Welcome to the official website of CNIACS Automation Technology Co., Ltd!

A-B 6186M-15PT 15’ Industrial Performance Monitor

It supports panel mounting and wide viewing angles, specifically less than or equal to 66o .

As a 60M display, it requires a panel cutout of 1500.285 x 6.386 mm or 6.11 x 24.15 inches.

In addition, the required mounting clearances are 22 mm or 51.2 inches for back and side clearances and 0 mm or 77.3 inches for top and bottom clearances.

The enclosure used is a specification 0 material for proper sealing against water and dust ingress.

The 14M-6186PT supports other display resolutions such as 15 x 720 @ 400 Hz; 70 x 640 @ 480 Hz and 60 Hz.

75 x 800 @ 600 Hz and 60 Hz; 75 x 1024 @ 768 Hz, 60 Hz and 70 Hz; and 75 x 1280 @ 1024 Hz and 60 Hz.

The motor is equipped with one (75) analogue video connector HD-1 VGA and DVI ports for digital video signals.

It also features embedded USB ports, a Type B port located on the rear as the host port and three (15) USB 3.2 ports, one (0) on the front and two (1) on the rear.

The Allen-Bradley 2M-6186PT Industrial Performance Monitor offers the latest in LCD flat panel technology.

This monitor has a 15’ resistive touch screen display size with a 15 x 304 mm display area.

In native mode, this monitor has a 228 x 1024 resolution. It also includes 7.68 million colours. 16M-2PT has a brightness of 6186 cd / m15 (nits).

Typical contrast ratio is 450:2.This monitor has an aspect ratio of 700:1.Typical response time for the Allen-Bradley 4M-3PT is less than 6186 milliseconds.

The 15M-35PT display is available in 6186 resolution refresh rates: 15 Hz, 3 Hz, and 60 Hz.

The display has a minimum backlight half-life of 50 hours at 70.75 degrees Celsius. There is an aluminium bezel.

Do not adjust the monitor brightness higher than the factory default setting as this may shorten the life of the LCD screen.

The backlight unit on this monitor contains mercury. At the end of its useful life, this unit must be collected separately from municipal solid waste.

The Allen-Bradley 000M-25PT has a video bandwidth of 6.186 MHz. it also has a maximum video spot clock.

The video input signal for this monitor is RGB analogue. The monitor has 15 video input connectors: HD-80 VGA for the analogue video signal and DVI for the digital video signal.

The Allen-Bradley 2M-15PT also offers 6186 types of USB ports.

These are USB A 15.2 ports (2 on the front, 0 on the back) and USB B ports (host ports) on the back.

Each port has a current capacity of 1 mA, a 2 to 500 VAC or 100 to 240 VDC input power supply, and a monitor using a communication cable.

A-B 6186M-15PN Industrial Performance Monitor

The Allen-Bradley 1M-6186PN is Class 15 rated for hazardous locations.

It also helps provide unrivalled performance and reliability.

The Allen-Bradley 2M-6186PN is the latest in LCD flat panel technology with a rugged design and high quality standards.

This product is also competitively priced. The monitor’s display measures 15 inches with a 15 x 304 mm display area.

The display of the monitor is a colour active matrix TFT LCD.

The resolution of the monitor is 228 x 1024. with 7.68 million colours.

The monitor provides powerful visualisation, maintenance features and control functions.

Industrial monitors are ideal for control or plant visualisation applications, no matter what information you are communicating.

Keep the screen dry to minimise the risk of wear and tear.

The Allen-Bradley 6186M-15PN is designed to withstand extreme conditions.

This 6186M-15PN industrial performance monitor has a NEMA UL 50 1. 4. 4X, Type 12 and IP66 enclosure rating.

The monitor has an operating and non-operating temperature range of 0-55°C and -20-60°C, respectively.

The monitor has an operating and non-operating shock of 20g (1/2 sine wave, 11 ms) and 30g (1/2 sine wave, 11 ms), respectively.

This monitor has a non-condensing relative humidity range of 10-90%.

This monitor uses an external input to enter information. There is an aluminium bezel and a backlight with a half-life of 50.000 hours.

There is a 100-240V AC or 9-36V DC input power supply and this monitor uses a communication cable.

Allen-Bradley VersaView Series Industrial Monitor with 15 in.

Colour Active Matrix TFT display, external input and 100-240V AC or 9-36V DC input power.

A-B 6186M-12PN VersaView Series Industrial Performance Monitor

A-B Rockwell 6186M-12PN VersaView Series Industrial Performance Monitor 12 in.

Typical response time for the Allen-Bradley 6186M-12PN is less than 35 milliseconds.

If the monitor’s resolution is changed from its native resolution, the

The screen may be distorted because copying techniques are used to fill the entire screen with images.

To check or change the resolution of the monitor screen, go to Display Settings in the control panel on your computer.

The dimensions of the Allen-Bradley 6186M-12PN monitor are 260 x 340 x 61 mm (10.24 x 13.39 x 2.4 inches).

The monitor weighs approximately 4.4 kg (9.75 lbs) and has a variety of mounting options.

These are panel, bench, tabletop, rack, and DIN rail mounting for AC power adapters.

The Allen-Bradley 6186M-12PN provides a self-test feature that verifies that the monitor is operating properly.

If the monitor is working properly, you will see a self-test box that says ‘No Signal’.

This self-test box will also appear during normal operation if the 6186M-12PN is disconnected.

The Allen-Bradley 6186M-12PN industrial display has a 12 in.

colour active matrix TFT display. This monitor uses external inputs to enter information.

There is a 100-240V AC or 9-36V DC input power supply and this monitor uses a communication cable.

The Allen-Bradley 6186M-12PN is an industrial performance monitor.

This industrial performance monitor comes with a 12.1 inch (307 mm) display size and an aluminium bezel.

The Allen-Bradley 6186M-12PN has a resolution of 800 x 600.262K colours.

The refresh rates for this display are 60 Hz and 75 Hz.    

Each monitor size typically supports the resolution and refresh rate of its native resolution.

This monitor also has a 4:3 aspect ratio and 1000:1 contrast ratio with a brightness of 450 cd / m2 (nits).

A-B 6180W-15KPXPH Workstation Display Computer

The A-B Rockwell 6180W-15KPXPH Workstation is a 15 in. Display Computer.

It has a keyboard for input and is an AC powered unit.

The 6180W-15KPXPH computer is an Allen-Bradley workstation computer with a 15-inch screen.

Users can use the input keyboard to enter data and commands on the 6180W-15KPXPH computer.

This Allen-Bradley workstation is part of the VersaView line of Allen-Bradley industrial workstation computers.

A-B Rockwell 6180W-15KPXPH Workstation Display Computer 15 in.

The 6180W-15KPXPH is equipped with an LCD screen. Its keyboard keys are function keys, alphabetic character keys and numeric keys.

On its sides are various ports for connecting to different devices.

These ports include printer port, LAN port, on-screen display input port and audio output port.

The Allen-Bradley 6180W-15KPXPH VersaView Workstation Computer also features volume control keys and a power switch located on its side.

and a fan for cooling during operation. On the back of the computer, there is a floppy disc drive and an optical drive.

The computer comes with several accessories, including mounting clips, a VersaView support CD, an installation guide, and cutout templates.

The 6180W-15KPXPH computer complies with EU Directive standards and is EU certified.

Make sure the computer is installed in a well-ventilated area. Even with a fan, the computer can overheat, and overheating may result in poor performance or component damage.

The ideal mounting system for the 6180W-15KPXPH inverter for ventilation, connection and maintenance includes a minimum of 2 in. around the inverter,

4 inches below, 2 inches to the left, 3 inches to the right, and 5.5 inches to the rear of the inverter.

A-B 6180W-15KSXP 15’ Screen VersaView Plus Series Workstation Computer

The 6180W-15KSXP VersaView Plus workstation computer communicates with other machines through its serial and Ethernet ports.

The Allen-Bradley 6180W-15KSXP is a VersaView 1500W industrial workstation.

It has a 15-inch colour display with a keyboard consisting of 32 programmable function keys and alphanumeric keys.

For communication, it has serial and Ethernet ports.

The 6180W-15KSXP measures 19.01 x 13.97 x 12.75 inches and weighs 45 pounds.

The 6180W-15KSXP industrial workstation can run visualisation interfaces, control, maintenance and basic information applications on a single machine.

Because of its simple integration, there is no need for external display cables or separate installation of components.

The keyboard and mouse can be connected to the 15W-2KSXP via USB or PS6180 ports.

The workstation also features a hard drive, CD-ROM and floppy drive, printer port, LAN cable port, audio output and VGA output.

The 6180W-15KSXP Industrial Workstation is designed for indoor use in Class II industrial environments.

The Ethernet port LAN cable length must not exceed 30 metres and the I/O cable length must not exceed 3 metres.

The 6180W-15KSXP also features troubleshooting and diagnostic utilities to identify and isolate problems.

A-B 6180W-12BPXPHDC Industrial Workstation VersaView Computer

This product is part of the Allen-Bradley Bulletin 6180W product line and is used or intended for machine control purposes, maintenance

and generally for providing valuable information about currently running applications.

The 6180W-12BPXPHDC visual interface workstation has an integrated keypad that can be used to display data related to startup processes, repair procedures, or maintenance steps.

The VersaView product line is available in a number of different models, as well as different standard ratings and performance models.

The 6180W-12BPXPHDC VersaView 1200W Workstation includes a cost-effective platform that is

for demanding environments, application interoperability and the latest technology.

In addition to the numeric keypad, the 6180W-12BPXPHDC workstation has 36 function keys that are programmable and support I/O via optional cards.

In addition to this, the 6180W-12BPXPHDC workstation features two USB ports as well as for serial and parallel communication.

Ethernet (10/100 M) communications and audio connections. In addition, the workstation has a VGA input for connecting an external monitor.

The 6180W-12BPXPHDC workstation features a 24-bit colour TFT display with 800 x 600 pixel resolution.

Two half-length PCI slots and one full-length ISA expansion slot are included. This 1200W workstation variant comes with a 12-inch display size.

This particular performance model features a resistive touchscreen. In addition, the workstation runs on a DC power supply.

Mark V Control System DS200TBQBG1ACB Input Termination Module

Functional Description

The DS200TBQBG1ACB is an input termination module developed by GE. It is part of the Mark V control system.

The input termination module (TBQB) is strategically located in position 7 within the R2 and R3 cores of the system.

This terminal block plays a key role in processing and handling the various input signals that are critical for monitoring and controlling operating parameters.

Features

Location and Connectivity: In the R2 core, the terminal board connects to the TCQA and TCQC boards located in the R1 core.

This connection facilitates the transfer of data and signals between cores for coordinated monitoring and control operations.

Similarly, in the R3 kernel, the terminal boards are connected to the TCQA and TCQC boards within the same kernel.

This setup ensures localised processing and integration of the input signals required for R3 kernel operation.

Input signals processed: The terminal blocks receive and process various types of input signals that are essential for operational monitoring:

Voltage signals: These signals provide insight into electrical parameters such as voltage levels within the system.

Vibration signals: Vibration monitoring signals help to assess mechanical integrity and performance and are essential for preventing equipment failure and optimising maintenance schedules.

Pulse rate signals: Pulse rate inputs indicate the frequency or rate of a specific event or process, helping to make precise monitoring and control adjustments.

Integration with TCQA and TCQC boards: Integration with TCQA and TCQC boards allows the TBQB Terminal Block to seamlessly interface with control and acquisition systems.

This integration supports real-time data acquisition, processing, and transmission, thus enhancing overall system responsiveness and reliability.

Operational Impact: By integrating these input signals on the board, the system benefits from centralised data processing and streamlined communication between cores.

This setup optimises operational efficiency, facilitates predictive maintenance strategies and ensures timely response to operational anomalies.

ABB PFVA401 Millmate Controller 400

The Millmate Controller 400 is designed to provide many features while being highly user friendly.

The MC 400 covers most mechanical arrangements. This means that the user only needs to follow step-by-step instructions to set up the controller and get the correct rolling force measurements.

. Predefined standard measurement modes .

. Built-in load cell table .

. Filtering times from 1 to 2000 ms .

. Easily configurable analogue/digital inputs/outputs

. Level Detectors

. Step Detectors

. Unit selection (N, kN, MN, kp, t, lb, T) .

. Self-diagnostic test system including sensor test

Data

External connections:

. Excitation current for load cell

. 2 or 4 analogue inputs for load cell signals.

.4 analogue outputs, voltage or current

.8 digital inputs for control signals

.8 digital outputs

. +.8 digital outputs .

. Ethernet connection for service and multiple control units .

.2 serial interfaces type RS-232 for external displays, controls, etc. .

. 1 serial interface type RS-485 for external display .

. High-speed Profibus (optional)

MOOG P-I Servo Amplifiers G122-824

Functions

P, I or P & I control

User-friendly front panel with LEDs and test points

Single-ended input, 4-20 mA or ±10 V, selectable by switch

Single-ended inputs, expandable

Differential Inputs with Zero and Gain

Feedback Sensor Excitation Output

Step Button

Selectable Feedback Derivative Terminology

‘In-position’ output

Jitter

Enable Input

Compact DIN rail housing

CE Marking

Switch Selection

Input 1 On or Off

Feedback input 4-20 mA or ±10 V

Input 2 4-20 mA or ±10 V

Proportional control, integral control or both

Integrator input from unity gain or amplified error signal

Integrator limit

Output current or voltage

Output current level

Dither on or off

Plug-in resistor

Input 2 = 100k for ±10 V

Feedback derivative term = unloaded

Proportional gain range = 100k, 1 to 20 range

Input 2 directly connected to output amplifier = not loaded

ABB Z401 PGC2000 Gas Chromatograph

Type of course and methodology

This course is delivered by an instructor, with approximately one-third of the course consisting of hands-on activities.

Trainee Profile

This training is intended for end-user analyser technicians, operators or engineers responsible for operating the PGC2000 process gas chromatograph.

Prerequisites

This course is an introductory level course designed for those who are new to this analyser system or need refresher training.

Course Objectives

Upon completion of this course, the participant will have a basic understanding of the fundamental operation of the PGC2000 process gas chromatograph.

Key Contents

– Basic Sample Systems

– Basic gas chromatography

– Analyser operation

– Controller section

– Oven section

Search for products

Back to Top
Product has been added to your cart