Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Year: 2025

Home / 2025 (Page 86)
September 5, 2025 BY
IN GE

PLC CPUs IC697CPX928 Central Processing Unit Installation

User RAM Memory

The CPX928 has a built-in memory board with 6

Mbytes of battery-backed CMOS RAM memory for

user data (program, configuration, and register data) storage.

User Flash Memory

The CPX928 has 256K of built-in, non-volatile flash

memory for user data (program, configuraton, and

register data) storage.  Use of this flash memory is optional.

Firmware Storage in Flash Memory

This CPU uses flash memory for storing the operating

system firmware.  This allows firmware to be updated

without disassembling the module or replacing

EPROMs.  The operating system firmware is updated

by connecting a PC compatible computer to the mod

ule’s serial port and running the software included

with the firmware upgrade kit.
September 5, 2025 BY
IN GE

PLC CPUs IC697CPX928 Central Processing Unit Functions

Functions

The CPX 928 is a single slot PLC CPU that is

programmed and configured by MS-DOS or

Windows based programming software to perform

real time control of machines, processes and material

handling systems. It communicates with I/O and

smart option modules over the rack-mounted

backplane using the VME C.1 Standard format.

Supported option modules include LAN Interface

modules, Programmable Coprocessor, Alphanumeric

Display Coprocessor, Bus Controller for IC660/661 I/O

products, Communications modules, I/O Link

Interface, and all of the IC697 family of discrete and

analog I/O modules.
September 5, 2025 BY
IN GE

PLC CPUs IC697CPX928 Central Processing Unit Features

Features

Single slot CPU with three serial ports

Provides 6 Mbytes of battery-backed memory in

the same slot

Contains 256K of non-volatile user flash memory

Supports BMA in release 7.92 and later

Supports floating point calculations

12K inputs and outputs (any mix), and up to 8K

analog I/O

0.4 microseconds per boolean function

96 MHz, 80486DX4 microprocessor

Supports IC66 (can be IC660 or IC661) and IC697 I/O

Programmed by MS-DOS software products, or

Windows based software products running on

Windows 95 or Windows NT over Ethernet

TCP/IP or through an SNP port

Configurable data and program memory

Battery-backed calendar clock

Three position operation mode switch

Password controlled access

Remote programmer keyswitch

memory protection

Seven status LEDs

Software configuration (No DIP switches

or jumpers)

Reference information inside front door

In-system upgradable firmware
September 5, 2025 BY
IN GE

Security S710D Two-Way Multiprotocol Data

Specifications

Data

Channels: 1 duplex

Formats: RS-232 (3-wire/5-wire), TTL, RS-422. RS-485 (2-wire/4-wire),

Manchester,Biphase, SensorNet, DTMF control

Baud Rate: 250 kbps to 512 kbps (depending on data format)

Bit Error Rate: <1.0E-9

Optical

Mode: Multimode

Optical Budget: 13 dB

Emitter: LED

Wavelength: 850 nm

Operating Distance: 3.2 mi (5.2 km)

Gain Control: Optical Automatic Gain Control (OAGC)

Transmitter Launch Power: -17 dBm

Receiver Sensitivity: -30 dBm

Electrical

Input Power: 13.5 VDC regulated

Current Requirement: 220 mA

Power Consumption: 3.5 W

Power Factor: 2

Protection: Solid-state short circuit protection

Power Supply: Model 613P (optional)

Environmental

Operating Temperature: -40 to 167 °F (-40 to 75 °C)

Maximum Humidity: 95% relative, noncondensing

Standards

Emmissions: FCC Part 15. ICES-003. AS/NZS 3548. EN55022

Immunity: ENV50204. EN61000-4-2. -3. -4. -5. -6. -11

Safety: UL 1950. CAN/CSA 22.2. NO. 950-95

Mechanical

Dimensions (LWD), Standalone Units: 5.0″ x 2.8″ x 1.5″

Dimensions, Rack Units: 1 slot (1.0″)

Weight: Standalone 0.22 lbs (0.1 kg); rack 0.55 lbs (0.25 kg)

Construction: Plastic (standalone); Aluminum (rack)
September 5, 2025 BY
IN GE

Security S710D Two-Way Multiprotocol Standard Features

Standard Features

Two-way data transmission over two multimode fibers

Supports multiprotocol data formats including RS-232. TTL,

RS-422. RS-485. Manchester, Biphase, and SensorNet

Unique data translation function

User-configurable data format

13 dB optical budget

Optical AGC

SMARTS™ diagnostics

Standalone and rack configurations

Specifications

Data

Channels: 1 duplex

Formats: RS-232 (3-wire/5-wire), TTL, RS-422. RS-485 (2-wire/4-wire),

Manchester,Biphase, SensorNet, DTMF control

Baud Rate: 250 kbps to 512 kbps (depending on data format)

Bit Error Rate: <1.0E-9

Optical

Mode: Multimode

Optical Budget: 13 dB

Emitter: LED

Wavelength: 850 nm

Operating Distance: 3.2 mi (5.2 km)

Gain Control: Optical Automatic Gain Control (OAGC)

Transmitter Launch Power: -17 dBm

Receiver Sensitivity: -30 dBm
September 5, 2025 BY
IN GE

Security S710D Two-Way Multiprotocol Overview

Overview

The S710D data transceiver provides two-way transmission of

multiprotocol data over two multimode fibers.

Data Translation

The S710D also features the unique data translation function that

allows input of one data format and output of a different format.  Data

formats are selected during installation and can be easily changed in

the field via rotary switch.

Superior Diagnostics

The SMARTS™ diagnostic technology provides an extensive array of

system status LEDs.  The integrity of the data paths can be tested with

a built-in data transmission test generator. It is not necessary to

connect to an external data device.

Standard Features

Two-way data transmission over two multimode fibers

Supports multiprotocol data formats including RS-232. TTL,

RS-422. RS-485. Manchester, Biphase, and SensorNet

Unique data translation function

User-configurable data format

13 dB optical budget

Optical AGC

SMARTS™ diagnostics

Standalone and rack configurations
September 5, 2025 BY
IN Horner

Horner APG Thermocouple Input Module General

General

In order to meet CISPR (EN 55011) Group 1. Class A Radiated Emissions levels, all components in the

PLC system require the following:

• All components must be mounted in a metal enclosure or the equivalent.  The wiring must be

routed in metal conduit or the equivalent.  All surfaces of the enclosure must be adequately

grounded to adjacent surfaces to provide electrical conductivity.

• The metal conduit (flexible conduit is acceptable) for all wiring external to the cabinet must be

mounted to the enclosure using standard procedures and hardware to ensure electrical

conductivity between the enclosure and the conduit.

• An external EMI filter must be wired to the AC Main for the PLC.  Sprague Electric Part

Number 259A9098P3 (available from GE Fanuc), or any other EMI filter which provides

equivalent performance, may be used.

• An external ground wire (16 AWG (1.32 mm2), 6″ (15.24 cm) maximum length) must be wired

from the Series 90-30 power supply safety ground wire terminal to the metal enclosure.

• On AC Main Ports connected to PLCs, MOVs shall be connected Line to Line and Line to Ground.

• All cables and Analog signals must use shielded cable with a minimum of overall foil.
September 5, 2025 BY
IN Horner

Horner APG Thermocouple Input Module DESCRIPTION

DESCRIPTION

The Horner APG Thermocouple Input Modules allow thermocouple temperature sensors to be directly

connected to the PLC without external signal processing (transducers, transmitters, etc.).  All analog and

digital processing of the thermocouple signal is performed on the module.  These modules have a

resolution of 0.5°C, and temperature values may be reported to the PLC %AI I/O table in 0.5°C or 0.5°F

increments.  There are four standard resolution models available, with four input channels

(HE693THM409/HE693THM449), and with eight input channels (HE693THM809/HE693THM889).  All

models feature open circuit detection, where the temperature value written to the %AI register goes to its

maximum value upon an open circuit condition.  Two models (HE693THM449 and HE693THM889) also

feature %I alarm bits which energize on an open circuit condition.  The first four %I bits are used for the

HE693THM449 and the first eight %I bits are used for the HE693THM889.
September 5, 2025 BY
IN Baker Hughes

Baker Hughes XMTC Panametrics Thermal Conductivity Binary Gas Transmitter operation

Theory of operation

Two ultrastable, precision glass-coated thermistors are used—

one in contact with the sample gas and the other in contact

with the reference gas (such as air in a sealed chamber). The

thermistors are mounted so that they are in close proximity

to the stainless steel (or Hastelloy®) walls of the sample

chamber. The entire transmitter is temperature-controlled,

and the thermistors are heated to an elevated temperature

in a constant-current Wheatstone bridge. The thermistors

lose heat to the walls of the sample chamber at a rate that is

proportional to the thermal conductivity of the gas surrounding

them. Thus, each thermistor will reach a different equilibrium

temperature. The temperature difference between the two

thermistors is detected in the Wheatstone bridge, and the

resulting bridge voltage is amplified and converted to a linear 4

to 20 mA output proportional to the concentration of one of the

constituents of the binary or pseudo binary gas mixture.
September 5, 2025 BY
IN Baker Hughes

Baker Hughes XMTC Panametrics Thermal Conductivity Binary Gas Transmitter Features

Features

• Ultra-stable glass-coated thermistors

• Single or dual gas push-button calibration

• PC interface package for digital output

• Type IP66/4X construction

• ATEX, IECEx, FM and CSA certified for Zone I

and Division 1 hazardous areas

The microprocessor-based XMTC is a compact, rugged,

online thermal conductivity transmitter that measures the

concentration of binary gas mixtures including hydrogen,

carbon dioxide, methane, helium and many others. The analyzer

also combines computer enhanced signal measurement with

fast-response software, real-time error detection and digital

communication via an RS232 or RS485 interface.

Menu

Search for products

Back to Top
Product has been added to your cart