Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Month: April 2025

Home / 2025 / April (Page 12)
April 16, 2025 BY
IN Kongsberg

Kongsberg RL542A Radio Link

The RL542A provides up to 100 Mbit/s (aggregated 200 Mbit/s) in harsh Electronic Warfare (EW) environments for

full-duplex, reliable and secure point-to-point communications in harsh EW environments. IP and TDM interfaces are available.

Unique ECCM/EPM methodology ensures communication in harsh environments.

The RL542A can also operate in dcs-sis.com point-to-multipoint configurations.

ECM/EPM

– Frequency Hopping – Conventional and Adaptive. Frequency hopping speeds up to 1000 times/second.

– Automatic power control

– Automatic frequency avoidance

– Pulse Jammer Protection – Advanced jammer detection algorithms.

– FEC, channel coding and interleaving.

The RL542A mounts on top of the mast near the antenna and connects directly to the IP router.

No indoor or baseband unit is required.

The RL542A can be remotely located via a fibre optic interface.

The radio can be fully configured and remotely managed via the KONGSBERG Communication Management System (CMS).

The RL542A is a software-defined radio with additional analogue filtering to provide excellent tactical performance, ensuring long range and good positioning capability.

Features

– Point-to-Point

– Point-to-Multipoint

– Lightweight, compact and easy to operate

– Field-proven equipment with rugged design

– Frequency hopping

– Flexible data interface and SNMP-based management

– Spectrum-efficient modulation

– Communication carrier in IP-based tactical systems

– AES256 encryption (optional)
April 16, 2025 BY
IN A-B

A-B 2094-BC07-M05 Integrated Axis Module Multi-axis Servo Drive Kinetix 6000

Description

The 2094-BC07-M05 is an n integrated axis module that is part of the Kinetix 6000 multi-axis drive.

The module is 400 V class with converter and inverter ratings of 45 kW and 49 a. The module has a power consumption of 71-226 watts. It does not have an integrated Safe Torque Off (STO) feature.

About 2094-BC07-M05

The 2094-BC07-M05 is a multi-axis servo drive that belongs to the Kinetix 6000 product category.

The drive has an input voltage range of 324-528 Vrms, 3-phase, a nominal power supply range of 360 VAC-480 VAC, and an input frequency of 47-63 Hz.

And the control power supply AC voltage is dcs-sis.com designed for 95-264 VACrms, 1 phase, with a nominal supply range of 110-240 VACrms.

It has a maximum input current of 71.0 (rms) amps and a maximum inrush current (0-pk) of 62.2 amps.

The module’s DC input voltage range (common bus follower) is 458-747 V DC, while the DC input current (common bus follower) is 67.7 A. The module has a maximum input current of 71.0 (rms) amps, while the maximum inrush current (0-pk) is 62.2 amps.

The servo drive has a continuous output power to the bus of 45 kW, while the a-series drives have a peak output power of 90 kW.

The B, S and D series drives have a maximum output power of 135 kW and an efficiency of 97 per cent.

Similarly, the drives have a continuous output current to the bus of 67.7 amps and a peak output current to the bus of 135 amps.

Series A drives are 4 amps and Series B, C and D drives are 203.2 amps.

The bus voltage rating for this driver is 825 VDC with a bus undervoltage of 275 VDC. the internal circuits have a continuous power rating of 200 W and a peak power rating of 22.5 kW.

The appropriate internal circuit resistor has a resistance value of 28.75 . It is symmetrical with a converter inductance of 75H, an inverter capacitance of 1410F and a short-circuit current rating of 200.000 A (rms).
April 14, 2025 BY
IN A-B

A-B 1785-L80B Enhanced PLC-5 Series Programmable Logic Controller

Description.

The 1785-L80B is an Allen-Bradley Enhanced PLC5 programmable logic controller (PLC).

The controller has 100.000 words of embedded user memory and is equipped with several communication interfaces.

Examples include four (4) DH/Remote I/O (adapters or scanners), one (1) configurable RS-232. -423. and RS-422A compatible serial port, and two (2) programming terminals.

It can accommodate up to 3072 arbitrary mixes or 3072 inputs and 3072 outputs in free mode!

About the 1785-L80B

The Programmable Controller 1785-L80B is the core dcs-sis.com component of every control system based on the Allen-Bradley PLC-5 Series.

The 1785-L80B connects local, expansion, and remote I/O modules on a variety of communication interfaces into a single control system.

There are four built-in ports on the 1785-L80B controller. The ports are labelled Channel 1A, Channel 1B, Channel 2A and Channel 2B.

All ports can be configured as remote I/O scanners, remote I/O adapters, and DH communication interfaces.

DH communications can be used both for remote programming and monitoring of the 1785-L80B and for creating peer-to-peer communication networks between various PLC-5 controllers.

The Remote I/O connection is used for real-time data exchange between the controller and I/O, operator interface and other functions.

All four channels on the 1785-L80B can be used as either remote I/O scanners or remote I/O communications adapters.

The 1785-L80B is designed with multiple communication interfaces that can be used to communicate with different automation devices simultaneously.

It has four (4) DH/Remote I/Os (adapters or scanners) labelled CH1A, CH1B; CH2A and CH2B;.

One (1) configurable serial port for RS-232 and RS-422A electrical standards supporting the DF1 protocol, and two (2) programming terminals.

The 1785-L80B is capable of communicating with up to 93 I/O chassis and up to 32 Remote I/O (RIO) racks.

Enhanced PLC 5 controllers, such as the 1785-L80B, are primarily used when the control system needs to communicate with a large number of remote I/O (RIO) devices and when connecting to a large number of Data Highway+ (DH) devices.

For installation, the 1785-L80B can be mounted in the 1771-A1B, 1771-A2B, 1771-A3B, 1717-A3B1. and 1771-A4B PLC5 chassis.

Power supplies supported by this processor include the 1770-P1. 1770-P45. 1770-P5. 1771-PE, 1771-P4S1. 1771-P6S1. 771-P4R, and 1771-P5R.

It is also used to configure I/O modules and expansion racks.
April 14, 2025 BY
IN A-B

A-B 1394-SJT22-A GMC Standard System Module

DESCRIPTION

The Allen-Bradley 1394-SJT22-A is a GMC standard system module with a /-10VDC input.

The module requires an input voltage of 380/460 volts AC, three phase, an input frequency of 50/60 Hz, and a current of 28.6 amps.

It has an electrical output voltage of 530/680 V DC and a continuous power output of 17/22 kW with a peak power of 136 kW.

The continuous current output is 33.8 A and the peak current is 200.0 amps.

About the 1394-SJT22-A

The 1394-SJT22-A is a 1394 GMC Turbo system module that is part of the Allen-Bradley 1394 multi-axis motion control system.

The system module is primarily used for analogue servo dcs-sis.com systems and provides digital servo drives with a /-10VDC interface.

The system module is mounted on the far left side of the 1394 assembly, which includes the axis modules, bus connectors, and termination resistors.

Each module is mounted via a slide-lock mechanism and fasteners that are precisely aligned with each other.

The system module uses RS232/422 communication and supports the DH485 communication protocol. It can optionally be fitted with Remote I/O communication (RIO) and AxisLink communication interfaces.

When installing this system module or any other product in a 1394 system, the ambient temperature of the mounting location must be no higher than 50.0 degrees Celsius and mounted on a flat, stable vertical surface.

The mounting panel must have minimal shock and vibration, and the environment must be free of moisture, oil, dust, and corrosive gases.

This system module is not equipped with an internal shunt resistor. An external shunt module must be installed.

Compatible shunt resistors include the 1394-SR9A, -SR9AF, -SR36A, or -SR36AF manufactured by Allen-Bradley.

The shunt module generates a significant amount of heat. Because hot air rises naturally, instruments or components that may be affected by hot air must not be mounted on top of the external shunt module.

The top clearance must be 254 mm (10.0 inches) and 155 mm (6.1 inches) on both sides, including the bottom area of the system module.
April 14, 2025 BY
IN Woodward

Woodward 2301E Digital Load Sharing and Speed Controller

The 2301E provides load distribution and speed control for generators driven by diesel or gas engines.

Using the built-in flexible configuration software, application variants can now be selected using an external computer (PC).

Changing the application to suit the engine speed range, gear teeth and selecting forward or reverse action is just a software setup away.

The 2301E controller is backward compatible with the existing 2301D product as it has the same footprint and mounting configuration.

The new controller ensures the continued dcs-sis.com availability of a proven and versatile product with enhanced features:

-Separate RS-232 and RS-422 serial ports, both with 9-pin connectors

-Additional status LEDs for power and RS-422 communication

-Failure data logging feature that collects 16 seconds of data every 10 milliseconds during shutdown, peak speed, and load detection events

-Low current PWM output for driving Woodward L-Series, F-Series, P-Series and PISC actuators

-New terminal block accommodates additional I/O, with most terminals located in the same location as the 2301D model.

-Major compliance approvals

-Engine/generator or pump applications

-Multiple dynamics

-Manifold Air Pressure (MAP) limiter

-Torque limiter

-Low speed sensing capability

-Remote speed and load reference

-Soft load transfer

-Automatic idle to rated switching

-Load dump/load pulse option

-Idle down function

-Optional Modbus® serial communication

-Adaptive speed sensing algorithm

-Two serial ports

-Data logging function

-2301E ToolKit service tool or Control Assistant programmable

-Common or hazardous location chassis
April 14, 2025 BY
IN ABB

ABB AC 800PEC High Performance Control System

High-performance applications with extremely fast control algorithms

– Cycle times ranging from 100 μs (microseconds) for fast control loops to several seconds for long-term transient operation require specialised control equipment.

Dual-core processor units combine these high-speed controls with low-speed process control tasks normally performed by stand-alone PLC (Programmable Logic Controller) units.

The dual-core processor unit takes the technology a step further by combining these high-speed control and low-speed process control tasks normally performed by a separate PLC (Programmable Logic Controller) unit.

The AC 800PEC embedded system is unique in the field of industrial process controllers for its robust and flexible architecture and integrated standard communication functions.

The AC 800PEC is the ultimate way to fulfil high demands.

The AC 800PEC offers a unique combination of functions for demanding applications:

– Short cycle times, down to 100 μs

– High processing power

– Fast communication and input/output via optical links

– Programming tools:

– System engineering using ABB Control Builder’s IEC61131-3 language.

Compact and specialised

– Product and control development using MATLAB®/Simulink® dcs-sis.com for model-based design, easily bridging the gap from simulation to implementation

– Fully integrated with ABB Ability™ System 800xA

– Innovative and flexible use of FPGAs to include protocol and application functionality in the device without creating an additional processor load

– Optical communications

– Industrial grade hardware with no moving parts

– Long life and easily upgradable

– Robust file-dependent system, unaffected by power failures

Arc Furnace Applications

– Stable arc detection

– Different control modes (constant current, constant power or constant resistance)

– Quick connection to Power Quality Systems (PQS)

Includes ELREG (electrode regulation; control of the anode hydraulic system) function:

– Manual electrode control (analogue or digital)

– Electrode quick lift function (with or without separate quick lift valve)

– Automatic arc extinguishing function

– Automatic re-arc function

– Adaptive electrode control according to furnace conditions or heating stage

– Stacked integral control circuit

– Voltage fluctuation measurement (stability index calculation)

– Arc detection/protection of the furnace roof

– Protection of the furnace top from arcs during arc extinguishing

– Hydraulic oil pressure monitoring and electrode protection

– Collapse detection

– High-pressure detection

– Control logic for backpressure valves

– Voltage monitoring to ground

– Voltage monitoring at the top of the furnace

– Automatic raising of the electrode after a furnace shutdown command (distance or position selectable)

– Shut-off valve control

– Electrode speed limitation to protect electrode and arm

– Future functions

– Automatic proportional valve linearisation
April 14, 2025 BY
IN ABB

HRBX01K02 ABB Ability™ Symphony® Plus Hardware Selector

The cRBX01 Compact Remote Bus Extender is a fibre optic repeater module for the Symphony Plus redundant HN800 IO bus.

Module.

The cRBX01 fibre optic repeater transparently extends the HN800 IO bus of the SPCxxx controller.

The cRBX01 repeater requires no configuration, and the remote IO or communication module has the same functionality, performance, and capacity as the local module.

The HRBX01K02 is a redundant repeater kit that includes 2x cRBX01 modules + 1x RMU610 base.

Features and Benefits

The cRBX01 Fibre Repeater Module supports up to 60 dcs-sis.com HN800 devices per remote link.

The fibre optic HN800 bus uses a star topology (point-to-point) with up to 8 remote links per controller.

Each remote link can support up to 60 HN800 devices (SD Series IOs or communication modules).

Each link can be up to 3.0 kml long using 62.5/125 µm multimode fibre optic cable with cRBX01.
April 14, 2025 BY
IN ABB

ABB PM866AK01 Compact Product Suite Hardware Selector

The CPU board contains the microprocessor and RAM memory, real-time clock, LED indicators, INIT button, and CompactFlash interface.

The PM866 / PM866A controller’s backplane has two RJ45 Ethernet ports (CN1. CN2) for connection to the control network and two RJ45 serial ports (COM3. COM4).

used to connect to the control network, and two RJ45 serial ports (COM3. COM4).

One of the serial ports (COM3) is an RS-232C port with modem control signals.

The other port (COM4) is isolated for connecting dcs-sis.com configuration tools.

The controller supports CPU redundancy for increased availability (CPU, CEX-Bus, communication interfaces and S800 I/O).

Easy DIN rail mounting/dismounting procedure using a unique sliding and locking mechanism.

All baseboards have a unique Ethernet address that provides hardware identification for each CPU.

This address can be found on the Ethernet address label on the TP830 backplane.

Features and Benefits

ISA safety certified – learn more

Reliability and simple troubleshooting procedures

Modular and incrementally expandable

IP20 rated protection, no enclosure required

Controller can be configured with 800xA control generator

Controller is fully EMC certified

Segmented CEX buses using a pair of BC810 / BC820

Hardware based on the best communication connection standards (Ethernet, PROFIBUS DP, etc.)

Built-in redundant Ethernet communication ports
April 14, 2025 BY
IN Woodward

Woodward 505DR Dual Redundant Turbine Controller

The 505DR® Dual Redundant Turbine Controller is a state-of-the-art digital control platform designed to reliably control and protect single-valve and single-pump steam turbines.

The benefits of dual redundancy maximise turbine reliability and availability.

Redundancy is managed at the operating system level using Woodward’s RTN (Real Time Network), allowing ultra-fast switching and ‘bufferless’ transitions.

The controller utilises the same unique PID architecture as the proven 505XT, making it the ideal controller for controlling speed, load,

parameters such as pumping collector pressure, exhaust collector pressure or connection line power. The dual redundant version inherits features such as the Opti-Tune self-tuning PID and ratio limiter.

The controller includes the following turbine protection dcs-sis.com features to ensure that the turbine and its driven loads (compressors, pumps, generators) operate within design limits:

– 3 critical speed avoidance bands

– Overspeed prediction and shutdown protection

– Configurable under- or over-pressure shutdown logic

– Minimum and maximum speed and load settings

– Maximum low-pressure stage overpressure limitation

– Minimum high pressure stage flow limiting

Ethernet and serial communications allow for easy integration into plant controls or process control systems.

The 505DR can be configured with an optional integrated user interface, including an 8.4-inch multi-language graphical display.
April 14, 2025 BY
IN Emerson

Emerson M-Series DC to DC System Power Supplies

About DeltaV™ System Power Supplies

Power supplies – systems can’t operate without them.DeltaV™ System Power Supplies provide you with the most efficient and reliable power solutions available.

DeltaV power supply kits provide power to the system electronics and to the field. This is all the power you need for your DeltaV system.

Benefits

DC/DC system power supplies are plug-and-play components. They fit any power carrier, including horizontal 2-width and vertical 4-width carriers.

These carriers contain an internal power bus that connects to the controller and I/O interfaces, eliminating the need for external wiring. The carriers are easily mounted on T-shaped DIN rails!

Flexible and cost-effective, DeltaV DC/DC system power dcs-sis.com supplies accept 12V DC and 24V DC input power.

Modular construction and load-sharing capabilities of the power supplies allow you to add more power to your system or provide power redundancy.

Safety. Your I/O is always accurate because I/O subsystems and controllers are always supplied with stable, accurate 12V DC or 5V DC power. Power supplies are EMC- and CSA-compliant; notification is immediate in the event of a power failure; and system and field power supplies are completely isolated.

Simplified system power supply. System power supplies provide more current on the 12 VDC I/O interface power bus, eliminating the need for 24 to 12 VDC bulk power supplies. All controller and I/O power is now available from the factory 24 VDC bulk power supply.

Menu

Search for products

Back to Top
Product has been added to your cart