Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Month: May 2025

Home / 2025 / May (Page 12)
May 15, 2025 BY
IN GE

Fanuc IC693BEM320 Solid State Serial I/O Interface Module

The GE Fanuc IC693BEM320 I/O module can be configured to transfer 32 or 64 I/O points to GE Fanuc I/O Link, but only as a slave module, not as a master module.

Simply set the jumpers located inside the front cover to the correct mode, depending on the user’s application.

The module has two serial communication ports, one for RS-485 serial protocol and the other for RS-422 serial protocol.

The GE Fanuc IC693BEM320 I/O Interface Module should always be operated within a temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).

Humidity range is 5 to 95% (non-condensing). If more extreme environmental conditions are expected, it is

It is strongly recommended that a climate control system be used on the panel where the GE Fanuc PLC and modules are installed.

Module installation should be done by a qualified technician by sliding the GE Fanuc IC693BEM320 I/O Interface Module into the

Slide the GE Fanuc IC693BEM320 I/O Interface Module into any available slot on the 90-30 or 90-70 series PLC backplane. There are two status LEDs on the front of the module.

One indicates if the module is properly powered on and the other indicates if the module is functioning properly.

Up to 16 GE Fanuc IC693BEM320 I/O Interface Modules can be set up as slaves to the master PLC.
May 15, 2025 BY
IN A-B

A-B 6176M-19PN VersaView Standard Industrial Monitor

The Allen-Bradley 6176M-19PN is a VersaView standard industrial monitor.

It has a 19-inch screen with a native resolution of 1280 x 1024 pixels and a contrast ratio of 800:1.

The flat panel display features a colour active matrix thin-film transistor screen with 16.7 million colours and a typical brightness of 250 cd/lux.

Typical brightness is 250 cd/m2 (nits). The backlight consists of CCFT lamps. Please note that this monitor requires external inputs, specifically a keyboard and mouse.

The 6176M-19PN monitor is mounted on a panel with an aluminium bezel and can be panel or rack mounted.

The monitor has one VGA and one DVI input with automatic selection.

Its rear control buttons are used to set the colour balance, contrast, brightness, video information, image lock, automatic on-screen setting (on-screen display or OSD),

The 6176M-19PN also has USB and RS-232 communication ports.

It has VGA and DVI video signals, and on-screen display (OSD) controls that provide image rotation, screen brightness, and contrast settings.

The monitor has an input voltage of 90-264V AC and a line frequency of 47-63 Hz.

The 6176M-19PN has a power consumption of 3.5 A and a power rating of 42 W. It has an operating temperature range of 32-104 oF.

It has an operating temperature range of 32-104 oF and is rated IP66 and NEMA Type 1/12/4 to protect against water and solid particle debris.

The 6176M-19PN display has an operating shock of 10 grams, 1/2 sine frequency, 11 milliseconds; and an operating vibration of 1 gram peak, 11 milliseconds.

Operating vibration is 1 gram peak, 10-500 Hz sine sweep. The entire display weighs approximately 20 pounds and measures 15.7 x 19 x 2.3 inches.
May 14, 2025 BY
IN A-B

A-B 6155R-NPXPDC Compact industrial computer without display

Description:

The 6155R-NPXPDC computer is an Allen-Bradley industrial computer without a display.

It is a Computer 6155R series computer.The 6155R-NPXPDC computer weighs 11 lbs.

The Allen-Bradley 6155R-NPXPDC computer is a compact industrial computer without a display.

The unit weighs approximately 11 lbs.

The dimensions of the computer (excluding handle and connectors) are 115 x 172 x 158 mm.

The 6155R-NPXPDC computer requires a DC power supply with 9 to 36 volts DC input.

The unit is rated at 35 watts and has a current rating of 3.89 amps at 9 volts DC.

The current rating is 0.97 amps at 36 volts DC.

Environmental specifications for the 6155R-NPXPDC computer include an operating temperature range of 32 to 131 degrees Fahrenheit,

Non-operating temperature range of 32 to 131 degrees Fahrenheit, non-operating temperature range of 4 to 140 degrees Fahrenheit, and non-condensing relative humidity range of 10 to 90%,

15-gram operating shock rating and 30-gram non-operating shock rating.

The 6155R-NPXPDC computer is an enhanced E-Series computer.

The 6155R-NPXPDC computer requires an external monitor.

The processor in this unit is an Intel Celeron M processor rated at 1 Gigahertz.

The 6155R-NPXPDC computer has 2 GB of available memory and the maximum memory supported by the system is also 2 GB.
May 14, 2025 BY
IN A-B

A-B 6177R-MMPW7 Rackmount PC VersaView Series

The 6177R-MMPW7 computer is an Allen-Bradley/Rockwell Automation VersaView series non-display computer.

It can be equipped with an Allen-Bradley/Rockwell Automation VersaView monitor if the application requires a display.

The 6177R-MMPW7 non-display computer has 4 GB of memory and 500 GB of hard drive storage.

It operates on a voltage range of 100 to 240 VAC and a frequency of 50 to 60 Hz.

The 6177R-MMPW7 non-monitor computer has an operating temperature of 0 to 50 degrees Celsius and a storage temperature of -20 to 60 degrees Celsius.

The Allen-Bradley 6177R-MMPW7 is a machine-mountable, high-performance VersaView 750R non-display industrial computer.

This AC-powered computer uses an Intel Core i3-2120 3.3 GHz processor with 4 GB of DDR3 memory, expandable up to 32 GB.

Note that the 3.5-inch hard drive installed in this computer has 500 GB of memory and uses a SATA interface.

The 6177R-MMPW7 PC is also equipped with a DVD-RW disc drive and four expansion slots.

There is one PCI, one PCI Express x16. one PCI Express x4 and one PCI Express x1 slot.

The I/O ports are 7 USB 2.0 ports (4 rear, 2 front, 1 internal), 1 front and 1 rear USB 3.0 port,

1 parallel port, 2 serial ports, 1 rear eSATAp, 2 PS2 ports, 1 microphone jack, and line-in/line-out jacks.

It also has 2 Ethernet 10/100/1000 LAN ports and 1 DVI-I and 1 DVI-D video ports with VGA support.

A VGA adapter is included with the computer.
May 14, 2025 BY
IN A-B

A-B 6181P-00N2HW71AC Non-Display Computer

The 6181P-00N2HW71AC computer is a non-display computer in the Allen-Bradley VersaView family.

It does not have a built-in display like the display computers.The 6181P-00N2HW71AC non-display computer has 100 GB of internal memory and 4 GB of RAM.

If you need to display data, you can connect an external monitor.

The 6181P-00N2HW71AC non-display computer operates on 100 to 240 volts AC.

The 6181P-00N2HW71AC is an Allen-Bradley non-display input terminal. It is a 100GB mountable terminal.

It has one RAM and one flash memory unit. The power range of the machine is 9.88 x 13.89 x 3.96 inches.

It is part of the VersaView NDM terminal product family. It also has an Intel i3-4102E processor.

It has 4GB of RAM, which allows this machine to operate quickly. It also makes the operator’s job easy.

Its input power supply is 120-240 volts AC. It can be mounted on a wall, table, shelf or machine.

The 6181P-00N2HW71AC has a 100GB memory capacity, which allows users to store information and save data for future reference and use.

The 6181P-00N2HW71AC is a non-display model that can be used for control, maintenance and basic information applications.
May 14, 2025 BY
IN A-B

A-B 6186M-15PTSS Industrial Performance Monitor

The Allen-Bradley 6186M-15PTSS is an industrial performance monitor: The Allen-Bradley 6186M-15PTSS is an industrial performance monitor.

It features a 15-inch colour active matrix TFT LCD with a native resolution of 1024 x 768 pixels.

It has a resistive touch input interface with a stainless steel bezel. It is powered by an external AC power supply with a voltage range of 100-240 VAC, 47-63 Hz.

It has RGB analogue video input signals and HD-15 VGA and DVI video input connectors.

The 6186M-15PTSS is an industrial performance monitor manufactured by Allen-Bradley.

The monitor can be used with commercially available computers and third-party industrial computers. For Allen-Bradley products.

It is especially compatible with VersaView and industrial non-monitor computers. The monitor has a video input port to provide visualisation.

The 6186M-15PTSS features a 15-inch screen with a native resolution of 1024×768. but optional frequencies and refresh rates are available.

such as 720 x 400 @ 70 Hz; 640 x 480 @ 60 Hz, 75 Hz; 800 x 600 @ 60 Hz, 75 Hz.

1024 x 768 @ 60 Hz, 70 Hz, 75 Hz; 1280 x 1024 @ 60 Hz, 75 Hz, with a response time of less than 35 ms.

The display features resistive touch screen inputs, backlighting and a half-life of 50.000 hours at 25 °C or 77 °F.
May 14, 2025 BY
IN ABB

ABB IRB 1200 One of the new generation of 6-axis industrial robots

The IRB 1200 is one of the latest generation of 6-axis industrial robots from ABB Robotics with a payload of 5 to 7kg.

It is designed for manufacturing industries that use robot-based flexible automation, such as the 3C industry.

The robot’s open architecture makes it particularly suitable for flexible use and allows extensive communication with external systems.

IRB 1200 Type A

Type A – Axis Calibration

The difference between the IRB 1200 and the IRB 1200 Type A is that the Type A uses axis calibration. Each axis has a bushing on which the calibration tool is mounted.

Therefore, the castings of the IRB 1200 and IRB 1200 A models are different.

How do I know the type of robot?

The type label on the robot base indicates whether the robot is axis calibrated or not.

These robots are named IRB 1200 A models.

Robots that are not axis calibrated are simply named IRB 1200 (no type indicated).

IRB 1200 Type B

Type B – SafeMove 2

The IRB 1200 Type B differs from the other IRB 1200 versions in that

Type B supports SafeMove 2.
May 14, 2025 BY
IN A-B

A-B 6180P-15BPXPDC Display Computer

Description

The 6180P-15BPXPDC display computer is an Allen-Bradley/Rockwell Automation VersaView display computer.

Uses DC power: The 6180P-15BPXPDC display computer is an Allen-Bradley/Rockwell Automation VersaView display computer that uses DC power.

It operates on a range of 18 to 32 volts D.C. The 6180P-15BPXPDC display computer has a 15-inch wide screen that serves as both a display and a touch screen.

The 6180P-15BPXPDC display computer screen is 15 inches wide and serves as both a display and a touch screen. The screen supports full colour graphics.

The 6180P-15BPXPDC display computer also has a keypad for control with the touch screen.

The Allen-Bradley 6180P-15BPXPDC is a VersaView Plus integrated display computer with a keypad and touchscreen.

The computer can be used as an industrial computer or operator input station. It has a 15-inch touchscreen colour active matrix thin film transistor display.

The display area is 12 x 9 inches with a native resolution of 1024 x 768. The display has a response time of 20 milliseconds and can be fitted with an anti-glare cover.

The computer has a horizontal viewing angle of 60Ëš and a vertical viewing angle of 40Ëš. The 6180P-15BPXPDC computer provides 44 function keys.

The entire computer measures approximately 13.97 x 19.01 x 8.86 inches and weighs approximately 38.8 pounds.

The computer has an Intel 945GME system chipset, dual-channel DDR II memory slots, and two DIMM slots.

Up to 2 GB of memory can be installed in each slot, with a maximum of 4 GB of system memory.

It also comes with 1 full-length ISA expansion slot, 2 full-length slots and 1 half-length slot, PCI 2.2. 5V I/O PCI expansion slot.

The 6180P-15BPXPDC features a hot-swappable 3.5-inch SATA-interface 160 GB hard drive and a slim DVD-RW drive.

Available audio jacks include a microphone in jack, line in jack, and line out jack.

The 6180P-15BPXPDC computer also offers multiple input/output ports, including a parallel port, two serial ports, and a DVI port,

4 rear USB ports and 2 front USB ports. The computer also has 2 RJ45 Ethernet LAN ports at 10/100/1000 Mbps.
May 14, 2025 BY
IN GE

Fanuc IC695CPK400 RX3i PacSystem CPU Module

The IC695CPK400 is equipped with one (1) 10/100/1000 Ethernet port and two (2) dual-port switches supporting 10/100/1000 Mbps transfer speeds. The embedded Ethernet ports enable different network topologies, including Media Redundancy (MRP) and PROFINET System Redundancy (PNSR). The embedded ports support different communication protocols such as SRTP client/server, Modbus TCP/IP, OPC-UA server, Ethernet Global Data (EGD) and PROFINET.

In addition, the controller is equipped with one (1) RS232 communication port and one (1) Micro SD port for insertion of a Secure Digital (SD) card as non-volatile removal memory. It is also equipped with two (2) USB 3.0 ports for firmware upgrades.

The IC695CPK400 also supports simplex and redundant configurations to meet the requirements of both standard and high availability systems. It supports incremental frame rates up to 3 minutes in any configuration.

The IC695CPK400 CPU is shipped with a power pack, and the CPU module is available in a standalone form factor. The module has 64 MB of available memory and supports I/O including 32K bit discrete inputs, 32K bit discrete outputs, 32K word analogue inputs, and 32K word analogue outputs.
May 14, 2025 BY
IN GE

Fanuc IC670CHS003 I/O Terminal Block

Product Description

The GE Fanuc IC670CHS003 I/O Terminal Block with wire-to-board connectors is an assembly that

used to terminate application wiring into a 20-pin male connector for easy connection and disconnection of modules.

It is compatible with hot-swap operation and can accommodate up to 20 different wires, with each wire assigned a use pin based on the module selected for a particular application.

GE Fanuc designed and manufactured the IC670CHS003 terminal block in the Field Control family to accommodate user needs and different wiring preferences.

Designed for easy installation and wiring to the board interface, the IC670CHS003 I/O Terminal Block has wire-to-board connectors.

As the name implies, the terminal block is connected to the inputs via wires (typically AWB 16-20 gauge wire).

The terminals are then connected to GE Fanuc connectors for quick insertion or removal of I/O modules.

The GE Fanuc IC670CHS003 I/O terminal block with wire-to-board connectors can accommodate up to 20 individual connections or pins to a male connector assembly.

The female connector that mates with the IC670CHS003 I/O Terminal Board’s male connector is part number 178289-8.

Each pin of the terminal block will have a different function depending on the end user application.

The user manual for the GE Fanuc IC670CHS003 I/O Terminal Block will guide the user in connecting the different GE Fanuc modules to the terminal block.

It is the user’s responsibility to provide the installer with the proper crimping tools to properly complete the cable connections in the terminal board.

Only trained personnel with extensive electrical experience should make connections to the GE Fanuc IC670CHS003 I/O terminal board,

disconnect, troubleshoot, and perform maintenance work. Due to the low environmental protection rating (IP 20) of this terminal block and its wiring, it is strongly recommended that the terminal block be placed inside a protective panel board.

Menu

Search for products

Back to Top
Product has been added to your cart