Category: Industry Trends

NE870 supports RNRP (Redundant Network Routing Protocol), which

enables 800xA to have two physicaly separate networks, and thereby

avoid single point of failure.

Features and benefits

• NE870 has a redundant power supply and alarm function

• Wide operating voltage range (16 VDC to 60 VDC)

• Back end holds a casted DIN clip for stable mounting on a DIN-rail

• Digital IO for monitoring

• Console port for management using CLI

• USB port for easy save and load system configuration

• 3 x RJ-45 10/100/1000 Ethernet TX connectors

• 8 x RJ-45 10/100 Ethernet TX connectors

• Status LED‘s

NE870 is an industrial router which also acts as a firewal. The

router/firewa l can be utilized to segment a system in to network

areas and also security zones. NE870 is primarily intended to be

used to separate client/server networks and control networks, to

separate different control and safety networks, but also to create

RNRP tunnel areas between RNRP networks.

The concept of security zoning is described in IEC62443. In short,

security zoning is a method to segment a system into zones with

different security levels. A security level is complied with by

implementing a combination of security counter measures. The

reason why it potentialy could make sense to divide a system into

security zones, which comply with different security levels, could be

that the risk for different parts of the system varies. Another could be

that the impact of a potential incident varies.

NE870 supports RNRP (Redundant Network Routing Protocol), which

enables 800xA to have two physicaly separate networks, and thereby

avoid single point of failure.

ABB 3BHL001433P0001 Q-0730-A DEIONIZER Product Description

The ABB 3BHL001433P0001 Q-0730-A Deionizer is a high-performance, industrial-grade water purification system designed to deliver ultrapure water for critical applications in semiconductor manufacturing, pharmaceuticals, power generation, and laboratory research. This deionizer combines advanced ion exchange technology with intelligent control systems to ensure consistent water quality and operational efficiency.

Applications

• Semiconductor Manufacturing: Critical for rinsing, etching, and chemical dilution processes.
• Pharmaceuticals: Ensures compliance with GMP standards for injectable water and dialysis solutions.
• Power Generation: Used in boiler feedwater treatment and turbine cooling systems.
• Laboratory Research: Supports analytical instrumentation and high-precision experiments.

Optional Enhancements

• UV Sterilization Module: Reduces total organic carbon (TOC) to <5 ppb for ultra-low-contamination applications.
• Activated Carbon Adsorption: Mitigates organic impurities in challenging feedwater sources.
• Multistage Systems: Configurable for parallel or serial operation with RO/EDI units to achieve flow rates up to 2,000 L/h.

The Atomizer for Today’s Robotics Application

The Robobell Internal Charge is a high efficiency rotary

atomizer designed for today’s robotic production.  Its in

tended application is coating complex surfaces with sol

vent borne paint.  Its range of application goes from exte

rior car body to complex car bumper painting. This is an

internal charge atomizer; the high voltage charge is applied

to the paint on the bell cup before atomization.

Compact and Light Design

This atomizer was specifically designed to work with a ro

bot. At only 5.1 kilograms (11 pounds) it can be fitted to

practically any robot. The atomizer body diameter is 85

mm (3.375 inches). The atomizer head has a 60 degrees

bend.  The very slim and compact shape of the atomizer

allows easy access in hard to paint areas, such as door jams

or engine compartment.

Features and benefits

• 8 channels for 0 .20 mA, 4 .20 mA, 0 .10 V or 2 .10 V d.c., single ended unipolar inputs

• 1 group of 8 channels isolated from ground

• 12 Bit resolution

• Input shunt resistors protected to 30 V by PTC resistor

• Analog inputs are short circuit secured to ZP or +24 V

• The input withstand HART communication.

The AI810 Analog Input Module has 8 channels. Each channel can be

either a voltage or current input. The current input is able to handle a

short circuit to the transmitter supply at least 30 V d.c without

damage. Current limiting is performed with a PTC resistor. The input

resistance of the current input is 250 ohm, PTC included.

The voltage input is able to withstand an over or undervoltage of at

least 30 V d.c. Input resistance is 290k ohm. Transmitter supply can

be connected to L1+, L1- and/or L2+, L2-.