Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Month: March 2025

Home / 2025 / March (Page 3)
March 24, 2025 BY
IN Prosoft

Prosoft PTQ-PDPMV1 PROFIBUS DP Master Network Interface Module

Configuration

ProSoft Configuration Builder (PCB) provides a PC-based software configuration solution for managing module configuration files and viewing communications and network diagnostics.

The PCB is a powerful solution not only for new configuration dcs-sis.com files, but also for importing configuration information from previous installations (known jobs) into new projects.

General Specifications

– Single slot – Quantum backplane compatible

– Module is recognised as an option module with access to PLC memory

for data transfer

– Configuration data is stored in the ProTalk® module’s non-volatile memory

– Microsoft Windows XP, 2000 and NT configuration software included with module

– Up to six modules can be placed in a rack

– Local rack – modules must be placed in the same rack as the processor

– Compatible with all common quantum programming software packages, including Concept

(version 2.6 or later), Unity Pro (version 2.2 or later), ProWORX (version 2.20 or later) (HSHS)

or higher) (HSBY for Unity Pro environments only)

– Quantum data types supported: 3x, 4x

– High-speed data transfer on the backplane provides fast data update times

– Sample ladder files available

Functional Specifications

– Easy-to-use bus view drag-and-drop configuration interface via ProSoft

Configuration Builder software (see PSW-PCB datasheet)

– Monitors and modifies process data and DPV1 acyclic data, and provides online slave diagnostics

– Supports PROFIBUS PA slaves on the network via DP/PA coupler or link

– Supports up to 125 slave devices via repeaters

– Supports extended diagnostic data (DPV1)

– Supports all standard baud rates up to 12 Mbits/s

– Automatic baud rate detection at all valid PROFIBUS DPV1 rates

– Supports parameter read/write operations according to PROFIdrive 3.1 standard

– Supports synchronisation and freeze commands

– Alarm indication and acknowledgement processing (DPV1)

– Support for multicast and broadcast messages (DPV1)

– Conformity of the slave configuration to the processor determined by CRC checksums

– Includes FDT/DTM PROFIBUS master transport communication DTM software (part number PSW-CDTM-PDPM)
March 24, 2025 BY
IN Prosoft

Prosoft RLX2-IHNF 802.11abgn Fast Industrial HotSpot™

The ProSoft Technology Rapid Industrial Hotspot (RLX2-IHNF) provides secure wireless solutions for factory floor, SCADA automation,

SCADA automation, process control systems and mobile worker Wi-Fi infrastructure.

It operates in 2.4 or 5 GHz bands, including DFS channels, for indoor or outdoor applications.

The hotspot supports access point, repeater and client modes. 802.11n technology provides fast data rates of up to 300 Mbps.

This provides excellent packet-per-second performance and robust communications in harsh industrial environments.

802.11n MIMO and channel bonding support demanding wireless applications such as Ethernet I/O and high-resolution video.

The included IH Browser configuration and monitoring dcs-sis.com software allows users to view network topology, assign IP addresses, monitor network diagnostics and update radio firmware.

The optional OPC Diagnostic Server is ideal for managing wireless SCADA networks over long distances.

Features and Benefits

EtherNet/IP™ or Modbus® based PLC/PACs can use message commands to read diagnostic information from the radio, helping to reduce downtime when troubleshooting wireless networks.

802.11i, WPA-2 Personal/Enterprise with 128-bit AES encryption secures the network RADIUS security secures the network with advanced authentication and encryption Virtual Local Area Networks (VLANs) enable secure network segmentation

Network Address Translation (NAT) eliminates the need for machine builders to change IP addresses every time a machine is deployed

Quality of Service (QoS) provides data prioritisation for I/O control devices, video data, etc.

Ultra-fast roaming (less than 10 milliseconds) maintains seamless, high-speed connectivity with one or more devices on mobile equipment and machines such as cranes, AGVs, and transporters as they move between access points

IGMP snooping and packet filtering optimise UDP multicast traffic for superior EtherNet/IP I/O communications

Supports communication with multiple Ethernet devices when used with existing third-party wireless infrastructure

Supports AeroScout RTLS (Real-Time Location Service) tags by passing signals from the tag to the network

Supports Power over Ethernet (PoE) to reduce cabling costs

Disaster recovery feature allows radio configurations to be stored on a microSD card for quick replacement in the field

Serial network connectivity (Modbus, DNP 3. etc.) via 802.11 wireless network

Simple local and remote configuration, monitoring and wireless network diagnostics via IH browser utility or SNMP
March 24, 2025 BY
IN GE

16-Point Discrete Input Module in GE IC200MDL240 VersaMax I/O Family

Product Description

The IC200MDL240 is a 16-point discrete input module in the VersaMax I/O family, formerly manufactured by GE Intelligent Platforms and now owned by Emerson Automation. The module has sixteen (16) channels of positive or source inputs that accept 120 VAC input signal voltages with a signal range of 0-132 VAC, 47-63 Hz, and a minimum user input current of 7 mA per point.The module has a backplane 5VDC output current of 110 mA.

About the IC200MDL240

The IC200MDL240 is a discrete input module from dcs-sis.com the VersaMax I/O platform formerly manufactured by GE Intelligent Platforms and now manufactured by Emerson Automation. The module is a sixteen (16) point discrete input module that supports forward logic or source wiring configurations. It can be used to connect field and electrical devices that provide binary or on/off signal states, such as auxiliary contacts, proximity sensors, pushbutton devices, limit switches, and similar devices.

This 16-point module accepts an input signal voltage range of 0-132 VAC, 47-63 Hz, with a nominal signal voltage of 120 VAC and a minimum on-state current of 7 mA.The input channels are divided into two (2) groups of eight (8) channels each with a dedicated common channel. Its group-to-group isolation is rated at 250 VAC for 1 minute and 1500 VAC. Similarly, the module’s optical isolation (logically isolated user inputs) as well as rack ground isolation are rated at 1500 VAC (1 minute) and 250 VAC (continuous).

The turn-on response time for each channel is 1 cycle with a minimum of 2 ms, while the turn-off response time is 2 ms. The turn-on state voltage is 70-132 VAC, and the turn-off state voltage range is 0-40 VAC. In addition, the turn-on state current is a minimum of 7 mA, while the turn-off state current is a maximum of 1.5 mA.

The IC200MDL240 is a DIN-rail mount type that supports both horizontal and vertical orientations. When the module is mounted vertically, there is no performance derating, but there is a 132 VAC derating.
March 24, 2025 BY
IN GE

IC698PSA350 PACSystem RX7i High Capacity Power Module

Description:

The IC698PSA350 is a power supply module for the PACSystem RX7i platform, currently part of Emerson Automation, formerly known as the General Electric Intelligent Platform (GE IP). This power supply mounts to the RX7i universal backplane. It has an input voltage range of 85 to 264 VAC 47 to 63 Hz and 100 to 150 VDC with a maximum input power of 440 watts (typical) and 500 watts (maximum). All three (3) outputs (e.g., 5 VDC, 12 VDC, and -12 VDC) have a maximum output power of 350 watts and output currents of 0-60 amps, 0-12 amps, and 0-4 amps, respectively.

The IC698PSA350 is a high capacity power supply module for the PACSystem RX7i controller family. The module is used to provide backplane power, which the module uses to activate internal circuitry and begin operation. The power supply module occupies one dcs-sis.com slot in the chassis and can only be installed in slot 0 of the RX7i chassis.

The IC698PSA350 operates with input voltages of 85 to 264 VAC, 100 to 150 VDC, and an AC input frequency of 47 to 63 Hz. The module is rated at 120/240 VAC and 125 VDC, and has input power requirements of 440 watts typical and 500 watts maximum. The power factor of this power supply module is 0.99 when used for AC input power.

The IC698PSA350 is a single-slot power supply module that mounts in the leftmost slot of the RX7i chassis or slot 0. It is equipped with various LED status indicators. It is equipped with various LED status indicators to help identify the module’s operating status. These include the “Field OK”, “Output OK”, and “Over Temperature” LEDs. The power module has built-in protection circuits such as over-temperature and over-voltage protection and airflow protection. A 70 CFM forced air cooling fan under the system chassis provides cooling air to the power supply module. If a stoppage in airflow is detected, the overheat LED will illuminate.

The IC698PSA350 power supply is available in both Series A and Series B. The Series A power supply has an internally mounted 0.25″ x 1.25″ fuse, while the Series B power supply has a 5 x 20 metre fuse. The fuses installed are 8A/250V fuses.

The IC698PSA350 power supply module is part of the RX7i series and is manufactured by GE Fanuc. The module can send logic level signals to the module via the backplane. It has a rated output power of 350 watts. The rated operating voltage is 120/240 VAC and 125 VDC. The power supply module operates at 47 to 63 Hz. The operating temperature range of the module is 0 to 60 degrees Celsius. The power supply module is equipped with an airflow sensor that easily detects a fan failure or a cessation of airflow around the drive. If either of these conditions occurs, the high temperature LED will light up. The sensor can be enabled or disabled via a jumper on the outside of the module.
March 24, 2025 BY
IN PCH Engineering

PCH Engineering PCH 1026 Digital Wind Turbine Structure Vibration Monitor

Purpose

– Long-term monitoring of low-frequency structural and seismic vibration

APPLICATIONS

– Wind turbines

– Tower vibration

– Drive train vibration (pitch turbines)

– Blade edge vibration (stall turbines)

– Steel towers

– Chimneys

– Bridges

– Buildings

– Seismic Vibration to ISO4866

Configuration and Setup

– Setup and configuration can be performed through the serial RS-232 port using the supplied Setup and Monitoring PC program, CHT 1012. All settings can be changed in the field.

– Setup and display can also be performed remotely from an external PC or controller (e.g., WTC or process controller) via an optional RS-485 connection.

– A log in the PC software records monitor-specific settings dcs-sis.com and identifies the instrument by its serial number.

Features

– 3 internal vibration sensors (accelerometers)

– Triaxial measurements in A, B and C directions

– Omni-directional tower monitoring

– Proven optimal tower monitoring

– Up to 4 different frequencies can be monitored independently, one frequency per transducer or up to 4 different frequencies per transducer

– Proven filter technology based on wind turbine application experience

– Measurement of RMS, Maximum, Peak or Peak values

– 1 – 4 independent industry standard 4-20mA outputs

– 4 independent alarm relays with programmable brake/break function and 1 system fault relay

– Programmable alarm thresholds and independent delay times for each alarm relay

– Internal continuous watchdog for sensors and electronic circuitry. Fault indication on system fault relay.

– Test functions for all sensors and electronic circuits.

– Designed for harsh environments including temperature, electrical noise interference and humidity.

– Customised monitoring algorithms are available to differentiate the customer from the competition.
March 24, 2025 BY
IN Uncategorized

PCH Engineering External Bidirectional Low Frequency Accelerometer CHB 1101

The CHB 1101 transmitter is an external bi-directional low frequency accelerometer for use with the PCH 1026 mk2 wind turbine and structural vibration monitor.

The external bi-directional accelerometer is used for advanced nacelle monitoring with distributed pick-up points.

Separate cables with integrated D-Sub and M12 connectors make installation and connection of the vibration monitor very simple.

Easy to install

The CHB 1101 has an internal memory chip which stores factory information: serial number, model number, sensitivity and self-test parameters.

When the CHB 1101 is connected, the monitor reads the dcs-sis.com information in the memory chip and automatically adapts to the settings of the particular sensor.

This means that the accelerometer can be freely replaced without having to manually change the parameters.

The monitor reads the chip every 30 seconds to verify that the accelerometer is still connected and recognised.

The monitor will stabilise for 20 seconds after power is applied.

The stabilisation time after disconnecting/connecting the CHB 1101 is 3 seconds. During settling, the PCH 1026 Mk2 will perform a self-test of the internal and external accelerometers.

Self-Test

The monitor will issue a system error message if the self-test fails or the accelerometer is disconnected.

Accelerometers must be specified in the PCH 1026 Vibration Monitor setup to use this feature.

The CHB 1101 accelerometer is an optional feature of the PCH 1026 Mk2 Wind Turbine and Structural Vibration Monitor.
March 24, 2025 BY
IN GE

IC694CEE001 Single Slot RX3i Carrier/Expansion Module

Product Description

The IC694CEE001 is a single-slot RX3i carrier/expansion module from GE.

It features an integrated PROFINET network interface and redundant 24 VDC power inputs.

The IC694CEE001 uses existing state-of-the-art RX3i or 90-30 series I/O for superior availability.

Optimal uptime and extreme flexibility reduce operating costs.

Functions

Scans all modules within a remote node (input and output scanning)

Publish data to the PROFINE IO controller on the PROFINET network during a user-specified production cycle

Receives data from PROFINET IO controllers on the dcs-sis.com PROFINET network during a user-specified production cycle

Manage PROFINET communications and module configuration between PROFINET IO controllers and modules within remote nodes.

Manage the status of I/O in the event of a communication outage

Publishing fault messages (alarms, diagnostics, etc.) to PROFINET IO controllers

Comprehensive programming and configuration services for all supported RX3i IO modules using Proficy Machine Edition

Supports daisy-chained/linear, star or ring (redundant media) network topologies

Two switched Ethernet ports: two eight-core RJ-45 shielded twisted-pair 10/100 Mbps copper interfaces

One USB port for field updating firmware using WinLoader
March 24, 2025 BY
IN GE

IS220YDIAS1A Discrete Contact Input/Output Module

Product Description.

The IS220YDIAS1A is a discrete contact input/output module from General Electric.

This module is designed for gas and steam industrial control in the Mark VIe Speedtronic control system.

The Mark VIe was the last Speedtronic system designed by GE and was one of a series of industrial control systems marketed under the Speedtonic name.

The IS220YDIAS1A is part of the Mark IVe control system dcs-sis.com or Mark VIeS functional safety system.

As an I/O block, it is designed to be plugged into specific terminal blocks such as the IS200STCIS1A and 2A, IS400STCIS1A or 2A or IS400TBCIS2C.

The IS220YDIAS1A has an on-board power supply with a nominal voltage of 28.0 VDC.

The contact inputs and contact wetted outputs have a maximum nominal voltage of 32 VDC.

The IS220YDIAS1A has both UL and CE approvals. It can be used in both hazardous and non-hazardous locations.

Hazardous location use ratings can be found in documents such as GE’s GEH-6725.

This I/O module is designed for use in ambient conditions from -35 to 65 degrees Celsius.

The IS220YDIAS1A is a well-designed module that can be easily mounted on the IS230 terminal board.

The simplicity of installation and availability of documentation make this module ideal for most applications.

Numerous indicator LEDs on the front of the module allow the user to read the status of the IS220YDIAS1A discrete input module.
March 24, 2025 BY
IN GE

Fanuc VMIVME-2120 64-bit High Voltage Digital Output Module

Features

– 64-bit high voltage output

– High current driver (600 mA sink current)

– Inrush current auto shutdown protection option

– Thermal shutdown protection option for driving incandescent lamps or inductive loads

– High breakdown voltage (55 V)

– Output clamp diode for inductive flyback protection

– Compatible with intelligent I/O controllers

– Built-in test logic for fault isolation

– Highly reliable DIN-type I/O connectors

– 8-, 16-, or 32-bit transmission

– Dual Eurocard form factor

– Separate board address decoding for control and dcs-sis.com data registers

– Optional pull-up resistors for electronic switch outputs

– Optional TTL outputs

– Front Panel with Fault LED

Functional Features

Compatibility: Compatible with VMEbus specification.

Double height form factor.

Output Connector Type: Dual 64-pin connector DIN 41612.

Output Organisation Eight ports, eight bits wide.

Addressable to any address within the Short-Circuit Monitor or Short-Circuit Unprivileged I/O map. Control and Status Register (CSR) addresses are independently selectable.

Address Modifier Codes: Short-circuit supervisory or short-circuit unprivileged I/O access can be selected via jumpers.

Factory configured for short-supervised I/O access.

Addressing Scheme: Eight ports can be individually addressed on 8-bit, 16-bit, or 32-bit boundaries.

CSR’s separate board address decoder allows hardware control addresses to be grouped for software efficiency.

Data Transfer Bus: A16: D8. D16. D32

Built-in Test: This product supports offline and real-time fault detection and isolation. Offline mode can be enabled by writing the CSR Set Test Mode bit.

When test mode is enabled, all outputs are off. When test mode is enabled, all outputs are off.

Fault LED: The Fault LED is illuminated at power-up and extinguished under program control after a successful diagnostic.

Output Functions: High current driver (600 mA sink current) outputs designed to drive incandescent lamps and inductive loads.

No external current limiting or warm-up resistors are required. Due to the presence of cold filament inrush currents, it is recommended that the output driver drive only one lamp.

However, if a single wire must drive more than one lamp, another driver must be connected in parallel.

If a single output must drive more than one bulb, it is recommended that the VMIVME-2131 (current source/sink)

or VMIVME-2130 (current source only) if the application allows.

The output drivers of the VMIVME-2131 and VMIVME-2130 may not support all VMIVME-2120 current sink (open collector) applications.

In addition, the power supply requirements for the VMIVME-2120 and VMIVME-213x are different.
March 24, 2025 BY
IN Emerson

Emerson A6500-UM Universal Measurement Card

The A6500-UM Universal Measurement Card is an integral part of the AMS 6500 ATG machine protection system.

The card is equipped with 2 sensor input channels (independent or combined, depending on the selected measurement mode).

The most common sensors can be used, such as eddy current, dcs-sis.com piezoelectric (accelerometers or velocimeters), seismic (electrodynamic),

LF (Low Frequency Bearing Vibration), Hall Effect and LVDT (in combination with A6500-LC) sensors.

In addition, the card contains five digital inputs and six digital outputs.

Measurement signals are transferred to the A6500-CC Com card via the internal RS 485 bus and converted to Modbus RTU and

The measurement signals are transferred to the A6500-CC Com Card via the internal RS 485 bus and converted to the Modbus RTU and Modbus TCP/IP protocols for further transmission to a host computer or analysis system.

Additionally, the Com Card can communicate with a PC/laptop connection via the USB interface on the panel, allowing the card to be configured and measurements to be displayed.

This allows the card to be configured and the measurement results to be displayed. Measurement results can also be output via 0/4 – 20 mA analogue outputs.

These outputs have a common ground and are electrically isolated from the system power supply.

The A6500-UM Universal Measurement Card operates in the A6500-SR system rack, which also provides the supply voltage and signal connections.

The A6500-UM Universal Measurement Card provides the following functions:

Absolute shaft vibration

Relative shaft vibration

Shaft eccentricity

Housing piezoelectric vibration

Thrust and rod position, differential and shell expansion, valve position

Velocity and keys

Menu

Search for products

Back to Top
Product has been added to your cart