Category: Euresys

A variety of transmitter and receiver types is available, allowing users to

select the appropriate transceiver to provide the required optical reach over multi-mode or single-mode

fiber.

What are the benefits of using CoaXPress-over-Fiber for my application?

• Ultra-high data and frame rates

• Many accessory and cabling options to cover any length requirement

• Low CPU overhead, low latency, low jitter image acquisition

• Highest camera count per PC performance

• Very competitive cost/performance ratio

• Wide industry acceptance due to JIIA and IEEE standardization

What are the jitter and latency of CoaXPress-over-Fiber? How do they compare to “traditional”

CoaXPress?

CoaXPress-over-Fiber is based on the CoaXPress protocol and it exhibits the same high performance as

CoaXPress in terms of jitter and latency.

In addition, as CoaXPress-over-Fiber supports higher transmission speed compared to CoaXPress, the

jitter and latency will be further improved in these versions.

What is the maximum cable length with multi-mode fibers?

With a standard 40GBASE-SR4 QSFP+ Optical Transceiver Module and an MTP/MPO multi-mode fiber

cable, the maximum cable length is 150 meters.

This solution is suitable for machine vision applications.

What is the maximum cable length with single-mode fibers?

With a standard 40GBASE-ER4 QSFP+ LC DOM Optical Transceiver Module and an LC-Duplex single-

mode fiber cable,

the maximum cable length is 40 kilometers. This solution is suitable, for example, for video transmission

applications.

Cons

• There is no “power over fiber”. As signals in fiber optics are transmitted using light,

there is no way to transfer power over fiber optics and devices such as cameras must be powered

separately.

What are the cable options for CoaXPress-over-Fiber?

One of the most important benefits of CoaXPress-over-Fiber is the wide variety of connectivity options

already available from multiple companies.

The initial connectivity options for CoaXPress-over-Fiber and the Coaxlink QSFP+ at 10 Gbps are SFP+

and QSFP+ (Quad, or four times SFP+) modules.

The advantage of using modules compared to fixed interfaces is that ports can be equipped

with any suitable type of transceiver as required by the application.

What is the maximum cable length with multi-mode fibers?

With a standard 40GBASE-SR4 QSFP+ Optical Transceiver Module and an MTP/MPO multi-mode fiber

cable, the maximum cable length is 150 meters.

This solution is suitable for machine vision applications.

What is the maximum cable length with single-mode fibers?

With a standard 40GBASE-ER4 QSFP+ LC DOM Optical Transceiver Module and an LC-Duplex single-

mode fiber cable,

the maximum cable length is 40 kilometers. This solution is suitable, for example, for video transmission

applications.

What are the pros and cons of using fiber optics?

Pros

• First and foremost, cable length is not an issue anymore as fiber connectivity is basically not limited in length.

• Fiber optics provide more bandwidth, as connectivity at 10 and 25 Gbps per fiber is standard today and widely used in data centers.

• Fiber optics are immune to electrical noise, which will be a significant advantage on the production floor and in some medical applications.

• Fiber optics are lighter and smaller in size than the equivalent copper cabling,

making it appropriate for applications where this characteristic is essential, like in aircrafts or vehicles.

Cons

• There is no “power over fiber”. As signals in fiber optics are transmitted using light,

there is no way to transfer power over fiber optics and devices such as cameras must be powered separately.

What are the cable options for CoaXPress-over-Fiber?

One of the most important benefits of CoaXPress-over-Fiber is the wide variety of connectivity options already available from multiple companies.

The initial connectivity options for CoaXPress-over-Fiber and the Coaxlink QSFP+ at 10 Gbps are SFP+ and QSFP+ (Quad, or four times SFP+) modules.

The advantage of using modules compared to fixed interfaces is that ports can be equipped

with any suitable type of transceiver as required by the application.

Applications

Machine Vision for the Electronic Manufacturing Industry

• High speed image acquisition for AOI, 3D SPI, 3D lead/ball inspection machines.

• Very high resolution line-scan image acquisition for Flat Panel Display inspection and solar cell

inspection

Machine Vision for the General Manufacturing Industries

• High frame rate image acquisition for inspection machines

• Line-scan image acquisition for surface inspection machines

• Line-scan image acquisition for textile inspection

Machine Vision for the Printing Industry

• High speed line-scan image acquisition for printing inspection machines

Video Acquisition and Recording

• High-frame-rate video acquisition for motion analysis and recording

Compatible with eGrabber

• eGrabber Studio: eGrabber’s new interactive evaluation and demonstration application

• GenICam Browser: An application giving access to the GenICam features exposed by the GenTL

Producer(s)

• GenTL Console: A command-line tool giving access to the functions and commands exposed by the

Euresys GenTL Producer

Power over CoaXPress

• Power over CoaXPress : Feed your camera up to 17 W per channel under 24 VDC with automatic device

detection, measurement and overload protection.

• Total and per-channel voltage and current measurement is possible, allowing validation and

performance deviation monitoring.

Compatible with eGrabber

• eGrabber Studio: eGrabber’s new interactive evaluation and demonstration application

• GenICam Browser: An application giving access to the GenICam features exposed by the GenTL

Producer(s)

• GenTL Console: A command-line tool giving access to the functions and commands exposed by the

Euresys GenTL Producer

Compliant with GenICam

Including support for

• GenApi

• The Standard Feature Naming Convention (SFNC)

• GenTL

Machine Vision for the Printing Industry

• High speed line-scan image acquisition for printing inspection machines

Video Acquisition and Recording

• High-frame-rate video acquisition for motion analysis and recording

Compatible with eGrabber

– eGrabber Studio: eGrabber’s new interactive evaluation and demonstration application.

– GenICam Browser: This application provides access to the GenICam functionality in GenTL Producer.

– GenTL Console: This command line tool provides access to the functions and commands of the Euresys GenTL Producer.

Genicam compliant

Includes support for

– GenApi

– Standard Functional Naming Convention (SFNC)

– GenTL

Windows, Linux and macOS drivers available

– Support for Intel 64-bit platforms as well as ARM 64-bit platforms

Applications

Machine vision for electronics manufacturing

– High-speed image acquisition for AOI, 3D SPI, 3D lead/ball inspection machines.

– Very high resolution line scan image acquisition for flat panel display inspection and solar cell inspection

– Marker inspection

Machine vision for general manufacturing

– High frame rate image acquisition for inspection machines

– Line scan image acquisition for surface inspection machines

– Line scan image acquisition for textile inspection

– Robotic image acquisition

Machine vision for the printing industry

– High Speed Line Scan Image Acquisition for Print Inspection Machines

Video Capture and Recording

– High frame rate video capture for motion analysis and recording

Video Surveillance, Monitoring and Security

– Transmission and capture of HD video over long distance coaxial cables for traffic monitoring, surveillance and control

Line-scan Metadata insertion

When activated, this feature records metadata beside image data. Line metadata are captured every acquired image line.

Buffer metadata are only captured when the first image line of a buffer is acquired.

The metadata are composed with a configurable set of general purpose event counters, quadrature encoder

The metadata are composed with a configurable set of general purpose event counters, quadrature encoder position counters and/or I/O line status.

This feature allows line-scan applications to correlate image data with system events including motion

encoder positions.

Flexible line-scan camera operation through rate converters

– The rate converter is an intelligent, programmable frequency doubler/divider.

– Used with motion encoders and line-scan cameras, it allows the user to select the aspect ratio of pixels in that image.

– It provides a way to calibrate the acquisition chain to easily achieve square (1:1 aspect ratio) pixels.

C2C-Link Camera Synchronisation

Precise synchronisation of multiple connected facescan or linescan cameras

– Same card

– Different cards in the same PC

– Different cards in different PCs

Line Scan Trigger Capability 1/2

Coaxlink supports both continuous roll scanning (to inspect infinite, continuously moving surfaces without losing lines) and discrete target scanning (to capture images of targets moving in front of the camera).

(to capture images of targets moving in front of the camera).

– Triggers are used to initiate acquisition when the part is in position. Hardware triggers are from the motherboard I/O lines. Software triggers come from the application.

– Once initiated, the acquisition will continue indefinitely (for rolling the network):

– Continue indefinitely (for rolled-net monitoring applications)

– continue for a programmable number of lines (to acquire a target image of known length)

– continue until an end trigger signal is received (to acquire variable length target images)

– Controllable delay trigger to delay the start of acquisition by a programmable number of lines.

Line Scan Trigger Capability 2/2

– The Coaxlink image acquisition card controls the camera scan rate based on signals received from the motion encoder. If the part is moving faster, the camera’s acquisition line rate will increase.

increases. If the part is moving slower, the camera’s acquisition line rate decreases.

– The Coaxlink board interprets the A/B signals from the Quadrature Motion Encoder to know in which direction (forward or backward) the part is moving.

– The Coaxlink card can also be commanded to acquire laser lines when the object is moving only forwards or only backwards.

– When a backward movement is detected, the function called ‘Backward movement cancellation’ stops the acquisition. Line acquisition is automatically resumed when forward motion is resumed at the position where acquisition was interrupted.

– The rate converter enables the camera to acquire lines at any programmable resolution below or above the resolution of the motion encoder. This provides designers with an amazing degree of freedom in the application development process.

This provides designers with amazing freedom and flexibility in the application development process.

– The rate splitter allows the camera to acquire images at a resolution higher or lower than that of the motion encoder, and is implemented by splitting the encoder input signal using a programmable integer multiple.

input signal using a programmable integer multiplier.

Universal I/O Cable

– Compatible with a wide range of sensors and motion encoders

– Eight isolated current sense inputs (up to 30V, signalling up to 200kHz, individually galvanically isolated

up to 250VDC and 170VAC RMS)

– Four high-speed differential inputs (quadrature motion encoder support up to 5 MHz)

– Four isolated tactile outputs (up to 30V, 100 mA, signalling up to 100 KHz)

– Four high-speed 5V-compatible TTL inputs/LVTTL outputs (signalling up to 5 MHz)

High performance DMA (Direct Memory Access)

– Direct transfers to user-allocated memory and hardware boards displaying PCI addresses

– Hardware Dispersal – Aggregation Support

– 64-bit addressing capability

Area Scan Trigger Function

– Triggers are used to initiate acquisition when a part is in place. Hardware triggers come from Coaxlink’s I/O lines. Software triggers are from the application.

– Controllable delay triggers to control the point at which image acquisition is delayed.

– Trigger extraction feature allows certain triggers to be skipped.

– Camera exposure control allows the application to control the exposure time of the camera.

– When the system starts to acquire images, the Coaxlink capture card generates a signal at an appropriate point in time to control the lighting equipment connected to the output.

Micro-BNC (HD-BNC™) connectors provide reliable connections

– Trusted push-to-turn snap ring positive locking

– For quick and easy connection and disconnection

Connects up to 4 cameras to a single Coaxlink card

Memento Event Logging Tool

– Memento is an advanced development and debugging tool for Coaxlink and Grablink cards.

– Memento records an accurate log of all events related to the camera, the frame grabber card and its driver, and the application.

– For times containing timestamps, it provides developers with accurate timelines, as well as contextual information and logic analyser views.

– It can provide valuable collaboration during application development and debugging, as well as during machine operation.

Direct GPU Transfer

– Sample programs are available for AMD DirectGMA and NVIDIA (CUDA).

– GPU Direct Transfer eliminates unnecessary copies of system memory, reduces CPU overhead, and decreases latency, resulting in significant improvements in application data transfer times.

– Use AMD’s DirectGMA to capture image data directly to GPU memory. Compatible with AMD FirePro W5x00 and higher and all AMD FirePro S series products.