Month: November 2025

Data

Crystal-clear, full-color TFT, 5.5 cm (2.2 in.) display that shows alarm messages and diagnostic information at-a-glance without the need for scrolling

Full-text display and simple-to-navigate, pop-up menus makes operation and configuration exceptionally easy

Extensive customization features enable the display to be tailored to suit your process requirements

Scalable in both hardware and software functionality to match your application requirements

Flexible control functionality including on/off, time proportioning, analog PID and motorized valve control strategies

Extensive functionality including math and logic brings powerful and flexible problem-solving capability to all your application requirements

Ethernet and MODBUS® communication options for easy integration into larger control systems or other process instrumentation

Rugged design with IP66 and NEMA 4X environmental protection

Overview

The CM10 process controller is scalable in terms of both hardware and software,

enabling it to meet your application requirements.

The flexible control functionality including on/off, time proportioning, analog PID,

dual output control and math & logic make this controller suitable for a wide range of process applications.

Fully configurable via the easy-to-navigate front panel menus or ConfigPilot configuration software,

the CM10 can be commissioned rapidly and then tuned via the advanced auto-tune functionality.

MODBUS® and Ethernet communication options ensure easy integration into a control system.

Data

Crystal-clear, full-color TFT, 5.5 cm (2.2 in.) display that shows alarm messages and diagnostic information

at-a-glance without the need for scrolling

Full-text display and simple-to-navigate, pop-up menus makes operation and configuration exceptionally

easy

Extensive customization features enable the display to be tailored to suit your process requirements

Scalable in both hardware and software functionality to match your application requirements

Flexible control functionality including on/off, time proportioning, analog PID and motorized valve control

strategies

Extensive functionality including math and logic brings powerful and flexible problem-solving

capability to all your application requirements

Ethernet and MODBUS® communication options for easy integration into larger control systems or other

process instrumentation

Rugged design with IP66 and NEMA 4X environmental protection

Overview

The CM10 process controller is scalable in terms of both hardware and software,

enabling it to meet your application requirements.

The flexible control functionality including on/off, time proportioning, analog PID,

dual output control and math & logic make this controller suitable for a wide range of process

applications.

Fully configurable via the easy-to-navigate front panel menus or ConfigPilot configuration software,

the CM10 can be commissioned rapidly and then tuned via the advanced auto-tune functionality.

MODBUS® and Ethernet communication options ensure easy integration into a control system.

Overview

The CM10 process controller is scalable in terms of both hardware and software,

enabling it to meet your application requirements.

The flexible control functionality including on/off, time proportioning, analog PID,

dual output control and math & logic make this controller suitable for a wide range of process

applications.

Fully configurable via the easy-to-navigate front panel menus or ConfigPilot configuration software,

the CM10 can be commissioned rapidly and then tuned via the advanced auto-tune functionality.

MODBUS® and Ethernet communication options ensure easy integration into a control system.

Scalable in both hardware and software functionality to match your application requirements

Flexible control functionality including on/off, time proportioning, analog PID and motorized valve control

strategies

Extensive functionality including math and logic brings powerful and flexible problem-solving

capability to all your application requirements

Ethernet and MODBUS® communication options for easy integration into larger control systems or other

process instrumentation

Rugged design with IP66 and NEMA 4X environmental protection

Function

Measuring principle

The measuring principle is based on the voltage drop across the PT100 sensor,

which is approximately proportional to the change in resistance.

The temperature monitoring relay converts the resistance value to the corresponding threshold value.

Mode of operation

The sensors to be monitored are connected to terminals T1.

T2 and T3 according to the wiring diagrams for 2-wire and 3-wire sensors.

Depending on the setting, the device operates according to the open-circuit principle h

– Measured values fall below or exceed the thresholds Measured values fall below or exceed the

thresholds:

Relay energized or closed-circuit principle g

– Measured value below or above threshold: relay de-energized. Relay energized.

All operating states are indicated by the LEDs on the front.

Easy to install

Clear indication of device status via LEDs

Easily adjusted using a rotating wheel

Push-in terminals

Features

System voltage monitoring up to 1500 V DC and 1100 V AC

System leakage capacitance monitoring up to 3000 μF

Versatile system monitoring for 2-wire, 3-wire, 4-wire and battery systems

Easily configurable wire break detection

Easily configurable non-volatile fault storage

Isolated systems are often used when an extremely reliable power supply must be guaranteed, such as in

emergency lighting systems.

Since the energy released in the event of an earth fault is not sufficient to trigger a circuit breaker

or a residual current circuit breaker, different protective devices must be used in the earthbound system.

Insulation monitors continuously determine the insulation resistance to earth and signal if a threshold

value is exceeded.

Insulation monitoring relays are the only technical solution for detecting earth faults in unearthed

systems.

Display:

– Ensures intuitive and quick setup with the help of a symbol-based menu structure.

Configuration files for various applications are also available.

Each parameter can also be modified individually and stored as a user profile for future re-use.

– Permanent display of the device status and all currently measured temperatures.

Detailed diagnostic information helps to quickly identify problems.

-Provides a wide range of operating parameter calculations, helping to reduce maintenance costs.

Uses symbols rather than text throughout the menu structure.

Near Field Communication (NFC)

Each device in the Smart Monitoring Relay series has a built-in NFC antenna, which makes it possible to

use the ABB’s EPiC mobile smartphone app allows the device to be parameterized via NFC.

To read or write data, the smartphone needs to touch the surface of the CM-TCN.

The connection is only active when data is being transferred.

In contrast to Bluetooth, there is no continuous communication between NFC and the device.

ABB EPiC Smartphone App EpiC, or “Electrification Product Intuitive Configurator”, is a mobile application

that allows configuration and checking the status of ABB low voltage products.

The app is free and can be downloaded on Android and iOS. Registration is required to use it.

Features of the 560HMR01

The 560HMR01 provides an integrated HMI that makes system monitoring easier and more efficient.

The integrated HMI board eliminates the need for a PC or laptop.

Local monitors, keyboards, mice, printers and speakers can be connected to the HMI board via USB, VGA

and audio interfaces.

The rugged design of the module ensures maintenance-free operation with maximum reliability.

Existing power supplies in the rack can be reused and redundant power supplies are also supported.

In addition, the 560HMR01 provides a battery-buffered real-time clock that maintains the current time

even when the power is turned off.

Firmware and operating system are installed in the module’s internal data memory.

560HMR01 Application Examples

Reliable and efficient monitoring of the entire system is very easy with the new 560HMR01.

In combination with the integrated HMI, users benefit from a wide range of diagnostic and maintenance

functions.

Application-specific screens provide active monitoring functions, including

– Station monitoring with user and access management

– System overview with monitoring of system events and status information for RTUs, sub-RTUs or

connected IEDs

– Event list with sorting and filtering

– Alarm list with configurable acknowledged and unacknowledged alarms

– Project tool editor for image and symbol customization and project-specific elements

The new 560HMR01 in combination with the integrated HMI is therefore the ideal solution for precise and

reliable station monitoring of substation automation systems.

560HMR01 Application Examples

Reliable and efficient monitoring of the entire system is very easy with the new 560HMR01.

In combination with the integrated HMI, users benefit from a wide range of diagnostic and maintenance

functions.

Application-specific screens provide active monitoring functions, including

– Station monitoring with user and access management

– System overview with monitoring of system events and status information for RTUs, sub-RTUs or

connected IEDs

– Event list with sorting and filtering

– Alarm list with configurable acknowledged and unacknowledged alarms

– Project tool editor for image and symbol customization and project-specific elements

The new 560HMR01 in combination with the integrated HMI is therefore the ideal solution for precise and

reliable station monitoring of substation automation systems.