Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Month: August 2025

Home / 2025 / August (Page 16)
August 23, 2025 BY
IN Advantest

Advantest Q8326 Optical Wavelength Meter

Measures Optical Wavelength with High Accuracy of 2 ppm

and High Resolution of 0.001 nm.

● Fast sampling: Five measurements/sec.

● Frequency and deviation displays

Wavelength Meter Using He-Ne Laser as Reference Wavelength

The Q8326 is an optical wavelength meter that

measures an emission center wavelength with high resolution.

The Q8326 uses a He-Ne laser for the reference

wavelength and uses the Michelson interference

method to enable high accuracy measurement.

This wavelength meter achieves

fast sampling (five per second) which is optimum

for oscillation wavelength adjustment of

LD for DWDM. With the deviation display

function, wavelength fluctuations can also be

measured with high resolution and accuracy.
August 23, 2025 BY
IN Advantest

Advantest 6243/6244 DC Voltage/Current Source/Monitor Synchronized operation

For Characteristic Test for Transistor and FET

Synchronized operation

of the two units of the

6243/6244 allows characteristic

test of a transistor or FET. Id and Ig can be

measured simultaneously,

as controlling the source

timings of drain voltage

and gate voltage to protect

a device from stress.

● Linear, log and random

sweep functions

● Pulse measurement with

a minimum pulse of 1ms

● Me a s u r eme n t d e l a y

function for measurement timing control

● Source delay function

for source timing control

For Battery Charge/Discharge Test

The 6243/6244 is available for battery charge and discharge test at constant

current (CC) or constant voltage (CV) by DC or pulse application.

In a pulse charge and discharge test, measurement must be done at

the time of and after the pulse application.

Using two units will allow measurement at the two points above and

increase the current capacity up to 20A.

● Source sink current up to ±20A (7V)

● 20A (6244) and 4A (6243) by two-unit parallel operation

● Measurement at pulse HI/LO points

● Selectable from voltage measurement or current measurement
August 23, 2025 BY
IN Advantest

Advantest 6243/6244 DC Voltage/Current Source/Monitor

DC voltage/current source monitor ideal for

electronic circuit/component evaluation

by flexible source and measurement

l Wide ranging source/measurement

6243 Voltage: 0 to ±110V Current: 0 to ±2A

6244 Voltage: 0 to ±20V Current: 0 to ±10A

l 5½-digit display with 1μV/100pA (6243), 1μV/1nA (6244)

resolution in measurement

l Pulse measurement with a minimum pulse width of 1ms

l Sink-enabled bipolar output

The 6243/6244 is a DC voltage and current source/monitor

that offers wide ranging source and measurement as follows:

6243 Voltage: 0 to ±110V Current: 0 to ±2A

6244 Voltage: 0 to ±20V Current: 0 to ±10A

The 6243/6244 provides high accuracy with 4½-digit

source resolution and 5½-digit measurement resolution, a

variety of sweep functions, and a pulse measuring function

with a minimum pulse width of 1ms. Thus, it can be

used for a wide range of applications as a power source for

evaluation in research and development of semiconductors

and other electronic components or for characteristic test

systems in a production line.
August 23, 2025 BY
IN Aerotech

Aerotech Automation1 Industrial Ethernet Support EtherCAT

Automation1

Automation1 Industrial Ethernet support is part of the user-friendly

Automation1 motion control platform, which includes the following:

• Development Software

• Controls

• Motor Drives

• Fiber-Optic HyperWire® Communication Bus

Modbus TCP/IP

Modbus TCP/IP is an extension of the Modbus family of vendor-neutral communication

protocols used for supervision and control of automation equipment.

Specifically, it provides a network and transport layer in an Internet environment

over the TCP/IP protocols for the Modbus application layer.

The most common use of the protocol is for communication with Ethernet-based PLCs,

I/O modules and other simple field buses or I/O networks. 

The Modbus TCP/IP protocol is an automation standard.

EtherCAT

EtherCAT stands for Ethernet for Control Automation Technology.

It is a real-time communication protocol over standard Ethernet hardware / networks.

In EtherCAT, the network topology has one central controller that manages

the communication of up to N (65.535) other devices.

EtherCAT devices transfer data “on the fly,” enabling high speed,

high throughput communication over the Ethernet physical layer.
August 23, 2025 BY
IN Aerotech

Aerotech Automation1 Industrial Ethernet Support Description

Industrial Ethernet (IE) is enhanced with determinism and real-time

control for use within an industrial setting. All Automation1 PC-based

and drive-based controllers support Modbus TCP/IP IE protocols,

while Automation1 drive-based controllers support EtherCAT IE protocols.

Supporting IE protocols makes Automation1 controllers highly expandable.

Data items on the IE networks are mapped to registers in the Automation1 controller,

making the networked devices directly accessible to the Automation1 controller and vice versa.

Expanded control of both protocols (and more) is planned in Automation1.

Description

Key Features

EtherCAT support for Automation1 drive-based controllers

MODBUS SUPPORT for all Automation1 control hardware

Enables expansion of your control architecture

Allows for integrating Automation1 into larger automation systems

Enables expansion of I/O on a machine controlled by Automation1
August 23, 2025 BY
IN Aerotech

Aerotech Motion Development Kit Automation1 MDK FEATURES

KEY FEATURES:

‹ Introduces the most USER-FRIENDLY

INTERFACE available for precision motion control

‹ CONNECTS & DEPLOYS PROGRAMS to the

Automation1 Intelligent Software-based Machine

& Motion Controller (iSMC)

‹ REDUCES SYSTEM SETUP/DEPLOYMENT

times—often from days to minutes

‹ Compiles large programs 50 times faster &

develops more advanced programs with NEW

PROGRAMMING LANGUAGE FEATURES

‹ Deploys CUSTOM USER INTERFACES FOR

LINUX computers

‹ MACHINEAPPS HMI BUILDER quickly

generates user interfaces

‹ ALLOWS FOR COLLABORATION with team members

Automation1

The MDK is a part of the user-friendly Automation1 motion

control platform, which also includes the following:

‹ Controls

‹ Motor Drives

‹ Fiber-Optic HyperWire® Communication Bus
August 23, 2025 BY
IN Aerotech

Aerotech Motion Development Kit Automation1 MDK

Complex motion. Simple control.

Built for power and ease of use, the Automation1 Motion

Development Kit (MDK) is the most user-friendly interface

available for industry-leading precision motion control.

Drastically reduce your system setup and deployment time

—in some cases from days to minutes.

Tools like the Machine Setup wizard, MachineApps HMI builder,

modern AeroScript™ programming language and a digital

oscilloscope enable you to set up, program and optimize servo

and stepper motors, precision stages, galvo scanning systems

and more in one development environment.

Automation1

The MDK is a part of the user-friendly Automation1 motion

control platform, which also includes the following:

‹ Controls

‹ Motor Drives

‹ Fiber-Optic HyperWire® Communication Bus
August 23, 2025 BY
IN Aerotech

Aerotech Intelligent Software-Based Motion Controller Automation1 iSMC FEATURES

KEY FEATURES:

‹ Deploy powerful machine & motion control

to either a PC-BASED OR DRIVE-BASED

hardware platform with the same Automation1

Motion Development Kit (MDK)

‹ Connects to servo motor drives, galvo

scan head controllers & more over our

HYPERWIRE® FIBER-OPTIC MOTION BUS

‹ Programmable via modern AEROSCRIPT

PROGRAMMING LANGUAGE or several

controller APIs

‹ Enjoy COMPLEX MOTION CONTROL MADE

EASY with a wide array of standard features &

development tools

Automation1

The iSMC is a part of the user-friendly Automation1 motion

control platform, which includes the following:

‹ Development Software

‹ Controls

‹ Motor Drives

‹ Fiber-Optic HyperWire® Communication Bus
August 23, 2025 BY
IN Aerotech

Aerotech Intelligent Software-Based Motion Controller Automation1 iSMC

Get Moving Faster

The Automation1 Software-Based Machine Controller (iSMC)

tightly integrates precision motion with process control. Whether

you’re programming a simple move, building a complete machine

or doing something in between, the Automation1 iSMC delivers

high-quality automation and improved throughput.

Because the iSMC integrates with our user-friendly Automation1

Motion Development Kit, you’ll quickly configure and develop

your application.

Capable of running a PC-based or drive-based hardware

platform, the iSMC allows you flexibility in deploying a wide

variety of motion control solutions.

Automation1

The iSMC is a part of the user-friendly Automation1 motion

control platform, which includes the following:

‹ Development Software

‹ Controls

‹ Motor Drives

‹ Fiber-Optic HyperWire® Communication Bus
August 20, 2025 BY
IN Aerotech

Aerotech FIBER-OPTIC MOTION BUS HYPERWIRE EMI

The HyperWire protocol provides direct driveto-drive communication at 100 kHz, allowing

multiple drives to share information within

a single servo-cycle. The result is efficient,

multi-input, multi-output (MIMO) control

algorithms that cannot be achieved using other

communication buses.

HyperWire also features Aerotech’s patentpending jitter reduction technology, which

reduces communication jitter by a factor of

80. This enables nanometer-level multi-axes synchronization.

This enables high-resolution, 64-bit, double-precision

floating point trajectory values to be sent to

Automation1 drives at astonishingly high frequencies:

• 20 kHz 64-bit trajectories for servo drives

• 100 kHz 64-bit trajectories for galvo drives

• 40 kHz 64-bit trajectories for piezo drives

A glass optical fiber with small form-factor

pluggable (SFP) connectors ensures your

reliable communication is immune to

electromagnetic interference (EMI).

Menu

Search for products

Back to Top
Product has been added to your cart