Year: 2025

Easy to use

Total control. The controller manages all control activities for the I/O interface channels.

It also manages all communication functions for the communications network.

Time tamping, alarming, and trend objects are also managed within the controller.

The controller executes all control strategy with execution speeds up to every 100 ms.

Data protection. Each time you install data in a DeltaV controller, the installation information is automatically saved.

Likewise, when users make online configuration changes to a controller, the system stores these changes as well.

This way, the system always retains a complete record of all the data

that has been installed in the controller and any online changes that have been made.

Cold restart. This feature ensures that in case of power failure, the controller will restart without

manual intervention and without any other device present on the network.

Now, you don’t have to reboot from the workstation.

Simply set the restart state of the controller to current conditions.

Note: To prevent process disruption during a short power loss,

an uninterruptible power supply (UPS) is available for the controller.

Communications

The S600+ offers multiple communication options that allow you to interface to

a variety of devices (including intelligent primary elements such as USM and Coriolis meters, 

for which the S600+ has many embedded drivers).

The S600+ can be connected to serial and network printers. 

The increased communication capability of the S600+ enables you to maximize

the benefits that are being increasingly realized with these intelligent meters.

Additionally, you can use the same communication ports to access

the process data that is calculated and stored by the S600+. 

Available communication interfaces include the following:

▪ Two independent Ethernet 10/100baseT ports.

▪ HART® communication is facilitated using an optional 12-channel HART module,

supporting point-to-point and multi-drop architectures (up to 50 transmitters).

▪ An embedded web server allows remote access to the flow computer.

This allows for remote diagnostics, report access, and configuration.

Security is provided by way of user name and password protection with a detailed event log for audit purposes. 

Compatible with Windows® Internet Explorer® version 5 or greater

(version 9 or greater must use compatibility mode) and Microsoft® Edge™ browser.

▪ Two configurable EIA-232 (RS-232) serial ports for connection to a printer or RTU.

▪ Seven EIA-422/485 (RS-422/RS-485) serial ports (up to 57600 bps baud) for connection to intelligent meters, 

Modbus SCADA data networks, or a DCS Supervisory System.

▪ USB 2.0 port for downloading reports and alarm/event logs.

▪ One dedicated configuration port for connection to the Config600™ configuration software.

Compatibility

The S600+ is fully backwards-compatible with the previous S600 model.

The device utilizes existing configurations and tools that you are familiar with.

This saves you time otherwise spent on learning and configuring with new tools,

and helps to preserve your previous capital investments. 

You can easily convert existing S600 units to S600+ units,

bringing all the benefits of the new product to your existing installation.

The S600+ has been designed to safeguard the future supply and support of the S600 family for many

years to come. 

Investing in the new S600+ is low risk because the metrological calculations and code utilized in the

S600+ has already been field

proven in the S600. The S600+ provides increased processing power and memory. 

This allows Energy and Transportation Solutions to continue to add new features and functionality to the

S600+,and ensures that users continue to benefit from their investment.

This allows for remote diagnostics, report access, and configuration.

Security is provided by way of user name and password protection with a detailed event log for audit

purposes. Compatible with Windows® Internet Explorer® version 5 or greater

(version 9 or greater must use compatibility mode) and Microsoft® Edge™ browser.

▪ Two configurable EIA-232 (RS-232) serial ports for connection to a printer or RTU.

▪ Seven EIA-422/485 (RS-422/RS-485) serial ports (up to 57600 bps baud) for connection to intelligent

meters, Modbus SCADA data networks, or a DCS Supervisory System.

▪ USB 2.0 port for downloading reports and alarm/event logs.

▪ One dedicated configuration port for connection to the Config600™ configuration software.

DeltaV network switches are available in a variety of hardware solutions.

From 24-port rackmount units to fixed-port and modular field-installable switches.

DeltaV network switches are available to meet a variety of network requirements.

These switches are all you need to implement a DeltaV network.

DeltaV network switches replace currently supported Cisco and Hirschmann

switches for implementing DeltaV control networks.

The VE6046. VE6047. and VE6048 DeltaV Smart switches

can be used in applications that previously used Cisco switches.

The VE6041. VE6042. and VE6043 Smart Switches

can be used in any application where DIN rail field mounting of switches is required.

In most cases, DeltaV network switches are a direct replacement for our existing supported managed

switches.

Fully supported by Emerson. As an Emerson product,

these DeltaV network switches are fully supported by Emerson.

Fully supported by Emerson. You can get full technical support, warranty support,

product support, and education from our global service centers.

All provided by Emerson. In the unlikely event that your switch fails,

smart switches are also included in the Rapid Module Replacement Program, so you can get a

replacement quickly.

Benefits

Plug-and-play installation. Smart Switches feature a DeltaV-compatible setup

that installs into the DeltaV network right out of the box.

They require no user configuration to fully support DeltaV network communications. In addition

The default configuration cannot be changed by the user,

so you don’t have to worry about installing an incorrectly configured switch.

Automatic lockout prevents unauthorized network connections

Disabling unused network connections is a “best security practice”

that helps you comply with factory security policies.

With the switch’s built-in one-click lockout feature,

you can automatically lock out all unused network ports

on your system with the click of a button in the DeltaV application.

Full range of switch hardware configurations.

DeltaV network switches are available in a variety of hardware solutions.

From 24-port rackmount units to fixed-port and modular field-installable switches.

DeltaV network switches are available to meet a variety of network requirements.

These switches are all you need to implement a DeltaV network.

DeltaV network switches replace currently supported Cisco and Hirschmann

switches for implementing DeltaV control networks.

The VE6046. VE6047. and VE6048 DeltaV Smart switches

can be used in applications that previously used Cisco switches.

For critical process control applications that cannot tolerate interruptions, DeltaV systems offer controller

redundancy.

The redundant controller contains the same control strategy as the active controller.

A redundant link transmits control parameters to the standby controller

to ensure that it is ready to take over from the active controller.

parameters to the standby controller to ensure that it is ready to take over control if needed.

When redundancy is enabled, each module calculates the updates required by the standby controller.

These updates are transmitted to the standby controller via the redundant link.

These additional operations of controller redundancy Redundancy typically reduces CPU idle time by

about 10%. About 10 percent.

When a failure is detected, the standby controller can take over without affecting the process control

signals.

The DeltaV Event Chronicle stores a record of each switchover and the reason for the switchover, if a

reason has been determined.

Replacing an existing standby controller is as simple as removing the existing unit and installing a new

controller.

Replacing an existing standby controller is as simple as removing the existing unit and installing a new

controller.

The activated controller will detect the spare controller and the system will automatically debug and

download the new hardware.

Redundancy In addition to redundant hardware, a redundant license is required.

Redundant controllers Redundant controllers are shown as individual nodes in the Explorer window,

represented by the Redundant Controller icon.

Product description

For critical process control applications that cannot tolerate interruptions, the DeltaV system provides

controller redundancy.

For critical process control applications that cannot tolerate interruptions, DeltaV systems offer controller

redundancy.

The redundant controller contains the same control strategy as the active controller.

A redundant link transmits control parameters to the standby controller

to ensure that it is ready to take over from the active controller.

parameters to the standby controller to ensure that it is ready to take over control if needed.

When redundancy is enabled, each module calculates the updates required by the standby controller.

These updates are transmitted to the standby controller via the redundant link.

Designed for harsh environments, the SQ controller is rated for G3 corrosive

environments and has an operating temperature range of -40 to 70°C.

It is ideal for use close to process equipment.

It is ideal for remote installations close to process equipment.

For traditional installations using a central dispatch cabinet,

the CHARM I/O card can be installed in a standard I/O cabinet that provides electronic dispatch

capabilities.

The CHARM I/O card can also be used in highly distributed I/O applications.

The CHARM I/O card (CIOC) connects through the controller’s redundant Ethernet

ports to provide a highly distributed and flexible I/O solution called an e-solution.

solution. Up to 16 CIOCs can be connected to a single controller,

each providing up to 96 individually controllable signal types.

SQ controller capacity limits may vary depending on the specific application,

number of CHARM I/O signals, and control performance requirements.

Enhanced Memory Handling and Hardware Alarms, Indexed to Cover Capacity and Memory

Enhanced memory handling and hardware alarms covering capacity and memory

have been added to the SQ controller’s diagnostic information through indexing.

The WirelessHART I/O Card (WIOC) provides redundant communications

for up to 100 WirelessHART devices, ensuring high availability and reliability of wireless data.

Up to 16 WirelessHART I/O cards can be connected to a single controller, each providing up to 100

signals.

The controller automatically schedules control modules based on the assigned scan rate.

This allows each control function to be dynamically optimized for the process.

Module scan times can be set as fast as 100 milliseconds and as slow as 60 seconds.

The number of control modules that can be assigned to the controller depends

on the complexity and scan rate of each module, as well as the available CPU and memory.

The SQ controller is suitable for small to medium sized applications with up to 750 independent I/O

signals.

Product Description

The SQ Controller executes control logic based on process signals from the I/O subsystem

and provides communication with the rest of the DeltaV control system for operator interaction and data

collection.

Each controller node can be installed as a simplex or redundant node.

Each controller node can be installed as a stand-alone or redundant node.

Each controller node can be installed as a standalone or redundant node.

The controller is connected to an I/O carrier mounted on the right side of the controller carrier.

Up to 8 carriers can be connected to the local bus I/O.

Each carrier has 8 I/O cards for a total of 64 legacy I/O cards.

In addition to the 8 local input/output carriers, each controller can be connected to an additional 16 I/O

carriers.

Each controller can also communicate with an additional 16 remote I/O units that carry legacy card-based

inputs/outputs.

In addition to traditional I/O cards, the local bus supports Feldbus technologies including

Foundation Feldbus, Proffbus DP, DeviceNet and AS-i protocols.

The I/O subsystem also supports serial interface cards and Ethernet I/O interfaces.

The SQ controller also supports CHARM and WirelessHART I/O cards.

Inputs/Outputs

The S600+ is supplied with one I/O (P144) module with one Pulse Mezzanine (P148) module. 

This provides multiple digital, analog, and pulse inputs and outputs.

You can add two additional expansion modules to the S600+. 

The following expansion modules are available:

▪ I/O (P144) module – Provides additional analog and digital I/O.

▪ Prover (P154) module – Provides I/O for applications with a prover.

▪ HART (P188) module – Provides I/O for applications with HART transmitters.

▪ Pulse Mezzanine (P148) module – Provides pulse input capability.

Note: The Pulse Mezzanine module is installed as a daughterboard on an P144 or P154 module, and does

not use an additional module slot.

Configuration

Configuration of the S600+ is done through the same Windows-based intelligent

set-up tool as the S600 (Config600 Lite, Config600 Lite+, or Config600 Pro).

You can create or edit configuration files using Config600 Lite+ and

Config600 Pro (refer to Specification Sheet Config600). 

The S600+ provides the following functions through the Config600 configuration tool:

▪ Stream and station totalization.

▪ Batch totalization and retro-calculation.

▪ 3-term PID control with optional secondary control.

▪ Flow balancing.

▪ Flow scheduling.