Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Month: April 2025

Home / 2025 / April (Page 17)
April 9, 2025 BY
IN GE

Fanuc IC200MDD848 Discrete I/O Module

The GE Fanuc IC200MDD848 module is a discrete I/O module manufactured by GE Fanuc Automation.

It belongs to the Versamax series and has 16 I/O points divided into 2 groups of 8 points each.

About IC200MDD848

The IC200MDD848 module is a discrete I/O module manufactured by GE Fanuc Automation and is part of the Versamax series.

The module has 16 I/O points divided into 2 different groups, each group consisting of 8 points.

The GE Fanuc IC200MDD848 module has positive logic or source-out type inputs and supports channel-to-channel isolation for each discrete output point.

In addition, the IC200MDD848 module provides various protection features for each output point, including metal oxide varistors (MOVs) and buffers.

Although diagnostics are provided, each I/O point is mapped to a status LED.

The IC200MDD848 discrete I/O module is powered by a backplane mounted on the PLC chassis.

However, an external 120 VAC power supply is required for any switches that power the loads.

The module has a *minimum* load current of 10 milliamps per input and output point, and a **load current of 5 amps.

It also has a **5 amp load current for a single 20 millisecond cycle.

The IC200MDD848 discrete I/O module draws 5 mA from 125 V peak backplane voltage.

The use of external suppression circuitry is recommended when installing the module’s wiring and configuring the outputs for inductive loads.

The IC200MDD848 module supports thermal derating as well as various I/O combinations. The number of **active points that can be run simultaneously depends on various factors.

Some of these factors include the ambient temperature, the physical location of the DIN rail, the external voltage, and the location of the device itself.
April 9, 2025 BY
IN Hitachi

Hitachi Energy ABB RED670 Transmission Line Differential Protection

The RED670 IED (Intelligent Electronic Device) is designed to protect, monitor and control overhead lines and cables. In addition, the IED is capable of handling transformer feeders, generators and transformer blocks.

It offers a wide range of features including configuration opportunities and expandable hardware to meet your specific requirements.

The RED670 IED is delivered pre-configured, type-tested and with default parameters set for fast and efficient commissioning.

These IEDs are equipped with full functionality for single or multi-breaker arrangements with single- or three-phase tripping.

They can also be easily adapted to meet the specific requirements of the power system if required. Wide application flexibility makes these IEDs an excellent choice for both new and retrofit installations.

The RED670 IED features phase-isolated current differential protection with excellent sensitivity to high-resistance faults and safe phase selection for up to five line terminals. 

Two or three winding power transformers can be included in the protection zone.

The new IED connectivity package enables handling of enhanced flexible product naming, extended Ethernet and protocol configuration, easy GOOSE engineering and

reading of through fault reports from the Relion 670 series version 2.2.

The new connectivity package enables support for the following new features in PCM600 version 2.10 and Relion 670 series version 2.2:

   Support for projects with IEDs that have flexible dcs-sis.com product naming enabled and IEDs with regular IEC 61850 data model.

   Easy configuration of the, up to six, Ethernet ports.

   Easy and simple protocol configuration for enhanced defense in depth protection.

   GOOSE engineering made efficient with the easy GOOSE engineering feature

   Simple configuration of merging units for IEC/UCA 61850-9-2LE

   An easy way to configure routes for the TCP/IP protocols of the IED

   Through fault monitoring tool (support for read of through fault reports)

   Account management tool (support for active directory)

   Enhanced session management

   FIPS compliance support

   Mixed IEC 61850 edition 1 and 2 support

   Extended UDN length support

   COMTRADE 2013 support *

   Rapid Spanning Tree Protocol (RSTP) according IEEE 802 *
April 9, 2025 BY
IN Emerson

Emerson A6312 Dual Channel Speed and Keystroke Monitor Specifications

API 670-compliant hot-swappable modules

Remotely selectable limit multiplication and trip bypass

Post-buffered proportional outputs, 0/4-20 mA outputs

Self-test features include monitoring hardware, power inputs, hardware temperature, sensors and cables

Used with displacement sensors 6422. 6423. 6424 and 6425 and drivers

con 011/91. 021/91. 041/91

6TE Wide Module for AMS 6000 19″ Rack Mount Chassis

8TE wide module for use with AMS 6500 19″ rack mount enclosure

Sensor Inputs

Number of Inputs Two, independent

Input Type Eddy Current, Differential

Emerson Sensor Input Part Numbers: 6422. 6423. 6424. 6425

Isolation Galvanic isolation

Isolated from power supply

Input resistance >100 kΩ

Input Voltage Range 0 to ±27.3 VDC

Input Frequency Range 0 – 20.000 Hz at 65.535 RPM

Measurement Range

Range Continuously adjustable via configuration software

Minimum range 2 V

Maximum range 0 – 30 V

Sensor power supply Individually buffered sensor power supply galvanically isolated from all system voltages and system supply voltages Open and short circuit protected

Nominal voltage -26.75 VDC

Available current 20 mA nominal, 35 mA maximum

Front Panel Outputs

Green LED: Two LEDs indicating channel OK dcs-sis.com for each channel

Yellow LEDs: Four LEDs indicating alarms and hazards for each channel.

Separate display for each channel

Front panel buffered outputs:

Two, ±10 V, signal input level reduction factor 0.15. >100 kΩ load, frequency range 0 Hz – 16 kHz (-3 dB)

Mini DIN configuration socket:

Module interface connection for configuration, parameter and status monitoring

RS-232

Handle: for easy removal of the card and to provide module and transducer identification boards
April 9, 2025 BY
IN ABB

ABB Symphony Plus Flame Scanner UvisorTM SF810i

Unrivalled overall capability and performance

The Symphony Plus Flame Scanner takes full advantage of the system architecture, unrivalled scalability and simplicity, CPU performance and communication speed. It is this

combined with the Uvisor™ SF810i Flame Scanner makes for an ideal flame failure protection system.

The Uvisor™ SF810i is a multi-fuel scanner that provides consistent and reliable information on flame presence and quality for utility and industrial boiler burners.

The Uvisor™ SF810i utilises state-of-the-art technology in a ruggedised housing:

– Solid-state sensor module covering the entire flame radiation spectrum (UV-VL-IR and dual-sensor UVIR)

– Signal processor unit: extremely powerful module capable of running ABB’s proprietary flame analysis process.

The real-time measurement of dynamic flame parameters is continuously subjected to extensive fail-safe verification procedures before the flame status is voted on.

– Communication drives: Redundant PROFIBUS DP-V1 links (or redundant standard Modbus) provide high-speed data transfer to external

Monitoring system

– Terminal and configuration board with local display dcs-sis.com and buttons for initial setup and online aiming assistance.

The integrated scanner is supplied with screw-type removable terminals as standard and can be supplied with IP66/67 or ATEX II 2GD EX d IIC T6 quick connectors for non-hazardous and hazardous areas respectively, for ease of maintenance.

The Uvisor™ SF810i Flame Scanner is available with accessories for the following installations:

– Line of sight (LOS) for wall burners

– Fibre optic cable (FOC) with outer conduit, cooling hose and connector flange for angle burner tilt burners

– Extended setup, parameter file archiving, group viewing, advanced diagnostics including raw flame data, real-time and historical trends for up to 254 scanning heads
April 9, 2025 BY
IN MOOG

MOOG Reinforced Motion Controller MSC-R

The Ruggedised Motion Controller is part of our Motion Controller range and is designed for high speed control and extreme environmental conditions.

It is suitable for both electric and hydraulic motion systems. It can be mounted directly on the machine without the need for an additional electronic cabinet.

For flexible communication, several models with different interfaces are available: -EtherCAT main function for

-EtherCAT master for real-time communication with valves, drives and external devices / 0

– EtherCAT slave for real-time communication with PLC host systems

-CAN/CANopen interface for communication, e.g. with sensors.

Profibus-DP slave interface for PLC host systems

-Ethernet connection for programming, commissioning and visualisation

-USB 1.1 host interface

The motion controller has the same high computing power as other Moog motion controllers and can be used with the powerful

IEC 61131 development environment Moog Axis Control Software (MACS) for free programming.

The innovative combination of rugged design, advanced computing power and flexible fieldbus support makes the ruggedised

motion controllers an excellent choice for most high-performance embedded control solutions.

Benefits

Special housing with high protection class (IP67) for wet and dirty environments

-Extended operating temperature range

High vibration resistance (30g vibration, 50g shock).

Suitable for harsh environments

-Extended resistance to fluid contamination dcs-sis.com and corrosion

-Flexible communication via various fieldbuses

Advanced computing capabilities

Integrated PLC functionality

Applications

Wind turbines

Presses and metal forming

Heavy industry (steel, aluminium)

Test and simulation systems

Chemical industry

Robotics
April 8, 2025 BY
IN Parker

Parker Compax3 Industrial Servo Drive

Compact, Intelligent and Powerful Industrial Servo Drives and Drive/Controllers

With its high performance and modular design, the Compax3 series of industrial servo drives and actuators/controllers takes servo performance and flexibility to a new level.

The modular structure of the Compax3 series allows users to choose options such as intelligent motion controllers, fieldbus interfaces and industry standard motor feedback.

In addition, a number of expansion options can be added to the standard products to optimise the functionality required for today’s demanding servo applications.

Compax3 Features

– Available in 120/240 VAC and 480 VAC input versions

– Integrated safety: EN954-1 Class 3 technology

– Continuous current outputs from 2.5 A (RMS) to 155 A (RMS)

– Transformer, encoder, high resolution SinCos® or Stegmann absolute rotary encoder feedback (single or multi-turn) or Heidenhain Endat 2.1

– Internal regenerative circuit; external resistor connection dcs-sis.com for additional power dissipation

– Easy-to-use wizard-based configuration and programming via C3 ServoManager™ software package

– Standard C3 ServoManager™ software provides comprehensive diagnostic, adjustment and 4-channel oscilloscope tools

– Software input analogue

– Automatic load recognition (auto-tuning)

– CE (EMC and LVD), UL and cUL certified
April 8, 2025 BY
IN Kongsberg

Kongsberg MN1995 Temperature Sensor

Description

Application and overview

The MN1995 temperature sensor is designed for installation on open decks.

The sensor can be used to measure the temperature of a cargo conveyor line. The sensor is equipped with a protection well MN2380.

The length of the sensor must be 25 mm longer than the dcs-sis.com length of the protection well.

The diameter of the connecting cable must be between 8 and 14 mm.

Technical specifications

MN1995

Temperature sensor

p-mn1995/ce 2005-02-08

MN1995 Temperature Sensor MN2380 Protection wells

Component type: Platinum Pt100 or Pt1000 Weight: 250 g (length = 150 mm)

Component standard: IEC 751 IEC 751 Material Aisi 316 (SS2343)

Range See ordering example Thread: ISO228-G1/2 or ISO228-G3/4

Dimensions: Contact Kongsberg Maritime Contact Kongsberg Maritime

Weight: 950 g (L = 175 mm) Standard length (L): 75. 100. 150 or 200 mm

Material: AISI 316 AISI 316

Connection: 2-wire, 3-wire or 4-wire

Sensor diameter: 12 mm

Connection cable size: 8 to 14 mm

Standard length (L): 100. 125. 175 or 225 mm

Protection class: IP67
April 8, 2025 BY
IN GE

Fanuc IC200MDL636 48V DC Positive and Negative Logic Input Module

The IC200MDL636 is powered by the baseboard. Intelligent processes are executed by the CPU or NIU. The module provides 32-bit discrete input data.

The IC200MDL636 module has individual green LEDs that indicate the on/off status of each input.

Backplane power must be available for the LEDs to execute. When backplane power is recognised, the green OK LED will indicate ON.

The basic input on/off response time Model IC200MDL636 is 0.5ms modulo.

However, some applications may require additional filtering to handle noise spikes or switch bounce situations.

About the IC200MDL636

Produced by GE Fanuc in the Versamax family, the dcs-sis.com IC200MDL636 input module is a high-capacity input module with 32 input points.

The IC200MDL636 32-point input module derives power from the backplane of the Versamax PLC to which it belongs.

The green LED “OK” on the module glows when backplane power is applied to the module.The IC200MDL636 input module provides 32-bit discrete input data.

and can accept intelligent processing by the PLC CPU or NIU. 32 inputs are divided into 4 groups of 8. depending on the application.

The 32 inputs are divided into 4 groups of 8. each of which can be positive or negative logic inputs, depending on the application. There is no point-to-point isolation.

There is no point-to-point isolation, but each group of 8 inputs is isolated from each other by 1 minute of 1500 volts AC and 250 volts AC continuously.

The GE Fanuc Versamax IC200MDL636 Input Module is rated for turn-on voltages from 34 to 60 volts DC and turn-off voltages from 0 to 10 volts DC.

No external power supply is required as the input module is powered by the PLC backplane. Its backplane power consumption is rated at 5 volts output and 140 mA maximum current.

The IC200MDL636 input module has a user settable filter time setting of 1 ms by default, but can be set to 0 ms or up to 7 ms by the user.

The module is rated for input voltages from 0 to 60 volts DC, while the nominal rating is 48 volts DC.
April 8, 2025 BY
IN ABB

ABB PPC907BE-3BHE024577R0101 Processor Module Supports High Speed Data Transfer

Features:

Data management: The PPC907BE-3BHE024577R0101 module is responsible for managing and storing a large amount of system data, including equipment operating status, process parameters, fault information and so on.

Data processing: The module has data processing capability, which can process the input data and output the corresponding control signals.

Communication: PPC907BE-3BHE024577R0101 module supports various communication protocols, such as Ethernet, Modbus, Profibus, etc., to achieve communication with other devices.

Remote Access: The module may support remote access dcs-sis.com function, allowing users to monitor and control via network connection.

Data Acquisition and Processing: The module may acquire data from various sensors and devices, and output or upload them to other systems after processing.

Application Areas:

Industrial Automation: In the field of industrial automation, PPC907BE-3BHE024577R0101 modules are widely used in various automation equipment and systems, such as robots, production line control, etc., to achieve efficient and accurate control.

Power System: In the power industry, the module can be applied to the control and protection of power generation, transmission and distribution systems, and monitoring and regulating the parameters of various power equipment.

Machinery Manufacturing: In the field of machinery manufacturing, the module can be used to control various machine tools, machining centres and other equipment to achieve high-precision and high-efficiency processing.

Process control: PPC907BE-3BHE024577R0101 module is suitable for various process control applications, such as chemical, pharmaceutical, food processing and other fields, to accurately control various processes.

Logistics systems: In logistics systems, the module can be used to control automated warehouses, conveyor belts, robots and other equipment to improve logistics efficiency and accuracy.

Data centre: In the field of data centre, the PPC907BE-3BHE024577R0101 module can be used as a central server to manage data storage and access, providing efficient data processing and storage solutions.
April 8, 2025 BY
IN Honeywell

Honeywell BW™ ICON Multi-Gas Detector

THE FIRST MULTI-GAS DETECTOR WITH AN ICON DISPLAY — FOR FAST DECISIONS

Honeywell BW™ Icon is named for its display of simple icons for gas levels and device status. 

That means no live gas readings for workers to interpret and no time consuming training. 

Instead, when there’s a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display? 

Need to report a gas alarm? Simply download the Honeywell Safety Suite Device Configurator app, 

use Bluetooth® to pair your smartphone with the detector and open the app to see the data — all organized in a report that’s ready to send.

FEATURES AND BENEFITS

RELIABLE

Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.

EASY TO MANAGE

The IntelliFlash™ green light indicates when the detector dcs-sis.com is in compliance and the amber light indicates the need for maintenance.

COMPATIBLE

The Honeywell BW™ Icon is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for 

wireless configuration.

RESPONSIVE

1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.

ACCURATE

Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.

EASY TO USE

Small, lightweight and wearable.  One-button operation.

Honeywell BW™ Icon Technical Specifications

Menu

Search for products

Back to Top
Product has been added to your cart