Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0
February 27, 2025 BY
IN ABB

ABB’s new Carlon fan-rated ceiling boxes raise the bar on home safety

.Engineered to meet the latest industry standards, the new Carlon® Blue™ fan-rated ceiling boxes from ABB Installation Products help protect and power residential and light commercial installations

.Supports growing demand for energy-efficient ceiling fans in home improvements and new construction

.Sustainably produced in Tennessee, extensively tested and backed by an Environmental Product Declaration, Carlon® Blue™ non-metallic electrical boxes are trusted by contractors and homeowners

More than 70% of American households have at least one ceiling fan, and nearly a quarter use four or more. Increasing demand for energy-efficient ceiling fans with integrated technology and smart features is spurring the need for properly rated support. The new Carlon® Blue™ fan-rated ceiling boxes from ABB Installation Products are engineered for easy installation and to safely support a fan’s weight, vibration and movement, in compliance with the latest National Electric Code (NEC) outlet box requirements for ceiling-suspended fans.

Improperly installed ceiling fans lead to an estimated 20.000 injuries annually in the United States. To help improve home safety, the 2020 NEC requires ceiling outlet boxes in homes, including rooms where ceiling fans may be installed now or later, to either be listed for the sole support of ceiling-suspended fans or provide access to structural framing capable of supporting a ceiling fan bracket. ABB’s Carlon Blue ceiling boxes are rated for a 50-pound light fixture and 35-pound ceiling fan, with vibration-resistant screws through reinforced metal brackets that provide greater strength than plastic alone.

“Ceiling fans are used year-round in millions of homes and are often an overlooked safety risk. Our new Carlon Blue fan-rated ceiling boxes address the needs of contractors and homeowners for a safe, smart and sustainable solution,” said Jack Bellissimo, Senior Vice President, Product Management, Marketing & Strategy, ABB Installation Products. “Authentic Carlon boxes in our distinctive blue color are responsibly produced in Tennessee and meet the 2020 NEC code to perform safely and reliably.”
February 27, 2025 BY
IN ABB

ABB Harnessflex Interconnect™ System

Harnessflex Interconnect™ System

A Multi-Sleeve Adaptor for the fastening of Harnessflex fittings and connector interfaces to braiding, sleeving, heat-shrink, self-close wrap and other common forms of cable protection.

Harnesflex Interconnect™ System (Multi-Sleeve Adaptor), allows free rotation of braid and sleeving relative to backshell or fitting, reducing strain, intrusion and impact damage – all of which can lead to electrical faults and vehicle failure.

The Multi-Sleeve Adaptor (MSA/MSAR) is compatible with Harnessflex hinged fittings and connector interfaces.

Features & benefits:

Easily secured with Ty-Rap® cable ties or Harnessflex Multi-Function clips

Hold cable bundles inside conduit

Smooth cable entry and bore

Easy assembly

External hinged connector interfaces – tough and durable protection for OEM connectors against high pressure wash-down, excessive cable strain and abrasion

Connect seamlessly with Multi-Sleeve Adaptor

Internal conduit backstop provide insertion guide ensuring system integrity and high pull off strength

Hold cable bundles inside slit conduit and reduce risk of cables protruding out

Reduce vibration risk by minimising impact of cable on conduit inner wall
February 27, 2025 BY
IN MAN

MAN Diesel Master Control Unit 1881610-7

Operation and Safety:

It is essential to adhere to the safety regulations and operational guidelines provided by MAN Diesel & Turbo to ensure safe and accurate operation of the Master Control Unit.

Proper maintenance and timely troubleshooting are crucial to maintaining the reliability and efficiency of the system.

Additional Information:

Contact MAN Diesel & Turbo or its authorized service centers for detailed technical specifications, user manuals, and maintenance guidelines specific to the MAN Diesel Master Control Unit 1881610-7.

This description provides a concise overview of the key features, functionality, and technical specifications of the MAN Diesel Master Control Unit 1881610-7.

I. Product Overview

Model and Manufacturer: Model 1881610-7. manufactured by MAN Diesel & Turbo.

Use: As a key part of the marine engine control system, it is used to monitor, control and optimize the power system of diesel engines.

II. Technical features

Fault indication: with binary fault indication function, it is able to quickly recognize and indicate system faults.

Expandability: Expansion cable assemblies may be fitted to provide flexible interconnection options to support the transfer of bus signals and power between components.

Fault Reset: A fault reset button may be provided on the control panel to allow immediate action in the event of a fault.

Fault Tolerant System: A fault tolerant system is designed to ensure a degree of correct operation even in the event of a hardware or software failure.

III. Operation and Maintenance

Operating instructions: Users should refer to the operating instructions and safety regulations provided by MAN Diesel & Turbo for operation to ensure safe and accurate operation of the system.

Maintenance Requirements: Regular maintenance and inspection is the key to ensure long-term stable operation of the system. This includes cleaning, tightening, and replacing worn parts.

Troubleshooting: The system may be equipped with troubleshooting tools or software to help users quickly identify and solve problems.
February 27, 2025 BY
IN GE

04220FL11232A RXI Controller

Overview of GE RXI controller

GE RXI controller is a high-performance, high-reliability control system introduced by GE Intelligent Platform. It utilizes cutting-edge CPU technology, market-leading industrial Ethernet network technology, and a unique user interface to provide equipment manufacturers and end-users with the most efficient and reliable control system.

Third, the GE RXI controller parameters in detail

Processor: The GE RXI controller utilizes a high-performance dual-core CPU to ensure efficient system operation.

Memory: The RXi Box IPC has 4G RAM memory to support high-performance designs.

Storage System: 32GB industrial-grade SSD comes standard, while an optional 250GB hard disk is provided to ensure safe data storage.

Network Interface: Supports Gigabit PROFINET (with built-in MRP redundancy) and Ethernet ports to provide high-speed data transfer capability.

Wireless communication: Optional WLAN function enables wireless communication through the internal Mini PCIe card holder.

Serial communication: RS-232 port (RJ-45) is provided to support serial communication needs.

Video/Graphic Interface: VGA port is supported for resolutions up to 2560×1440 @60Hz.

Audio: Provides micro DIN audio socket via IFP.

USB Interface: Provides two USB 2.0 standard ports for easy connection of external devices.

IV. Features of GE RXI Controller

Unique Intelligent Display Module: Provides configuration and maintenance functions for the controller without the need for additional software for easy operation.

High-performance control: Ensures efficient system operation through technologies such as high-performance dual-core CPU and Gigabit PROFINET.

Compact form factor: PROFINET-based design provides a small form factor solution for equipment manufacturers and *end users.

Highly Flexible Distributed I/O Functionality: Supports a variety of expansion slots to meet a wide range of industrial automation needs.

High Reliability: Adoption of industrial temperature grade components, combined with patented thermal monitoring technology and advanced passive cooling technology, ensures reliable operation in harsh environments.
February 27, 2025 BY
IN GE

IC200ERM002 Non-Isolated Expansion Module

About the IC200ERM002

The GE Fanuc IC200ERM002 module is a non-isolated expansion receiver module that is part of the Versamax family.

This expansion module is used to enhance the functionality of a Versamax PLC or I/O output station and also increases the number of modules that can be connected.

The IC200ERM002 Expansion Module has a **capacity of 7 racks with up to 8 modules per rack*.

It requires an installed power supply to power all connected devices.

When an additional power supply or booster carrier is used, it should be connected to the mains power supply on the IC200ERM002 Expansion Module.

It also features 3 on-board LEDs to indicate the operational status of the device.

The module can also be used as a single-ended or multi-rack Versamax I/O expansion system.

Where the module is used in a multi-rack implementation, the total cable length cannot exceed 50 feet or 15 meters.

When the Versamax GE Fanuc IC200ERM002 Non-Isolated Expansion Receiver Module is used in a single-ended system with only 1 expansion rack, the

The cable length should not exceed 3.3 feet or 1 meter.

It has a data rate of 2.765 Mbps or 5 Mbps, depending on the implementation used.

The GE Fanuc IC200ERM002 expansion module is equipped with two 26-pin D-shell expansion female ports.

In addition, it has two different current consumption ratings with a 3.3 volt or 5 volt backplane rating.

When the backplane voltage is 5 volts, the current consumption is rated at 70 milliamps and when the backplane voltage is rated at 20.3 volts, the current consumption is rated at 3 milliamps.
February 27, 2025 BY
IN GE

IC200MDD841 High-Speed Counter Module

About the IC200MDD841

The IC200MDD841 module is a high-speed counter module manufactured by GE Fanuc.

It is part of the Versamax series and has mixed discrete inputs and outputs, including 12 positive logic outputs and 20 positive logic inputs, some of which are configurable.

Devices connected to these I/O connectors have two states: on and off.

The GE Fanuc IC2MDD200 module has no protection features, such as internal fuses or isolation of individual channels.

It supports a variety of input and output configuration settings, such as pulse-width modulation, ramp pulse train, pulse train, and high-speed counters.

When this module is set to its default configuration, it has 841 Type A high-speed counter outputs and inputs.

These high-speed counters process pulse signals at 4 kHz. In addition, in the default configuration, the module has 80 standard outputs and 8 standard inputs.

The backplane powers the GE Fanuc IC200MDD841 high-speed counter module, but a separate power supply powers all external output devices.

When the module is connected to a backplane power supply rated at 5 volts, it draws 30 milliamps of current.

The inputs and outputs of the IC200MDD841 module operate at 24 volts DC.

The module’s on/off state current ratings are 3 to 8 mA/0 to 0.5 mA, respectively.

It measures 66.8 mm or 2.63 inches long, 110 mm or 4.3 inches wide, and 50 mm or 1.956 inches deep.

The high-speed counter module provides error detection and displays up to 13 words of status data.

It has on-board LEDs that display device status information.
February 27, 2025 BY
IN Parker

Parker AC Variable Frequency Drives HP Rated-AC30 Series

Working with the five principles of Flexibility, Simplicity, Reliability, Connectivity and Capability our engineers have created a product focussed on making the benefits of quality motor control available to every business.

Parker provides easy to use software tools for all levels of experience; enabling users to address any application. Simple applications can be setup in seconds and more complex applications can be configured in the simplest and most logical way.

Programming can be via the keypad, DSELite, Parker Drive QuickTool software or the Codysys based Parker Developer with full IEC 61131 PLC Functionality.

The AC30 provides users with access to a large library of application macros and worked examples. While users are free to develop their own applications, they can also save time and development cost by accessing and customising  examples of completed solutions.

To enable connectivity into a wide range of automation systems the AC30 features Profinet and Ethernet IP through dual Ethernet ports, as well as Modbus TCP IP with client and server functionality.

That makes the AC30 series compatible with more than 80 percent of automation architecture; there is no need for expensive add-ons or upgrade modules.

The Ethernet protocols also provide potential for intelligent data analytics and connection to external servers – opening up links to the cloud or big data

functionality.

So whether for standalone use or for integration into a complex automation system, the AC30 offers an easy to use solution for both simple and advanced motor control applications.
February 27, 2025 BY
IN Parker

Parker Variable Speed Drives – AC15 Series

Description

The AC15 Compact Drive is a simple to use, reliable and economical solution for every-day motor control applications that require speed or torque control in the power range of 0.37 kW to 30 kW (0.5 to 40 HP).

With compact dimensions and features normally only associated with higher specification drives, including Safe Torque Off, Ethernet communications,

sensorless vector mode for control of both Permanent Magnet (PMAC) and AC induction motors and a full 150 % overload for 1 minute, AC15 provides

an optimized solution for OEM machine builders looking for a compact, cost-effective drive without compromising on performance.

Simplicity

AC15 is designed to reduce the time and effort required to install, setup and commission through it’s easy to use integrated keypad and application

macros, or the powerful DSE Lite software tool and rich function block set. Minimal wiring requirements and easily accessed terminals make AC15 quick and

easy to install. Auto-tuning sensorless vector mode takes AC15 beyond simple V/Hz control allowing users requiring greater dynamic speed or torque control for their application to benefit from the drive’s enhanced speed and torque accuracy.

Reliability

Proven technology and manufacturing techniques ensure AC15 has been engineered and built to deliver consistently outstanding levels of performance day in, day out, ensuring maximum uptime and productivity.

Thanks to its conformally coated PC boards, AC15 is capable of withstanding class C3 environments, allowing you to operate AC15 with the utmost confidence in more applications.

Applications

AC15 provides a straight-forward approach to general purpose industrial motor control applications across a wide range of industries, giving users the benefits of the inherent energy-saving properties of using a variable speed drive, as well as the improved reliability and extended service life benefits associated with smoother starting and stopping of regularly cycling loads.

Typical applications for AC15 include…

• Conveyor

• Centrifuge

• Fans

• Mixers

• Packaging Machines

• Textile Machines

• Strapping Machines

• Labelling Machines

• Industrial Washing Machines

• Machine Tool Spindles

• Roller Doors
February 27, 2025 BY
IN Parker

Parker AC890 Compact Modular System AC Drive

Markets:

“Water and Wastewater Treatment

·Pulp and Paper

·Steel Mills

·Marine

·Cranes

.Wind and Solar Power

.Food and Chemical Processing

Features and Benefits.

The AC890 can be configured for 4 different modes of operation .

open-oop (volts/frequency) control

This mode is ideal for basic, single or multi-motor speed control.Sensorless vector controlWith its ultra high performance sensorless vector algorithm,the Ac890 delivers a combination of both high torgue and close speedregulation without the need for any speed measuring transducer.Closed-loop vector control

Full closedloop flux vector performance can be achieved with the Ac890 by simply adding an encoder feedback ‘technology box. Thisprovides 1 00% continuous full load standstilltorque, plus a highly dynamic speed loop more than suficient for the most demanding applications.

4 Quadrant active front-end power supply moduleharmonic content is achieved (THD< 3%)

With this confauration, the eneray is fed back into the mains supply with sinusoidal currents and unity power factor a very low curen

Applications:

.Slitting Lines

.Hot and Cold Saws

.Forming Rolls

.Printing Lines

.Fans, Pumps, and Blowers

.Water Treatment

.Wind Turbines

.Solar Power

.Engine Testing
February 27, 2025 BY
IN A-B

A-B 1336E-B075-AE-EN-HA2-L6 Adjustable Frequency Drive

It is rated at 380 to 480 volts AC, 56 kilowatts and 75 horsepower.

It is equipped with a programmer/controller with digital potentiometer HMI to simplify drive control and programming.

Up to 16 programmable speed command transitions are available on the drive, which supports SCANport communications and English as the programming language.

The 1336E-B075-AE-EN-HA2-L6 IMPACT drive is designed to provide unrivaled speed control.

The diagnostic features on this drive allow real-time monitoring of its logic board and power structure.

It has 32 entry fault queues and 32 entry warning queues with markers for clearing faults and timestamping power-ups.

Flying start mode on this drive applies to motors that are already spinning loads.

As with all B-frame 1336 IMPACT drives, the 1336E-B075-AE-EN-HA2-L6 drive does not support network connectivity through an isolated gateway.

Its memory storage is non-volatile, and it has a NEMA 1 (IP20)/EMC enclosure and a 115-volt AC control interface.

The function blocks on this drive provide greater flexibility than other drives.

Connecting the 1336E-B075-AE-EN-HA2-L6 IMPACT Drive to a Motor Using a Long Cable

Cable terminators or output chokes may be required to minimize voltage reflections at the motor terminals.

It can be fitted with different types of cables including shielded, unshielded and armored cables.

The drive is designed to use a three-phase power supply that is symmetrical to ground and supports the use of a line reactor or isolation transformer if the power supply encounters power line conditions that could cause a fault.

This 1336 PLUS II adjustable frequency AC drive is a 380-480VAC unit with 56 (75) kilowatts (kW) of power (horsepower) and has an (n) NEMA 1 (IP20)/EMC enclosure.

Menu

Search for products

Back to Top
Product has been added to your cart