General Diagnostic Features

The RTD module contains diagnostic features that can be used to help you

identify the source of problems that may occur during power up or during

normal channel operation. These power-up and channel diagnostics are

explained in Chapter 6. Module Diagnostics and Troubleshooting.

The RTD module communicates to the SLC 500 processor through the

parallel backplane interface and receives +5V dc and +24V dc power from the

SLC 500 power supply through the backplane. No external power supply is

required. You may install as many RTD modules in your system as the power

supply can support, as shown in the illustration below.

System Overview

Each individual channel on the RTD module can receive input signals from 2.

3 or 4-wire RTD sensors or from resistance input devices. You configure each

channel to accept either input. When configured for RTD input types, the

module converts the RTD readings into linearized, digital temperature

readings in °C or °F. When configured for resistance inputs, the module

provides a linear resistance value in ohms.