Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Year: 2025

Home / 2025 (Page 201)
May 14, 2025 BY
IN GE

Mark VIe Series IS200TVIBH2B Vibration Terminal Block

GE IS200TVIBH2BBB The IS200TVIBH2B is a turbine control line module.

It is a high-performance, high-reliability module designed to meet the demanding requirements of turbine control applications.

The module is designed for use in a variety of applications including power generation, oil and gas, and petrochemicals.

The vibration termination board IS200TVIBH2B is one of the boards in the Mark VIe control system designed by General Electric.

This board is not compatible with any of the boards in the Mark VIe family, with the exception of the VVIB board. This board will have similar functionality to the TVBA board.

This board can be used not only in Mark VIe systems but also in Mark VI systems.

When the TVIB board is used in a Mark VI system, it can be supported in a TMR or Simplex system.

Up to two panels can be used to connect to the VVIB board. When this board is used in a TMR system, a single TVIB board will connect to three VVIB boards.

The IS200TVIBH2B board does not have any potentiometers and does not require any calibration.

On the face of the board, there are sixteen jumper switches that can be modified to suit the user’s needs. There are two barrier terminals for different types of vibration.

Technical Specifications

Number of I/O channels: 16

Input Type: Analog

Input range: 0 to 10 V

Output type: analog

Output range: 0 to 10 V

Accuracy: 0.1%

Resolution: 12 bit

Sample rate: 100 kHz

MTBF: Over 100.000 hours

APPLICATIONS

Power Generation

Oil & Gas

Petrochemical

Chemical

Food & Beverage

Pharmaceuticals

Water and Wastewater
May 14, 2025 BY
IN GE

MKVI Gas Turbine Control System IS200TBCIH1C Contact Input Terminal Block

Features:

Terminal Block Design: This IS200TBCIH1C features a rugged rectangular design with two long green terminals that provide ample connectivity for analog output signals.

Connectivity: The board features 6 jack connector ports, each equipped with 37 female connector points for seamless integration with external devices.

Potentiometers: 16 small potentiometers, organized in two rows, provide enhanced control and adjustment capabilities, allowing fine tuning of the output signals.

Noise and Surge Suppression: Filters designed to reduce high frequency noise and suppress surges, ensuring signal integrity and system stability.

Current Load Capability: The first 21 outputs are capable of handling 2.5 mA of current per point, and the last three outputs are loaded with 10 mA to meet varying output requirements.

Hardware Configuration: Simplified configuration without hardware setup or jumpers simplifies integration within the Speedtronic MKVI system.

Reliability: Known for its reliability and durability, it ensures consistent performance in demanding turbine control environments.

Compatibility:

The IS200TBCIH1C terminal block is fully compatible and integrated into the Speedtronic MKVI gas turbine control system.

It is terminated via external I/O for use primarily with GE Speedtronic Mark VI series turbine control systems.

The board’s multi-layer PCB design, fitted with SMD components and connectors, ensures compatibility with different system architectures and configurations.

GE’s ongoing revision demonstrates GE’s ongoing efforts to improve compatibility and integration with the Speedtronic MKVI system.

Applications:

The IS200TBCIH1C terminal block has applications in a variety of industries, including:

Power Generation: used in power plants equipped with gas turbines to monitor and control analog output signals critical to turbine operation and efficiency.

Oil & Gas: plays a vital role in controlling processes associated with gas turbines used in extraction, refining and distribution operations.

Chemical Processing: Provides accurate analog output signals for precise control of various chemical processes in the chemical processing industry.

Manufacturing: Ensures smooth operation and control of turbine-driven machinery in manufacturing facilities.

Renewable Energy: Integrate into control systems for renewable energy sources such as wind or solar to effectively manage analog output signals.

Water Treatment: Controls pumps, valves, and other equipment critical to water treatment processes to ensure efficient and reliable operation.

Petrochemical: Supporting precise control of processes within refineries and petrochemical plants to improve operational efficiency and safety.

Aerospace: Turbine control systems for aircraft engines, ensuring reliable and accurate analog output control.
May 14, 2025 BY
IN GE

Mark VIe Series IS2020JPDBG01 Power Distribution Boards

Functional Description:

The IS2020JPDBG01 is a power distribution board manufactured and designed by General Electric as part of the Mark VIe series used in GE distributed control systems.

The JPDB board for AC power distribution regulates, monitors, and decentralizes AC power. The module contains two line filters and an IS200JPDB board.

The module contains two independent AC power distribution circuits, each rated at 20 A at 115 or 230 V AC.

The input circuits should be wired in parallel to prevent PPDA alarms when only one AC power source is available.

Each circuit has one fuse output and three fuse and switch branch circuit outputs. the JPDF 125 V DC power distribution module has an optional connection.

The IS200JPDB has status feedback for all fuse circuits and passive supervisory circuits for both AC ranges.

On connector P1 is the supervisory circuitry for connecting cables to the board containing the power supply diagnostic PPDA I/O packages.

Port P2 on the IS200JPDB allows monitoring signals from other power distribution system cards to pass through.

Compatibility:

The JPDE, JPDF, JPDS, and JPDM feedback signal P1 and P2 connections on the IS2020JPDB are compatible, resulting in a PPDA I/O package. The AC input on the JPDF module of the same name can be used with connector JAF2.

Installation:

In the PDM cabinet, the IS2020JPDB module is mounted vertically on a metal rear base. The protective grounding system and the IS2020JPDB sheet metal must be connected.

For the first AC circuit, input power is delivered to terminals AC1H (line) and AC1N (neutral), and for the second AC circuit, input power is delivered to AC2H (line) and AC2N (neutral).

There must be a grounded neutral connection on both AC inputs. Follow the documentation for the system’s output circuit connections.

If the distribution system has a PPDA Power Diagnostics I/O package, a 50-pin ribbon cable is required to connect JPDB connection P1 to connector P2 on the board with the PPDA. Other core PDM boards can use the P2 connector for this connection.
May 14, 2025 BY
IN Woodward

Woodward 2301A Electronic Load Sharing and Speed Control

Description

The 9905/9907 series of the Woodward 2301A controls load sharing and speed of generators driven by diesel or gasoline engines, or steam or gas turbines. 

These power sources are referred to as “prime movers” throughout this manual.

The control is housed in a sheet-metal chassis and consists of a single printed circuit board. All potentiometers are accessible from the front of the chassis.

The 2301A provides control in either isochronous or droop mode.

The isochronous mode is used for constant prime mover speed with:

 Single-prime-mover operation;

 Two or more prime movers controlled by Woodward load sharing control systems on an isolated bus;

 Base loading against an infinite bus with the load controlled by an Automatic Power Transfer and Load (APTL) Control, an Import/Export Control, a Generator Loading Control, a Process Control, or another load-controlling accessory.

The droop mode is used for speed control as a function of load with:

 Single-prime-mover operation on an infinite bus or

 Parallel operation of two or more prime movers.

The following is an example of the typical hardware needed for the 2301A system controlling a single prime-mover and generator:

 A 2301A electronic control

 An external 20 to 40 Vdc power source for low-voltage models; 90 to 150 Vdc or 88 to 132 Vac for high-voltage models

 A proportional actuator to position the fuel-metering device 

 Current and potential transformers for measuring the load carried by the generator.
May 14, 2025 BY
IN Honeywell

Honeywell UDC1200 and UDC1700 Universal Digital Controllers

Product Overview

The UDC1200 and UDC1700 are microprocessor-based 1/16 DIN and 1/8 DIN controllers that offer high functionality, high reliability and low cost.

They are designed to monitor and control temperature, pressure and level in a variety of applications such as environmental chambers, furnaces, ovens, packaging machines and other applications in the plastics, food and beverage industries.

other applications in the industry.The UDC1200 and UDC1700 are easy to configure and use with large, easy-to-read dual 4-digit displays and touch-sensitive keypads.

Their outstanding flexibility allows you to configure any unit for any application and make changes when needed.

For the thousands of satisfied UDC1000/1500 users, the UDC1200/1700 controllers are backward compatible with existing UDC1000/1500 applications and installations.

Functional Features

Dual Displays

Two 4-digit displays with 7 LED segments, each configurable as

 PV and SP (non-adjustable)

 PV and SP (adjustable)

 PV and ramp SP

 PV only

Easier Configuration

Two different configuration levels (Configuration Mode and Setup Mode) provide easy access to parameters.

4-digit security code prevents unauthorised changes.

Positive Moisture Protection

Meets NEMA 3 / IP65 standards for frontal dust and water resistance.

Universal Inputs

Accepts seven different types of thermocouple, RTD, current and voltage linear inputs. All inputs can be configured as standard.

Universal Power Supplies

The UDC1200 and UDC1700 can operate on any line voltage from 50/60 Hz, 90 Vac to 264 Vac. Optional 24/48 Vac/dc models are also available.

Easy Upgrade

All option boards have no jumpers and are automatically detected by the instrument.

Easy Output Selection

All of the instrument’s outputs, including the control output, can be changed to meet the customer’s exact needs.
May 13, 2025 BY
IN Kongsberg

Kongsberg RCU500 Remote Control Unit

The RCU 500 is a stand-alone computer designed for process control.

Typical applications include

– Dynamic positioning systems

– Vessel control systems

– Process control systems

– Safety systems

Functional Features

– Power PC processor 8245. 400 MHz, running AIM and DP applications, 32 MB SDRAM memory and 16 MB flash memory

– Built-in self-test (BIST) device and error reporting system (via operator station)

– Watchdog with system status output

– Four general-purpose digital input channels

– Four general-purpose digital output channels

– Twelve general-purpose RS-232/RS-422/RS-485 serial line interfaces

– Four isolated RS-232/RS-422/RS-485 general-purpose serial line interfaces

– Dual CAN bus interfaces (1 Mbps)

– Dual Pro bus (12 Mbps)

– Serial Process Bus (SPBus) interface to RIO 400 remote I/O devices

– Dual 100 Mb Ethernet LAN connectors

– Prepare for redundant RCU operation

– Allows “hot swap” of RCU 500 in redundant systems

– Built-in high temperature and cooling fan alarms

– Easy to install and replace:

– DIN standard rail mounting

– Plug-in connection

– LED status indicator on the front
May 13, 2025 BY
IN A-B

A-B 6189-RPEHA VersaView CE Logic Module

The Allen-Bradley 6189-RPEHA is a VersaView CE logic module.

Allen-Bradley has discontinued this product and replaced it with the new 2711P-RP7A PanelView Plus CE Logic Module.

It is an intelligent controller that automates machine processes without user intervention.

Its modern, cost-effective and flexible design makes it ideal for complex or simply installed industrial applications.

It is compatible with all VersaView and PanelView Plus CE terminals.

The 6189-RPEHA module requires 100 – 240V AC input power.

For storage, it has a 2711P-RW3 built-in CompactFlash module containing 256 MB of user memory.

It is marine certified and meets the highest standards in the industry. All VersaView devices are now discontinued.

Allen-Bradley has rebranded it as part of the PanelView Plus product family.

It is suitable for use in a clean, dry, overvoltage Class II standard environment with an operating temperature of 0 – 55 °C (32 – 131 °F), an operating shock of 30 g, and a relative humidity of 5 – 90% (non-condensing).

Technical Description of 6189-RPEHA

Discontinued Versaview CE Logic Module with 256 MB RAM, 6189-RW3 internal flash memory, and 100-240 VAC input power.
May 13, 2025 BY
IN Motorola

Motorola MVME7100 VMEbus Single Board Computer

The MVME7100 increases performance and functionality while protecting the underlying investment in the VMEbus and related technologies

Up to 1.3GHz system-on-chip NXP MPC864xD, featuring dual PowerPC® e600

processor cores, dual integrated memory controllers, DMA engine, PCI Express

interface, Ethernet and local I/O

Extended temperature (-40 °C to +71 °C) and ruggedised board variants available

Four Gigabit Ethernet ports

Up to 2GB of DDR2 ECC memory, 128MB NOR flash and 2GB, 4GB or 8GB NAND flash

USB 2.0 controller for cost-effective peripheral integration (commercial temperature only)

2eSST VME bus protocol with 20MB/s VME bus transfer rate

Dual 33/66/100 MHz PMC-X interfaces, expandable with industry-standard modules

Processor PMC support

8x PCI Express expansion connectors for PMC-X and XMC expansion using SMART EC

XMCspan

MVME7216E Direct Connect Rear Transition Module (RTM) for I/O routing through the rear of the VMEbus chassis

The SMART Embedded Computing MVME7100 with System-on-Chip MPC864xD processor is the ideal solution for VMEbus customers with applications on previous-generation VMEs, in particular the MPC74xx processor.

The MVME7100 provides a development path for VMEbus customers with applications on previous generation VMEs, in particular the MPC74xx processor. The system-on-chip implementation offers power/heat dissipation, reliability and lifecycle benefits that are typically found in other architectures.

which are typically not found in other architectures.

The SMART EC MVME7100 single board computer (SBC) helps OEMs of industrial, medical and defence/aerospace equipment to increase performance and functionality

to increase competitive advantage while protecting the underlying investment in the VMEbus and related technologies.
May 13, 2025 BY
IN Motorola

Motorola MVME162P4 VME Corporation Embedded Controller

■ Processor choice: 32 MHz MC68040 enhanced 32-bit microprocessor with 8KB cache and MMU and FPU;

or 25 MHz MC68LC040 enhanced 32-bit microprocessor with 8KB cache and MMU

■ A32/D64 VMEbus master/slave interface system controller functionality

High-performance DMA support for VMEbus D64 and local bus memory burst cycles

16MB of configurable SDRAM

■ 512KB SRAM with battery backup

■ 1MB Flash memory for on-board monitor/debugger or user-installed firmware

■ 8K x 8 NVRAM and clock backup with batteries

Two serial communication ports, console port for EIA-232-D DCE and second port user configurable for

EIA-232d/EIA-422 (V.36) DTE/DCE

■ Four 16-bit or two 32-bit IndustriPack® ports, one of which is a DMA channel per port

■ Optional SCSI and Ethernet interfaces

■ Six 32-bit timers, one watchdog timer

Four-slot IndustriPack logic interface for embedded monitoring and control

Applications

The MVME162P4 family provides an ideal platform for OEMs and solution developers of

for embedded monitoring applications. It allows OEMs to incorporate

engineering costs when integrating value-added hardware and software

applications to off-the-shelf products.

To provide this wide range of solutions, the MVME162P4 allows a variety of

MPU, memory and interface options such as floating point, Ethernet, SCSI and VME.

The result is a variant of the MVME162P4 that is best suited to application

requirements
May 13, 2025 BY
IN Hitachi

HITACHI LYA010A Input/Output Module

OVERVIEW

Basic Details: LYA010A Input/Output Module HITACHI

1 PLC Input/Output Modules

Introduction 1.1 Digital and Analogue Signals

Digital input/output signals are switching signals, a 1 or a 0.

Analogue signals, there are two kinds of voltage signals or current signals, generally signals transmitted by the transmitter, such as pressure transmitter to detect the pressure of the water pipe, will output a 4-20ma or 0-10V analogue signal to the PLC, the PLC for data processing.

Switching input point (DI), processing switching input signal.

Analogue input point (AI), processing analogue input signals (0-20 MADc, 0-5VDC).

Resistance signal (including RTD) input point, processing RTD or general resistance signal.

High-speed pulse input point, processing high-speed pulse signals.

Voltage (including thermocouple) input point, processing voltage input or thermocouple signals.

utput module

The function of PLC output module is to amplify the power of the output signal.PLC signals are expressed in terms of level, in order to make them not distorted during being read, it needs to have a certain amount of reserve energy or a certain amount of signal power. The output module functions effectively as a power amplifier. The output module is the module that drives the external load.

Common PLC output devices, transistors, thyristors, relays.

PLC input modules are used to receive various parameters of the production process. (Start Stop)

PLC output module is used to send out the information obtained after the operation of the programmable controller and to complete the control of various industrial sites by realising the machine. (Execution results and output) 1. has good anti-interference ability.

2、It can meet the matching requirements of various signals in industrial site.

Menu

Search for products

Back to Top
Product has been added to your cart