Month: March 2025

The IC200ALG432 module is an analog module with mixed inputs. It is manufactured by GE Fanuc as a Versamax module.

About the IC200ALG432

The GE Fanuc IC200ALG432 module is a hybrid analog module that runs on a 10-volt DC power supply.

It is a 12-bit module equipped with 4 channels and 2 output channels.

The analog module has an update rate time of 0.4 milliseconds and an input response time of 5 milliseconds.

The analog module requires an external power supply to power the outputs. The inputs of the module are powered by the external power supply of the transceiver.

The CPU is present in the module that handles the operation. the IC200ALG432 module has LEDs on the front of the module that indicate the flow of power and backplane currents.

No thermal derating occurs in this hybrid module. the IC200ALG432 module draws a total of 160 milliamps of current during normal operation. including load current.

The diagnostic feature of the module helps to detect the loss of power on the user side.

It provides four channels and two channel outputs. The outputs require a 24V external power supply and the inputs are powered from the transceiver’s external power supply.

The CPU or NIU performs intelligent processing of the IC200ALG432 module. Includes 4 words of analog input data and 2 words of analog output data.

This IC200ALG432 uses LEDs to indicate the presence of user-side power for analog field-side circuits as well as backplane power.

The LEDs emit a green light when operating as intended. When properly installed, this module reports the loss of user-side power failure for field-side circuits and conveniently sets up jumpers for outputs.

The IC200ALG432 can be set to maintain the last state or default values even if the backplane or field power is temporarily interrupted. The module reports the loss of user-side power failures for field-side circuits.

About IC200DTX850

The IC200DTX850 terminal is a data display terminal manufactured by GE Intelligent Platforms/GE Fanuc for the GE Versamax product line.

These Versamax series data terminals, including the GE Fanuc IC200DTX850 terminal, are specifically designed for use in a variety of applications that

Including simple timer and counter applications, they can also display full text messages.

These terminals can be controlled by the user via a numeric keypad. Connecting a Versamax Nano or Micro PLC to the terminals is easy and requires no user configuration.

Because these Versamax terminals are pre-programmed, the GE Fanuc IC200DTX850 Operator Interface Terminal specifically supports up to 200 stored messages.

The GE Fanuc IC200DTX850 Data Display Terminal also has an LCD backlight for the screen.

It has a keypad with 8 keys for control functions and requires the IC200BL555 cable or equivalent to support its operator interface.

The data panel operates on an external power supply rated at 24 volts DC and 50 milliamps.

The GE Fanuc Versamax IC200DTX850 data display terminal measures approximately 182 x 101 x 37 mm.

It has an operating temperature range of 0 to 50 degrees Celsius.

The IC200DTX850 data interface terminal has an RS-232 serial port for communication purposes.

This port is designed for different commands, including serial input/output commands, Modbus RTU slave commands or SNP slave commands.

In addition, this data terminal is compatible with the Data Designer software.

The Versamax controllers compatible with this terminal are available in micro and nano models, which are small in size, while offering powerful control and a high level of performance.