SLC Servo Module Overview

The SLC Servo Module (catalog number 1746-HSRV) is compatible 

with the SLC 500 family and only used with SLC 5/03™ FRN 5.0, SLC 

5/04™, or SLC 5/05™ SLC Servo Modules. The SLC Servo Module is 

programmed for incremental, absolute or speed moves, depending on 

the application.

IMPORTANT

Place the SLC Servo Module as close to the SLC processor as possible

Command Mode Operation

Motor operations are performed in command mode. To operate in this 

mode, set the mode flag (bit 15 in output word 0) to 0. In the 

command mode, the SLC processor issues commands and activates 

the following operations or moves:

• Absolute moves 

• Incremental moves

• Speed moves

• Monitor moves

• Hold moves

• Unhold moves

• Blend moves

• Emergency stop operations

• Homing operations

• Preset operations

• Clear faults

• Alternate home moves