Applications that require a cable longer than 100 feet must use the External

Power Supply and Cable Adapter. Applications that use the back lighted Display

Unit must use the External Power Supply. There are two External Power Supplies:

one for connection to 115 Vac and the other for connection to 230 Vac.

The External Power/Terminal Strip Mounting Kit eases installation of External

Power Supplies. The External Power/Terminal Strip Mounting Kit is designed to fit

in the Independent Mount Housing. The Kit streamlines installation of an External

Power Supply in both the Independent Mount Housing or a user supplied housing.

Independent Mounting – display is mounted flush against a wall or

panel and located up to 100 feet away from the 3500 System. (Up to

4000 feet away from the 3500 System when using the External Power Supply). 

Up to two displays can be connected to each 3500 rack and each display

requires one empty 3500 rack slot for insertion of its corresponding DIM. When

the display is not face-mounted, the cable connection between the DIM and the

Display can be made from the front of the 3500 rack or from the I/O module at

the rear of the rack.