FEN-31 HTLEncoderInterface

FEN-31 is an interface between the control board and an HTL encoder. It supports

various types of HTL encoders. A PTC, Pt1000 or KTY temperature sensor can be

attached to one of the connections of the FEN-31 interface.

FEN-31 offers an RS-422-standard-compliant TTL encoder emulation output and two

digital inputs. It also includes cable fault diagnostics for some HTL encoder types.

See the drive Firmware manual for details.

Mounting procedure:

1. Pull out the locking tab(7)

2. Insert the modulecarefully into the option slot until the retaining clips lock the

module into position

3. Pushinthelocking tab(7)

4. Fastenthescrew(included) to the stand-off.

If you need to removetheadapter moduleafter it has been installed into the drive,

use asuitable tool (e.g. small pliers) to carefully pull out the locking tab.

Note:Correctinstallation of thescrewisessentialforfulfilling the EMCrequirements

and for proper operation of the module.

Generalencoderwiringguidelines

Theencodersshouldbeconnectedtotheencoderinterfacemodulewithashielded

instrumentationcable,preferablywithtwistedpairs.Seetheencodermanualfor

additionalrequirements.Topreventtheencoderinputsfrombeingdisturbed,the

cableshieldmustbeconnectedtothechassis.Theconnectionismadeautomatically

throughthemetalhoodoftheplug,ifthecablesareconnectedthroughthecable

clampoftheplug.