.

Fiber optic communications between the Gate Drive Board improves noise immunity and fault isolation.

Breakthrough technology

Main logic board

Integral design provides advanced diagnostics and management of three-tiered power quality.

Separate boards are used for each source, while independent drive circuits,

with high fault isolation, are used for each phase.

Fiber optic communications between the Gate Drive Board improves noise immunity and fault isolation.

Dynamic inrush restraint (DIR) limits inrush current for 480v applications

Based on loading and power system parameters, SuperSwitch3 can dynamically modify its standard

transfer switching algorithm.

This technology limits the load inrush current in situations where the switch

must make an immediate transfer to preserve load power quality.

This breakthrough technology not only restricts the stress on fuses and breakers in the power distribution

train, but also minimizes the chance of load interruption.

Ultimately, this capability provides the maximum possible power quality of the voltage output for mission

critical applications.

Cyberex Mission Critical (MC) Series Highlights

•  Integrated SuperSwitch 3 DSTS and special distribution ensures reliability and availability of the entire

critical power system

•  Patented SuperSwitch algorithm delivers unmatched transfer characteristics

•  Dynamic Inrush Restraint (DIR) decreases transformer inrush and increases system reliably

•  Waveform Capture that provides extremely high level of detail for both transfer and non-transfer events

•  Primary DSTS design options with input positioned DSTS offer maximum flexibility

•  Molded Case plug-in style switches for maximum interruption and elimination of nuisance trips

•  Fully-rated, hockey puck style SCRs for increased reliability and high amp operations

•  Software-guided breaker operation eliminates human error

•  Graphical user-interface and mimic panel for local system monitoring, configuration, and redundancy

•  Remote access capability for system, event and alarm monitoring

•  Output distribution is in a wide range of configurations including removable or fixed mounted breakers

and panels

•  Advanced communications allow access at any time from any location

Optional IR Ports

Key features

•   Revenue grade metering accuracy (<=1% error)

•   Complies with ANSI C12.1 standards

•   Ability to customize main breaker, sub-feed breaker,

panelboard, or branch circuit breaker names and/or numbers

•   Modular chassis design allows for simple additions for future expansions

Advanced communication

•   Communicate valuable system data to building management systems (BMS) or local display

•   Protocols available: Modbus RTU, Modbus TCP, and web server

Monitor system parameters including:

•   Voltage-current (RMS)

•   MIN current

•   MAX current

•   kW (power)

•   kVA-load

•   Power factor (PF)

•   Total harmonic distribution (THD)

Configure system warnings and alarms including:

•   Over/under current

•   Over/under voltage

•   Over kW

•   Over THD

•   Low PF

•   Phase loss

The Cyberex® PDU offers the most reliable and flexible

power distribution product on the market today with

almost unlimited configurations of panelboards and

sub-feed breakers to meet every load requirement.

Three cabinet designs support ratings up to 800kVA.

Our advanced Cyberex® PowerView circuit

management solutions enable end users the ability to

monitor and manage any combination of individual

branch circuits or sub-feed circuits from a single hardware platform.

With several different standard sidecar options,

the Cyberex® PDU offers the benefit of flexibility to

system designers, installers, and owners alike.

Take your distribution equipment to the next level by

managing your critical loads at the individual branch

circuit level. Rely on Cyberex® PowerView circuit

management solutions to monitor and alert your

staff of potential problems before they occur.

Understanding load profiles is the key to proactively

managing your data center distribution system and

avoiding unnecessary downtime.

•   Branch circuit management – Up to six (6) 42 circuit panelboards (252 circuits)

•   Sub-feed circuit management – Up to (65), 3-wire or (60), 4-wire sub-feed breakers

•   Main-feed circuit management – Up to four (4)

Cyberex® Power Distribution Unit (PDU) Power distribution system

Data centers are the essential ingredients that enable individual businesses to have an

electronic presence on the Internet. Reliable uninterrupted power is critical to the mission

of any organization’s data center.

ABB embraces the challenge to develop solutions

that meet the individual needs of the modern data

center while maintaining our heritage of offering

the highest reliability on the market today.

The Cyberex® PDU offers the most reliable and flexible

power distribution product on the market today with

almost unlimited configurations of panelboards and

sub-feed breakers to meet every load requirement.

Three cabinet designs support ratings up to 800kVA.

Our advanced Cyberex® PowerView circuit

management solutions enable end users the ability to

monitor and manage any combination of individual

branch circuits or sub-feed circuits from a single hardware platform.

Mission Critical MC

The mission critical (MC) provides redundant operation using two sources feeding

one common group of output distribution devices. By integrating a Cyberex

SuperSwitch®3 digital static transfer switch (DSTS) and Cyberex power distribution

unit (PDU), the MC provides the highest level of customization for diverse equipment

loads and maximum growth. Coupled with advanced communications and branch

circuit and Sub-feed circuit management, the MC is the key design element for

ensuring maximum uptime for your facility.

Mission Critical (MC) provides added reliability to any architecture

Proven components and performance

•   Integrated SuperSwitch®3 DSTS and PDU maximizes

reliability and availability of the entire critical power system

•   Fault-tolerant DSTS design eliminates single point of failure

•   Dynamic inrush restraint (DIR) decreases

transformer inrush and increases system reliability

•   Primary DSTS design options with input positioned

DSTS offer maximum flexibility

•   Software-guided breaker operation reduces

possibility of operator error

•   Multiple panelboard and breaker configurations

provide maximum design flexibility

•   Comprehensive system and circuit monitoring

provides ultimate visibility of operating data

•   Branch circuit and Sub-feed monitoring (optional)

collects, organizes and manages detailed

information about each circuit

•   Remote communications uses standard protocols

to interface with a building management system (BMS)

•   Compact footprint maximizes valuable floor space

and reduces power cabling costs

•   Easy maintenance access means low MTTR – mean

time to repair

Expert power management

The SuperSwitch®4 harnesses the power of touch with an innovative user interface

that utilizes a 10.4″ color TFT industrial use VGA LED touchscreen GUI for self-guided,

serviceability with minimal engagement, and the latest communication protocols.

The monitor module delivers best-in-class, high-resolution display of color images.

With ever-increasing power requirements and

the necessity to ensure uptime, SuperSwitch®4

provides exceptional power management features such as:

Waveform capture

SuperSwitch®4 is available with waveform capture.

The waveform capture feature uses digital signal

processors and high speed analog to digital

converters to simultaneously sample sources and

output voltages and currents. The waveform data

is collected every 0.1 millisecond intervals as 12 bit

samples to provide an extremely high level of accuracy.

The SuperSwitch®4 is capable of storing 20

waveform capture events for both transfer and

non-transfer events. Each measurement contains

a total of 10 cycles; 5 cycles prior to the event and

5 cycles after the event. The waveform can be

downloaded as an image file from the display USB

port for additional viewing and analysis.

Software-guided breaker operation and bypass

Easy to follow commands and indicator lights

eliminate the causes of human error.

Data and alarm management

With over 100 warnings/alarms types, 5000 events

can be stored or downloaded to a USB device for

analysis.

Remote access

Compatibility with building management systems

provides access from any location at any time.

An intelligent method for Dynamic Inrush Restraint

•   Makes secondary switching (one PDU

transformer) reliable.

•   Eliminates the need for complex inverter control

schemes.

•   Maintains true independence between UPS

systems (higher reliability).

•   Keeps inrush value lower than 1.2x.

•   Exceeds the ITIC and CBEMA curves standards

for critical loads, see figure 4 above.

•   Smoothly transfers the load without creating

unnecessary voltage discontinuity and

disturbances to the load.